The presentation of this document has been augmented to identify changes from a previous version. Three kinds of changes are highlighted: new, added text, changed text, and deleted text. NOTE: the status section of the document has not been augmented to identify changes from a previous version.
This document is also available in these non-normative formats: PDF, PostScript, XML, and plain text.
Copyright © 2007 W3C® (MIT, ERCIM, Keio), All Rights Reserved. W3C liability, trademark and document use rules apply.
The Web Services Policy 1.5 - Framework provides a general purpose model and corresponding syntax to describe the policies of entities in a Web services-based system.
Web Services Policy Framework defines a base set of constructs that can be used and extended by other Web services specifications to describe a broad range of service requirements and capabilities.
This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.
This is a Proposed Recommendation of the Web Services Policy 1.5 - Framework specification. The W3C Membership and other interested parties are invited to review the document through 17 August 2007. Advisory Committee Representatives should consult their WBS questionnaires. Note that substantive technical comments were expected to have been received during the Last Call review period that ended 12 January 2007.
The Working Group's implementation report demonstrates that the goals for interoperable implementations, set in the Candidate Recommendation draft of this document, were achieved. None of the features were identified as "features at risk" by the Web Services Policy Working Group.
Publication as a Proposed Recommendation does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress. This specification will remain a Proposed Recommendation until at least 17 August 2007.
This Proposed Recommendation was produced by the members of the Web Services Policy Working Group, which is part of the W3C Web Services Activity. The Working Group expects to advance this Working Draft to Recommendation Status.
A list of changes in this version of the document and a diff-marked version against the previous version of this document are available. Changes in this version of the document encompass various clarifications related to policy intersection, interpretation of multiple assertions, ignorable assertions and the distributive rule in policy normalization.
The Working Group is tracking all comments via Bugzilla and highly prefers to receive comments via this system. If access to Bugzilla is not feasible, you may send your comments to the mailing list public-ws-policy-comments@w3.org mailing list (public archive). Each Bugzilla entry and email message should contain only one comment. All comments on this specification should be made following the Description for Issues of the Working Group.
This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.
1. Introduction
1.1 Example
2. Notations and Terminology
2.1 Notational Conventions
2.2 Extensibility
2.3 XML Namespaces
2.4 Terminology
3. Policy Model
3.1 Policy Assertion
3.2 Policy Alternative
3.3 Policy
3.4 Policies of Entities in a Web Services Based System
4. Policy Expression
4.1 Normal Form Policy Expression
4.2 Policy Identification
4.3 Compact Policy Expression
4.3.1 Optional Policy Assertions
4.3.2 Policy Assertion Nesting
4.3.3 Policy Operators
4.3.4 Policy References
4.3.5 Policy Inclusion
4.3.6 Normalization
4.4 Ignorable Policy Assertions
4.5 Policy Intersection
4.6 Use of IRIs in Policy Expressions
5. Security Considerations
5.1 Information Disclosure Threats
5.2 Spoofing and Tampering Threats
5.3 Downgrade Threats
5.4 Repudiation Threats
5.5 Denial of Service Threats
5.6 General XML Considerations
6. Conformance
A. The application/wspolicy+xml Media Type
A.1 Registration
B. References
B.1 Normative References
B.2 Other References
C. Acknowledgements (Non-Normative)
D. Changes in this Version of the Document (Non-Normative)
E. Web Services Policy 1.5 - Framework Change Log (Non-Normative)
Web Services Policy 1.5 - Framework defines a framework and a model for expressing policies that refer to domain-specific capabilities, requirements, and general characteristics of entities in a Web services-based system.
A policy is a collection of policy alternatives. A policy alternative is a collection of policy assertions. A policy assertion represents a requirement, capability, or other property of a behavior. A policy expression is an XML Infoset representation of its policy, either in a normal form or in its equivalent compact form. Some policy assertions specify traditional requirements and capabilities that will manifest themselves in the messages exchanged(e.g., authentication scheme, transport protocol selection). Other policy assertions have no wire manifestation in the messages exchanged, yet are relevant to service selection and usage (e.g., privacy policy, QoS characteristics). Web Services Policy 1.5 - Framework provides a single policy language to allow both kinds of assertions to be expressed and evaluated in a consistent manner.
