HTML5

These attributes only apply to an input element if its type attribute is in a state whose definition declares that the attribute applies. When an attribute doesn't apply to an input element, user agents must ignore the attribute, regardless of the requirements and definitions below.

Each input element has a resulting autocompletion state, which is either on or off.

When an input element is in one of the following conditions, the input element's resulting autocompletion state is on; otherwise, the input element's resulting autocompletion state is off:

• Its autocomplete attribute is in the on state.
• Its autocomplete attribute is in the default state, and the element has no form owner.
• Its autocomplete attribute is in the default state, and the element's form owner's autocomplete attribute is in the on state.

When an input element's resulting autocompletion state is on, the user agent may store the value entered by the user so that if the user returns to the page, the UA can prefill the form. Otherwise, the user agent should not remember the control's value, and should not offer past values to the user.

In addition, if the resulting autocompletion state is off, values are reset when traversing the history.

The autocompletion mechanism must be implemented by the user agent acting as if the user had modified the element's value, and must be done at a time where the element is mutable (e.g. just after the element has been inserted into the document, or when the user agent stops parsing).

<p><label>Account: <input type="text" name="ac" autocomplete="off"></label></p>
<p><label>PIN: <input type="password" name="pin" autocomplete="off"></label></p>

A user agent may allow the user to override the resulting autocompletion state and set it to always on, always allowing values to be remembered and prefilled), or always off, never remembering values. However, the ability to override the resulting autocompletion state to on should not be trivially accessible, as there are significant security implications for the user if all values are always remembered, regardless of the site's preferences.

The suggestions source element is the first element in the document in tree order to have an ID equal to the value of the list attribute, if that element is a datalist element. If there is no list attribute, or if there is no element with that ID, or if the first element with that ID is not a datalist element, then there is no suggestions source element.

If there is a suggestions source element, then, when the user agent is allowing the user to edit the input element's value, the user agent should offer the suggestions represented by the suggestions source element to the user in a manner suitable for the type of control used. The user agent may use the suggestion's label to identify the suggestion if appropriate. If the user selects a suggestion, then the input element's value must be set to the selected suggestion's value, as if the user had written that value himself.

User agents must filter the suggestions to hide suggestions that the user would not be allowed to enter as the input element's value, and should filter the suggestions to hide suggestions that would cause the element to not satisfy its constraints.

---

If the list attribute does not apply, there is no suggestions source element.

<label>Homepage: <input name=hp type=url list=hpurls></label>
<datalist id=hpurls>
 <option value="http://www.google.com/" label="Google">
 <option value="http://www.reddit.com/" label="Reddit">
</datalist>

<p>
 <label>
  Enter a breed:
  <input type="text" name="breed" list="breeds">
  <datalist id="breeds">
   <option value="Abyssinian">
   <option value="Alpaca">
   <!-- ... -->
  </datalist>
 </label>
</p>

<p>
 <label>
  Enter a breed:
  <input type="text" name="breed" list="breeds">
 </label>
 <datalist id="breeds">
  <label>
   or select one from the list:
   <select name="breed">
    <option value=""> (none selected)
    <option>Abyssinian
    <option>Alpaca
    <!-- ... -->
   </select>
  </label>
 </datalist>
</p>

Constraint validation: If the readonly attribute is specified on an input element, the element is barred from constraint validation.

<form action="products.cgi" method=post enctype="multipart/form-data">
 <table>
  <tr> <th> Product ID <th> Product name <th> Price <th> Action
  <tr>
   <td> <input readonly name="1.pid" value="H412">
   <td> <input required name="1.pname" value="Floor lamp Ulke">
   <td> $<input required type=number min=0 step=0.01 name="1.pprice" value="49.99">
   <td> <button formnovalidate name="action" value="delete:1">Delete</button>
  <tr>
   <td> <input readonly name="2.pid" value="FG28">
   <td> <input required name="2.pname" value="Table lamp Ulke">
   <td> $<input required type=number min=0 step=0.01 name="2.pprice" value="24.99">
   <td> <button formnovalidate name="action" value="delete:2">Delete</button>
  <tr>
   <td> <input required name="3.pid" value="" pattern="[A-Z0-9]+">
   <td> <input required name="3.pname" value="">
   <td> $<input required type=number min=0 step=0.01 name="3.pprice" value="">
   <td> <button formnovalidate name="action" value="delete:3">Delete</button>
 </table>
 <p> <button formnovalidate name="action" value="add">Add</button> </p>
 <p> <button name="action" value="update">Save</button> </p>
</form>