Web Services Policy 1.5 - Framework does not cover discovery of policy, policy scopes and subjects, or their respective attachment mechanisms. A policy attachment is a mechanism for associating policy with one or more policy scopes. A policy scope is a collection of policy subjects to which a policy applies. A policy subject is an entity (e.g., an endpoint, message, resource, interaction) with which a policy can be associated. Web Services Policy 1.5 - Attachment [[Web Services Policy Attachment]] defines such policy attachment mechanisms, especially for associating policy with arbitrary XML elements [[XML 1.0]], WSDL artifacts [[WSDL 1.1], [WSDL 2.0 Core Language]], and UDDI elements [[UDDI API 2.0], [UDDI Data Structure 2.0], [UDDI 3.0]]. Other specifications are free to define either extensions to the mechanisms defined in Web Services Policy 1.5 - Attachment [[Web Services Policy Attachment]], or additional mechanisms not covered by Web Services Policy 1.5 - Attachment [[Web Services Policy Attachment]], for purposes of associating policy with policy scopes and subjects.
Example 1-1 illustrates a security policy expression using assertions defined in WS-SecurityPolicy [[WS-SecurityPolicy]]:
Example 1-1. Use of Web Services Policy with security policy assertions.
(01) <wsp:Policy
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://www.w3.org/ns/ws-policy" >
(02) <wsp:ExactlyOne>
(03) <wsp:All>
(04) <sp:SignedParts>
(05) <sp:Body/>
(06) </sp:SignedParts>
(07) </wsp:All>
(08) <wsp:All>
(09) <sp:EncryptedParts>
(10) <sp:Body/>
(11) </sp:EncryptedParts>
(12) </wsp:All>
(13) </wsp:ExactlyOne>
(14) </wsp:Policy>
Lines (03-07) represent one policy alternative for signing a message body.
Lines (08-12) represent a second policy alternative for encrypting a message body.
Lines (02-13) illustrate the ExactlyOne
policy operator. Policy
operators group policy assertions into policy alternatives. A valid
interpretation of the policy above would be that an invocation of a Web service
will either sign or encrypt the message body.
This section specifies the notations, namespaces, and terminology used in this specification.
This specification uses the following syntax within normative outlines:
The syntax appears as an XML instance, but values in italics indicate data types instead of literal values.
Characters are appended to elements and attributes to indicate cardinality:
"?" (0 or 1)
"*" (0 or more)
"+" (1 or more)
The character "|" is used to indicate an exclusive choice between alternatives.
The characters "(" and ")" are used to indicate that contained items are to be treated as a group with respect to cardinality or choice.
This document relies on the XML Information Set [[XML Information Set]]. Information item properties are indicated by the style infoset property.
XML namespace prefixes (see Table 2-1) are used to indicate the namespace of the element or attribute being defined.
The ellipses characters "…" are used to indicate a point of extensibility that allows other Element or Attribute Information Items.
Elements and Attributes defined by this specification are referred to in the text of this document using XPath 1.0 [XPATH 1.0] expressions. Extensibility points are referred to using an extended version of this syntax:
An element extensibility point is referred to using {any} in place of the element name. This indicates that any element name can be used, from any namespace, unless specified otherwise such as in Section 4.3.3 Policy Operators.
An attribute extensibility point is referred to using @{any} in place of the attribute name. This indicates that any attribute name can be used, from any namespace.
Normative text within this specification takes precedence over normative outlines, which in turn take precedence over the XML Schema [[XML Schema Structures]] descriptions.
Within normative outlines, in this specification, ellipses (i.e., "…") indicate a point of extensibility that allows other Element or Attribute Information Items. Information Items MAY be added at the indicated extension points but MUST NOT contradict the semantics of the element information item indicated by the parent or owner property of the extension. In this context, if an Attribute Information Item is not recognized, it SHOULD be ignored. If an Element Information Item is not recognized, it MUST be treated as a policy assertion, unless specified otherwise such as in Section 4.3.4 Policy References.
This specification uses a number of namespace prefixes throughout; they are listed in Table 2-1. Note that the choice of any namespace prefix is arbitrary and not semantically significant (see [[XML Namespaces]]).
Prefix | Namespace | Specification |
---|---|---|
sp
|
http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702
| [[WS-SecurityPolicy]] |
wsam
|
http://www.w3.org/2007/05/addressing/metadata
| [[WS-Addressing Metadata]] |
wsp
|
http://www.w3.org/ns/ws-policy
| This specification |
wsu
|
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd
| [[WS-Security 2004]] |
xs
|
http://www.w3.org/2001/XMLSchema
| [[XML Schema Structures]] |
All information items defined by this specification are identified by the XML
namespace URI [[XML Namespaces]] http://www.w3.org/ns/ws-policy
. A normative XML Schema [[XML Schema Structures], [XML Schema Datatypes]] document can be
obtained indirectly by dereferencing the namespace document at the WS-Policy 1.5
namespace URI.