If the attribute is present, then its value must be parsed using the rules for parsing non-negative integers, and if the result is a number greater than zero, then the user agent should ensure that at least that many characters are visible.

The size IDL attribute is limited to only non-negative numbers greater than zero and has a default value of 20.

Constraint validation: If the element is required, and its value IDL attribute applies and is in the mode value, and the element is mutable, and the element's value is the empty string, then the element is suffering from being missing.

<h1>Create new account</h1>
<form action="/newaccount" method=post>
 <p>
  <label for="username">E-mail address:</label>
  <input id="username" type=email required name=un>
 <p>
  <label for="password1">Password:</label>
  <input id="password1" type=password required name=up>
 <p>
  <label for="password2">Confirm password:</label>
  <input id="password2" type=password onforminput="setCustomValidity(value != password1.value ? 'Passwords do not match.' : '')">
 <p>
  <input type=submit value="Create account">
</form>

<label>Cc: <input type=email multiple name=cc></label>

<label>Cc: <input type=email multiple name=cc list=contacts></label>
...
<datalist id="contacts">
 <option value="hedral@damowmow.com">
 <option value="pillar@example.com">
 <option value="astrophy@cute.example">
 <option value="astronomy@science.example.org">
</datalist>

<label>Attachments: <input type=file multiple name=att></label>

What are you doing? <input name=status maxlength=140>

Constraint validation: If the element's value is not the empty string, and the element's pattern attribute is specified and the attribute's value, when compiled as a JavaScript regular expression with the global, ignoreCase, and multiline flags disabled (see ECMA262 Edition 5, sections 15.10.7.2 through 15.10.7.4), compiles successfully but the resulting regular expression does not match the entirety of the element's value, then the element is suffering from a pattern mismatch. [ECMA262]

This implies that the regular expression language used for this attribute is the same as that used in JavaScript, except that the pattern attribute must match the entire value, not just any subset (somewhat as if it implied a ^(?: at the start of the pattern and a )$ at the end).

<label> Part number:
 <input pattern="[0-9][A-Z]{3}" name="part"
        title="A part number is a digit followed by three uppercase letters."/>
</label>

A part number is a digit followed by three uppercase letters.
You cannot submit this form when the field is incorrect.

Their syntax is defined by the section that defines the type attribute's current state.

If the element has a min attribute, and the result of applying the algorithm to convert a string to a number to the value of the min attribute is a number, then that number is the element's minimum; otherwise, if the type attribute's current state defines a default minimum, then that is the minimum; otherwise, the element has no minimum.

Constraint validation: When the element has a minimum, and the result of applying the algorithm to convert a string to a number to the string given by the element's value is a number, and the number obtained from that algorithm is less than the minimum, the element is suffering from an underflow.

The min attribute also defines the step base.

If the element has a max attribute, and the result of applying the algorithm to convert a string to a number to the value of the max attribute is a number, then that number is the element's maximum; otherwise, if the type attribute's current state defines a default maximum, then that is the maximum; otherwise, the element has no maximum.

Constraint validation: When the element has a maximum, and the result of applying the algorithm to convert a string to a number to the string given by the element's value is a number, and the number obtained from that algorithm is more than the maximum, the element is suffering from an overflow.

If an element has a maximum that is less than its minimum, then so long as the element has a value, it will either be suffering from an underflow or suffering from an overflow.