It is the intent of the W3C Web Services Policy Working Group that the Web Services Policy 1.5 - Framework and Web Services Policy 1.5 - Attachment XML namespace URI will not change arbitrarily with each subsequent revision of the corresponding XML Schema documents as the specifications transition through Candidate Recommendation, Proposed Recommendation and Recommendation status. However, should the specifications revert to Working Draft status, and a subsequent revision, published as a WD, CR or PR draft, results in non-backwardly compatible changes from a previously published WD, CR or PR draft of the specification, the namespace URI will be changed accordingly.
Under this policy, the following are examples of backwards compatible changes that would not result in assignment of a new XML namespace URI:
Addition of new global element, attribute, complexType and simpleType definitions.
Addition of new elements or attributes in locations covered by a previously specified wildcard.
Modifications to the pattern facet of a type definition for which the value-space of the previous definition remains valid or for which the value-space of the vast majority of instances would remain valid.
Modifications to the cardinality of elements (i.e. modifications to minOccurs or maxOccurs attribute value of an element declaration) for which the value-space of possible instance documents conformant to the previous revision of the schema would still be valid with regards to the revised cardinality rule.
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [[IETF RFC 2119]].
We introduce the following terms that are used throughout this document:
The items in a collection in this specification are unordered and may contain duplicates.
An ignorable policy assertion is an assertion that may be ignored for purposes of determining the compatibility of alternatives in policy intersection in a lax mode (as defined in 4.5 Policy Intersection).
A nested policy expression is a policy expression that is an Element Information Item in the children property of a policy assertion.
A policy is a potentially empty collection of policy alternatives.
A policy alternative is a potentially empty collection of policy assertions.
A policy assertion represents a requirement, a capability, or other property of a behavior.
A policy assertion parameter qualifies the behavior indicated by a policy assertion.
A policy assertion type represents a class of policy assertions and implies a schema for the assertion and assertion-specific semantics.
A policy attachment is a mechanism for associating policy with one or more policy scopes.
A policy expression is an XML Infoset representation of a policy, either in a normal form or in an equivalent compact form.
A policy scope is a collection of policy subjects to which a policy may apply.
A policy subject is an entity (e.g., an endpoint, message, resource, operation) with which a policy can be associated.
This section defines an abstract model for policies and for operations upon policies.
The descriptions below use XML Infoset terminology for convenience of description. However, this abstract model itself is independent of how it is represented as an XML Infoset.
[Definition: A policy assertion represents a requirement, a capability, or other property of a behavior.] A policy assertion identifies a behavior that is a requirement or capability of a policy subject. [Definition: A policy subject is an entity (e.g., an endpoint, message, resource, operation) with which a policy can be associated. ] Assertions indicate domain-specific (e.g., security, transactions) semantics and are expected to be defined in separate, domain-specific specifications.
An assertion MAY indicate that it is an ignorable policy assertion (see 4.4 Ignorable Policy Assertions). [Definition: An ignorable policy assertion is an assertion that may be ignored for purposes of determining the compatibility of alternatives in policy intersection in a lax mode (as defined in 4.5 Policy Intersection).] By default, an assertion is not ignorable for policy intersection.
Assertions are typed by the authors that define them. [Definition: A policy assertion type represents a class of policy assertions and implies a schema for the assertion and assertion-specific semantics.] The policy assertion type is identified only by the XML Infoset namespace name and local name properties (that is, the qualified name or QName) of the root Element Information Item representing the assertion. Assertions of a given type MUST be consistently interpreted independent of their policy subjects.
Authors MAY define that an assertion contains a policy expression (as defined in 4. Policy Expression) as one of its children. Nested policy expression(s) are used by authors to further qualify one or more specific aspects of the parent policy assertion. The qualification may indicate a relationship or context between the parent policy assertion and a nested policy expression. For example within a security domain, security policy authors may define an assertion describing a set of security algorithms to qualify the specific behavior of a security binding assertion. A parent policy assertion of one domain may also serve as a container for the nested policy expression from another domain.
The XML Infoset of a policy assertion MAY contain a non-empty attributes property and/or a non-empty children property. Such properties, excluding the Attribute and Element Information Items from the WS-Policy language XML namespace name are policy assertion parameters and MAY be used to parameterize the behavior indicated by the assertion. [Definition: A policy assertion parameter qualifies the behavior indicated by a policy assertion.] For example, an assertion identifying support for a specific reliable messaging mechanism might include an attribute information item to indicate how long an endpoint will wait before sending an acknowledgement.
Authors should be cognizant of the processing requirements when defining complex assertions containing policy assertion parameters or nested policy expressions. Specifically, authors are encouraged to consider when the identity of the root Element Information Item alone is enough to convey the requirement or capability.
[Definition: A policy alternative is a potentially empty collection of policy assertions.] [Definition: The items in a collection in this specification are unordered and may contain duplicates. ] An alternative with zero assertions indicates no behaviors. An alternative with one or more assertions indicates behaviors implied by those, and only those assertions.
Assertions within an alternative are not ordered, and thus aspects such as the order in which behaviors (indicated by assertions) are applied to a subject are beyond the scope of this specification. However, authors can write assertions that control the order in which behaviors are applied.
A policy alternative MAY contain multiple assertions of the same type. Mechanisms for determining the aggregate behavior indicated by the assertions (and their Post-Schema-Validation Infoset (PSVI) (See XML Schema Part 1 [[XML Schema Structures]]) content, if any) are specific to the assertion type and are outside the scope of this document. If policy assertion authors did not specify the semantics of repetition of policy assertions of a type that allows neither parameters nor nested policy expressions within a policy alternative, then repetition is simply redundancy, and multiple assertions of the assertion type within a policy alternative have the same meaning as a single assertion of the type within the policy alternative.
Note: Depending on the semantics of the domain specific policy assertions
regardless if they are qualified by nested policy expressions, a
combination of the policy assertions can be required to specify a particular
behavior. For example, a combination of two or three assertions from the
WS-SecurityPolicy [[WS-SecurityPolicy]] specification is used to indicate message-level
security for protecting messages - that is, the sp:AsymmetricBinding
assertion is used to indicate message-level security, the sp:SignedParts
assertion is used to indicate the parts of a message to be protected
and the sp:EncryptedParts
assertion is used to indicate the parts of
a message that require confidentiality.
[Definition: A policy is a potentially empty collection of policy alternatives. ] A policy with zero alternatives contains no choices; a policy with one or more alternatives indicates choice in requirements or capabilities within the policy.
Alternatives are not ordered, and thus aspects such as preferences between alternatives in a given context are beyond the scope of this specification.
Alternatives within a policy may differ significantly in terms of the behaviors they indicate. Conversely, alternatives within a policy may be very similar. In either case, the value or suitability of an alternative is generally a function of the semantics of assertions within the alternative and is therefore beyond the scope of this specification.
Applied to a Web services based system, policy is used to convey conditions on an interaction between entities (requester application, provider service, Web infrastructure component, etc). An interaction involves one or more message exchanges between two entities. It is the responsibility of assertion authors to define the interaction scope of an assertion including any constraints on the policy subjects to which the assertion may be attached and a clear specification of the message (s) within that interaction scope to which the assertion applies.
Any entity in a Web services based system may expose a policy to convey conditions under which it functions. Satisfying assertions in the policy usually results in behavior that reflects these conditions. For example, if two entities - requester and provider - expose their policies, a requester might use the policy of the provider to decide whether or not to use the service. A requester MAY choose any alternative since each is a valid configuration for interaction with the service, but a requester MUST choose only a single alternative for an interaction with a service since each represents an alternative configuration.
A policy assertion is supported by an entity in the web services based system if and only if the entity satisfies the requirement (or accommodates the capability) corresponding to the assertion. A policy alternative is supported by an entity if and only if the entity supports all the assertions in the alternative. And, a policy is supported by an entity if and only if the entity supports at least one of the alternatives in the policy. Note that although policy alternatives are meant to be mutually exclusive, it cannot be decided in general whether or not more than one alternative can be supported at the same time.
Note that an entity may be able to support a policy even if the entity does not understand the type of each assertion in the policy; the entity only has to understand the type of each assertion in a policy alternative that the entity supports. This characteristic is crucial to versioning and incremental deployment of new assertions because this allows a provider's policy to include new assertions in new alternatives while allowing entities to continue to use old alternatives in a backward-compatible manner.