<input name=bday type=date max="1979-12-31">

<input name=quantity required type=number min=1 value=1>

The attribute provides the allowed value step for the element, as follows:

1. If the attribute is absent, then the allowed value step is the default step multiplied by the step scale factor.
2. Otherwise, if the attribute's value is an ASCII case-insensitive match for the string "any", then there is no allowed value step.
3. Otherwise, if the rules for parsing floating point number values, when they are applied to the attribute's value, return an error, zero, or a number less than zero, then the allowed value step is the default step multiplied by the step scale factor.
4. Otherwise, the allowed value step is the number returned by the rules for parsing floating point number values when they are applied to the attribute's value, multiplied by the step scale factor.

The step base is the result of applying the algorithm to convert a string to a number to the value of the min attribute, unless the element does not have a min attribute specified or the result of applying that algorithm is an error, in which case the step base is the default step base, if one is defined, or zero, if not.

Constraint validation: When the element has an allowed value step, and the result of applying the algorithm to convert a string to a number to the string given by the element's value is a number, and that number subtracted from the step base is not an integral multiple of the allowed value step, the element is suffering from a step mismatch.

<input name=opacity type=range min=0 max=1 step=0.00392156863>

<input name=favtime type=time step=any>

User agents should present this hint to the user, after having stripped line breaks from it, when the element's value is the empty string and the control is not focused (e.g. by displaying it inside a blank unfocused control).

<fieldset>
 <legend>Mail Account</legend>
 <p><label>Name: <input type="text" name="fullname" placeholder="John Ratzenberger"></label></p>
 <p><label>Address: <input type="email" name="address" placeholder="john@example.net"></label></p>
 <p><label>Password: <input type="password" name="password"></label></p>
 <p><label>Description: <input type="text" name="desc" placeholder="My Email Account"></label></p>
</fieldset>

The value IDL attribute allows scripts to manipulate the value of an input element. The attribute is in one of the following modes, which define its behavior:

value

On getting, it must return the current value of the element. On setting, it must set the element's value to the new value, set the element's dirty value flag to true, and then invoke the value sanitization algorithm, if the element's type attribute's current state defines one.

default

On getting, if the element has a value attribute, it must return that attribute's value; otherwise, it must return the empty string. On setting, it must set the element's value attribute to the new value.

default/on

On getting, if the element has a value attribute, it must return that attribute's value; otherwise, it must return the string "on". On setting, it must set the element's value attribute to the new value.

filename

On getting, it must return the string "C:\fakepath\" followed by the filename of the first file in the list of selected files, if any, or the empty string if the list is empty. On setting, if the new value is the empty string, it must empty the list of selected files; otherwise, it must throw an INVALID_STATE_ERR exception.

---

The checked IDL attribute allows scripts to manipulate the checkedness of an input element. On getting, it must return the current checkedness of the element; and on setting, it must set the element's checkedness to the new value and set the element's dirty checkedness flag to true.

---

The files IDL attribute allows scripts to access the element's selected files. On getting, if the IDL attribute applies, it must return a FileList object that represents the current selected files. The same object must be returned until the list of selected files changes. If the IDL attribute does not apply, then it must instead return null. [FILEAPI]

---

The valueAsDate IDL attribute represents the value of the element, interpreted as a date.

On getting, if the valueAsDate attribute does not apply, as defined for the input element's type attribute's current state, then return null. Otherwise, run the algorithm to convert a string to a Date object defined for that state; if the algorithm returned a Date object, then return it, otherwise, return null.

On setting, if the valueAsDate attribute does not apply, as defined for the input element's type attribute's current state, then throw an INVALID_STATE_ERR exception; otherwise, if the new value is null, then set the value of the element to the empty string; otherwise, run the algorithm to convert a Date object to a string, as defined for that state, on the new value, and set the value of the element to resulting string.

---

The valueAsNumber IDL attribute represents the value of the element, interpreted as a number.

On getting, if the valueAsNumber attribute does not apply, as defined for the input element's type attribute's current state, then return a Not-a-Number (NaN) value. Otherwise, if the valueAsDate attribute applies, run the algorithm to convert a string to a Date object defined for that state; if the algorithm returned a Date object, then return the time value of the object (the number of milliseconds from midnight UTC the morning of 1970-01-01 to the time represented by the Date object), otherwise, return a Not-a-Number (NaN) value. Otherwise, run the algorithm to convert a string to a number defined for that state; if the algorithm returned a number, then return it, otherwise, return a Not-a-Number (NaN) value.