This section describes how to convey policy in an interoperable form, using the XML Infoset representation of a policy. [Definition: A policy expression is an XML Infoset representation of a policy, either in a normal form or in an equivalent compact form.]
The normal form (see Section 4.1 Normal Form Policy Expression) of a policy expression is the most straightforward XML Infoset representation of the policy data model. Equivalent, alternative representations allow policy authors to compactly express a policy (see Section 4.3 Compact Policy Expression). Policy authors might be more interested in the compact form (see Section 4.3 Compact Policy Expression), where the outlines and definitions describe what is valid with regards to the policy language XML Schema.
While the policy language XML Schema is a representation of the compact form, the normal form is more restrictive as outlined in Section 4.1 Normal Form Policy Expression.
To facilitate interoperability, this specification defines a normal form for policy expressions that is a straightforward XML Infoset representation of a policy, enumerating each of its alternatives that in turn enumerate each of their assertions. The schema outline for the normal form of a policy expression is as follows:
<wsp:Policy … > <wsp:ExactlyOne> ( <wsp:All> ( <Assertion …> … </Assertion> )* </wsp:All> )* </wsp:ExactlyOne> </wsp:Policy>
The following describes the Element Information Items defined in the schema outline above:
/wsp:Policy
A policy expression.
/wsp:Policy/wsp:ExactlyOne
A collection of policy alternatives. If there are no Element Information Items in the children property, there are no admissible policy alternatives, i.e., no behavior is admissible.
/wsp:Policy/wsp:ExactlyOne/wsp:All
A policy alternative; a collection of policy assertions. If there are no Element Information Items in the children property, this is an admissible policy alternative that is empty, i.e., no behavior is specified.
/wsp:Policy/wsp:ExactlyOne/wsp:All/*
XML Infoset representation of a policy assertion.
/wsp:Policy/@{any}
Additional attributes MAY be specified but MUST NOT contradict the semantics of the owner element; if an attribute is not recognized, it SHOULD be ignored.
If an assertion in the normal form of a policy expression contains a nested policy expression, the nested policy expression MUST contain at most one policy alternative (see 4.3.2 Policy Assertion Nesting).
To simplify processing and improve interoperability, the normal form of a policy expression SHOULD be used where practical.
For example, the following is the normal form of a policy expression.
(01) <wsp:Policy
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://www.w3.org/ns/ws-policy" >
(02) <wsp:ExactlyOne>
(03) <wsp:All>
(04) <sp:SignedParts>
(05) <sp:Body/>
(06) </sp:SignedParts>
(07) </wsp:All>
(08) <wsp:All>
(09) <sp:EncryptedParts>
(10) <sp:Body/>
(11) </sp:EncryptedParts>
(12) </wsp:All>
(13) </wsp:ExactlyOne>
(14) </wsp:Policy>
Lines (03-07) and Lines (08-12) express the two alternatives in the policy. If the first alternative is selected, the message body needs to be signed [[WS-SecurityPolicy]] is supported; conversely, if the second alternative is selected, the message body needs to be encrypted.
A policy expression MAY be associated with an IRI [[IETF RFC 3987]]. The schema outline for attributes to associate an IRI is as follows:
<wsp:Policy ( Name="xs:anyURI" )? ( wsu:Id="xs:ID" | xml:id="xs:ID" )? … > … </wsp:Policy>
The following describes the Attribute Information Items listed and defined in the schema outline above:
/wsp:Policy/@Name
The identity of the policy expression as an absolute IRI [[IETF RFC 3987]]. If omitted, there is no implied value. This IRI MAY be used to refer to a policy from other XML documents using a policy attachment mechanism such as those defined in WS-PolicyAttachment [[Web Services Policy Attachment]]. [Definition: A policy attachment is a mechanism for associating policy with one or more policy scopes.] [Definition: A policy scope is a collection of policy subjects to which a policy may apply.]
/wsp:Policy/(@wsu:Id | @xml:id)
The identity of the policy expression as an ID
within
the enclosing XML document. If omitted, there is no implied value.
The constraints of the XML 1.0 [[XML 1.0]] ID type MUST
be met. To refer to this policy expression, an IRI-reference
MAY be formed using this value per Section
4.2 of WS-Security [[WS-Security 2004]] when @wsu:Id is
used.
Note:
The use of xml:id
attribute in conjunction with
Canonical XML 1.0 is inappropriate as described in Appendix C of
xml:id Version 1.0 [[XML ID]] and thus this combination
must be avoided (see [[C14N 1.0 Note]]). For example, a
policy expression identified using xml:id
attribute
should not be signed using XML Digital Signature when Canonical XML
1.0 is being used as the canonicalization method.
Note:
Canonical XML 1.1 [[XMLID11]] is intended to
address the issues that occur with Canonical XML 1.0 with regards to
xml:id
. The W3C XML Security Specifications Maintenance WG has
been chartered to address how to integrate Canonical XML 1.1 with XML
Security, including XML Signature [[SecSpecMaintWG]]
(See http://www.w3.org/2007/xmlsec/.)
The following example illustrates how to associate a policy expression with the
absolute IRI "http://www.example.com/policies/P1"
:
(01) <wsp:Policy Name="http://www.example.com/policies/P1" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <!-- Details omitted for readability --> (03) </wsp:Policy>
The following example illustrates how to associate a policy expression with the
IRI-reference "#P1"
:
(01) <wsp:Policy wsu:Id="P1" xmlns:wsp="http://www.w3.org/ns/ws-policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" > (02) <!-- Details omitted for readability --> (03) </wsp:Policy>
To express a policy in a more compact form while still using the XML Infoset, this specification defines three constructs: an attribute to decorate an assertion, semantics for recursively nested policy operators, and a policy reference/inclusion mechanism. Each sub section below describes a construct and its equivalent normal form. To interpret a compact expression in an interoperable form, a policy expression in the compact form can be converted (see Section 4.3.6 Normalization) to the normal form (see Section 4.1 Normal Form Policy Expression).
A policy expression consists of a
wsp:Policy
wrapper element and zero or more child and descendent
elements.
To indicate that a policy assertion is optional, this specification defines an attribute that is a compact authoring style for expressing a pair of alternatives, one with and one without that assertion. The schema outline for this attribute is as follows:
<Assertion ( wsp:Optional="xs:boolean" )? …> … </Assertion>
The following describes the Attribute Information Item defined in the schema outline above:
/Assertion/@wsp:Optional
If the actual value (See XML Schema Part 1 [[XML Schema Structures]]) is true, the expression of the assertion is semantically equivalent to the following:
<wsp:ExactlyOne> <wsp:All> <Assertion …> … </Assertion> </wsp:All> <wsp:All /> </wsp:ExactlyOne>
If the actual value (See XML Schema Part 1 [[XML Schema Structures]]) is false, the expression of the assertion is semantically equivalent to the following:
<wsp:ExactlyOne> <wsp:All> <Assertion …> … </Assertion> </wsp:All> </wsp:ExactlyOne>
Omitting this attribute is semantically equivalent to including it with a value of false. Policy expressions should not include this attribute with a value of false, but policy parsers must accept this attribute with a value of false.
For example, the following compact policy expression:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <sp:IncludeTimestamp wsp:Optional="true" /> (03) </wsp:Policy>
is equivalent to the following normal form policy expression:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:ExactlyOne> (03) <wsp:All> (04) <sp:IncludeTimestamp /> (05) </wsp:All> (06) <wsp:All /> (07) </wsp:ExactlyOne> (08) </wsp:Policy>
The @wsp:Optional
attribute in Line (02) of the first policy
expression indicates that the assertion in Line (02) is to be included in a
policy alternative whilst excluded from another; it is included in Lines
(03-05) and excluded in Line (06). Note that @wsp:Optional
does
not appear in the normal form of a policy expression.
Any policy assertion MAY contain a policy expression. [Definition: A nested policy expression is a policy expression that is an Element Information Item in the children property of a policy assertion.] The schema outline for a nested policy expression is:
<Assertion …> … ( <wsp:Policy …> … </wsp:Policy> )? … </Assertion>
The following describes additional processing constraints on the outline listed above:
/Assertion/wsp:Policy
This indicates that the assertion contains a nested policy
expression. If there is no wsp:Policy
Element
Information Item in the children property, the assertion has no nested policy
expression.
If the schema outline for an assertion type requires a nested
policy expression but the assertion does not further qualify one
or more aspects of the behavior indicated by the assertion type
(i.e., no assertions are needed in the nested policy
expression), the assertion MUST include an
empty <wsp:Policy/>
Element
Information Item in its children property. As explained in Section 4.3.3 Policy Operators, this is equivalent to a nested
policy expression with a single alternative that has zero
assertions.