On setting, if the valueAsNumber attribute does not apply, as defined for the input element's type attribute's current state, then throw an INVALID_STATE_ERR exception. Otherwise, if the valueAsDate attribute applies, run the algorithm to convert a Date object to a string defined for that state, passing it a Date object whose time value is the new value, and set the value of the element to resulting string. Otherwise, run the algorithm to convert a number to a string, as defined for that state, on the new value, and set the value of the element to resulting string.

---

The stepDown(n) and stepUp(n) methods, when invoked, must run the following algorithm:

1. If the stepDown() and stepUp() methods do not apply, as defined for the input element's type attribute's current state, then throw an INVALID_STATE_ERR exception, and abort these steps.

2. If the element has no allowed value step, then throw an INVALID_STATE_ERR exception, and abort these steps.

3. If applying the algorithm to convert a string to a number to the string given by the element's value results in an error, then throw an INVALID_STATE_ERR exception, and abort these steps; otherwise, let value be the result of that algorithm.

4. Let n be the argument, or 1 if the argument was omitted.

5. Let delta be the allowed value step multiplied by n.

6. If the method invoked was the stepDown() method, negate delta.

7. Let value be the result of adding delta to value.

8. If the element has a minimum, and the value is less than that minimum, then throw a INVALID_STATE_ERR exception.

9. If the element has a maximum, and the value is greater than that maximum, then throw a INVALID_STATE_ERR exception.

10. Let value as string be the result of running the algorithm to convert a number to a string, as defined for the input element's type attribute's current state, on value.

11. Set the value of the element to value as string.

---

The list IDL attribute must return the current suggestions source element, if any, or null otherwise.

The selectedOption IDL attribute must return the first option element, in tree order, to be a child of the suggestions source element and whose value matches the input element's value, if any. If there is no suggestions source element, or if it contains no matching option element, then the selectedOption attribute must return null.

4.10.7.4 Common event behaviors

When the input event applies, any time the user causes the element's value to change, the user agent must queue a task to fire a simple event that bubbles named input at the input element, then broadcast forminput events at the input element's form owner. User agents may wait for a suitable break in the user's interaction before queuing the task; for example, a user agent could wait for the user to have not hit a key for 100ms, so as to only fire the event when the user pauses, instead of continuously for each keystroke.

Examples of a user changing the element's value would include the user typing into a text field, pasting a new value into the field, or undoing an edit in that field. Some user interactions do not cause changes to the value, e.g. hitting the "delete" key in an empty text field, or replacing some text in the field with text from the clipboard that happens to be exactly the same text.

When the change event applies, if the element does not have an activation behavior defined but uses a user interface that involves an explicit commit action, then any time the user commits a change to the element's value or list of selected files, the user agent must queue a task to fire a simple event that bubbles named change at the input element, then broadcast formchange events at the input element's form owner.

An example of a user interface with a commit action would be a File Upload control that consists of a single button that brings up a file selection dialog: when the dialog is closed, if that the file selection changed as a result, then the user has committed a new file selection.

Another example of a user interface with a commit action would be a Date control that allows both text-based user input and user selection from a drop-down calendar: while text input might not have an explicit commit step, selecting a date from the drop down calendar and then dismissing the drop down would be a commit action.

When the user agent changes the element's value on behalf of the user (e.g. as part of a form prefilling feature), the user agent must follow these steps:

1. If the input event applies, queue a task to fire a simple event that bubbles named input at the input element.
2. If the input event applies, broadcast forminput events at the input element's form owner.
3. If the change event applies, queue a task to fire a simple event that bubbles named change at the input element.
4. If the change event applies, broadcast formchange events at the input element's form owner.

In addition, when the change event applies, change events can also be fired as part of the element's activation behavior and as part of the unfocusing steps.

The task source for these tasks is the user interaction task source.