Note: This specification does not define processing for arbitrary
wsp:Policy
Element Information Items in the
descendants of an assertion parameter, e.g., in the children property of one of
the children as in:
(01)<wsp:Policy> (02) <Lorem> (03) <Ipsum> (04) <wsp:Policy> (05) … (06) </wsp:Policy> (07) </Ipsum> (08) </Lorem> (09)</wsp:Policy>
Policy assertions containing a nested policy expression are normalized
recursively. The nesting of a policy expression (and a wsp:Policy
child) is retained in the normal form, but in the normal form, each nested
policy expression contains at most one policy alternative. If an assertion A
contains a nested policy expression E, and if E contains more than one
policy alternative, A is duplicated such that there are as many instances of
A as choices in E, and the nested policy expression of a duplicate A
contains a single choice. This process is applied recursively to the
assertions within those choices and to their nested policy expression, if
any. Intuitively, if a compact policy is thought of as a tree whose branches
have branches etc, in the normal form, a policy is a stump with straight
vines.
For example, consider the following policy expression with nested policy expressions in a compact form:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <sp:TransportBinding> (03) <wsp:Policy> (04) <sp:AlgorithmSuite> (05) <wsp:Policy> (06) <wsp:ExactlyOne> (07) <sp:Basic256Rsa15 /> (08) <sp:TripleDesRsa15 /> (09) </wsp:ExactlyOne> (10) </wsp:Policy> (11) </sp:AlgorithmSuite> (12) <sp:TransportToken> (13) <wsp:Policy> <sp:HttpsToken> <wsp:Policy/> </sp:HttpsToken> (15) </wsp:Policy> (16) </sp:TransportToken> <!-- Details omitted for readability --> (17) </wsp:Policy> (18) </sp:TransportBinding> (19) </wsp:Policy>
Lines (02-18) in this policy expression contain a single transport binding security policy assertion; within its nested policy expression (Lines 03-17), is an algorithm suite assertion (Lines 04-11) whose nested policy expression (Lines 05-10) contains two policy alternatives (Lines 07-08). Generally, a nested policy expression implies recursive processing; in the example above, the behavior indicated by the transport binding assertion requires the behavior indicated by one of the assertions within the algorithm suite assertion.
The example above is equivalent to the following:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:ExactlyOne> (03) <wsp:All> (04) <sp:TransportBinding> (05) <wsp:Policy> (06) <sp:AlgorithmSuite> (07) <wsp:Policy> (08) <sp:Basic256Rsa15 /> (09) </wsp:Policy> (10) </sp:AlgorithmSuite> (11) <sp:TransportToken> (12) <wsp:Policy> <sp:HttpsToken> <wsp:Policy/> </sp:HttpsToken> (14) </wsp:Policy> (15) </sp:TransportToken> <!-- Details omitted for readability --> (16) </wsp:Policy> (17) </sp:TransportBinding> (18) </wsp:All> (19) <wsp:All> (20) <sp:TransportBinding> (21) <wsp:Policy> (22) <sp:AlgorithmSuite> (23) <wsp:Policy> (24) <sp:TripleDesRsa15 /> (25) </wsp:Policy> (26) </sp:AlgorithmSuite> (27) <sp:TransportToken> (28) <wsp:Policy> <sp:HttpsToken> <wsp:Policy/> </sp:HttpsToken> (30) </wsp:Policy> (31) </sp:TransportToken> <!-- Details omitted for readability --> (32) </wsp:Policy> (33) </sp:TransportBinding> (34) </wsp:All> (35) </wsp:ExactlyOne> (36) </wsp:Policy>
In the listing above, the transport binding and its nested policy expression have been duplicated once for each of the nested alternatives in Lines (07-08) of the compact policy. The first alternative (Lines 03-18) contains a single nested algorithm suite alternative (Line 08) as does the second alternative (Lines 19-34 and 24).
Policies are used to convey a set of
capabilities, requirements, and general characteristics of entities (see
1. Introduction). These are generally expressible as a set of
policy alternatives. Policy
operators (wsp:Policy
, wsp:All
and wsp:ExactlyOne
elements) are used to group policy
assertions into policy
alternatives. To compactly express complex policies, policy
operators MAY be recursively nested; that is, one or more
instances of wsp:Policy
, wsp:All
, and/or
wsp:ExactlyOne
MAY be nested within wsp:Policy
,
wsp:All
, and/or wsp:ExactlyOne
.
The schema outline for the wsp:Policy
element in the compact form is
as follows:
<wsp:Policy … > ( <wsp:Policy …>…</wsp:Policy> | <wsp:ExactlyOne>…</wsp:ExactlyOne> | <wsp:All>…</wsp:All> | <wsp:PolicyReference … >…</wsp:PolicyReference> | … )* </wsp:Policy>
The following describes the Attribute and Element Information Items defined in the schema outline above:
/wsp:Policy
This element is the wsp:Policy
operator.
/wsp:Policy/wsp:Policy
This element is a nested wsp:Policy
operator.
/wsp:Policy/wsp:ExactlyOne
This element is a nested wsp:ExactlyOne
operator.
/wsp:Policy/wsp:All
This element is a nested wsp:All
operator.
/wsp:Policy/wsp:PolicyReference
This element references a policy expression to be included per Section 4.3.5 Policy Inclusion.
/wsp:Policy/@{any}
Additional attributes MAY be specified but MUST NOT contradict the semantics of the owner element; if an attribute is not recognized, it SHOULD be ignored.
/wsp:Policy/{any}
Additional elements MAY be specified. Such elements MUST NOT use the Web Services Policy language XML namespace name and MUST NOT contradict the semantics of the parent element.
The schema outline for the wsp:ExactlyOne
element in the compact
form is as follows:
<wsp:ExactlyOne> ( <wsp:Policy … >…</wsp:Policy> | <wsp:ExactlyOne>…</wsp:ExactlyOne> | <wsp:All>…</wsp:All> | <wsp:PolicyReference … >…</wsp:PolicyReference> | … )* </wsp:ExactlyOne>
The following describes the Attribute and Element Information Items defined in the schema outline above:
/wsp:ExactlyOne
This element is the wsp:ExactlyOne
operator.
/wsp:ExactlyOne/wsp:Policy
This element is a nested wsp:Policy
operator.
/wsp:ExactlyOne/wsp:ExactlyOne
This element is a nested wsp:ExactlyOne
operator.
/wsp:ExactlyOne/wsp:All
This element is a nested wsp:All operator
.
/wsp:ExactlyOne/wsp:PolicyReference
This element references a policy expression to be included per Section 4.3.5 Policy Inclusion.
/wsp:ExactlyOne/{any}
Additional elements MAY be specified. Such elements MUST NOT use the Web Services Policy language XML namespace name and MUST NOT contradict the semantics of the parent element.
The schema outline for the wsp:All
element in the compact form is as
follows:
<wsp:All> ( <wsp:Policy … >…</wsp:Policy> | <wsp:ExactlyOne>…</wsp:ExactlyOne> | <wsp:All>…</wsp:All> | <wsp:PolicyReference … >…</wsp:PolicyReference> | … )* </wsp:All>
The following describes the Attribute and Element Information Items defined in the schema outline above:
/wsp:All
This element is the wsp:All
operator.
/wsp:All/wsp:Policy
This element is a nested wsp:Policy
operator.
/wsp:All/wsp:ExactlyOne
This element is a nested wsp:ExactlyOne
operator.
/wsp:All/wsp:All
This element is a nested wsp:All
operator.
/wsp:All/wsp:PolicyReference
This element references a policy expression to be included per Section 4.3.5 Policy Inclusion.
/wsp:All/{any}
Additional elements MAY be specified. Such elements MUST NOT use the Web Services Policy language XML namespace name and MUST NOT contradict the semantics of the parent element.
Note:
The wsp:All
and wsp:ExactlyOne
elements do not allow
attribute extensibility because such attributes cannot be preserved
through normalization.
The following rules are used to transform a compact policy expression into a normal form policy expression:
Use of wsp:Policy
as an operator within a policy
expression is equivalent to wsp:All
.
A collection of assertions in an wsp:All
operator is
equivalent to a policy
alternative. For instance,
<wsp:All> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:All>
is equivalent to:
<wsp:ExactlyOne> <wsp:All> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:All> </wsp:ExactlyOne>
<wsp:All />
expresses a policy alternative
with zero policy assertions. Note that since
wsp:Policy
is equivalent to
wsp:All
, <wsp:Policy
/>
is therefore equivalent to
<wsp:All />
, i.e., a
policy alternative with zero assertions.
<wsp:ExactlyOne />
expresses a
policy with zero policy alternatives.
In line with the previous statements that policy assertions
within a policy alternative and policy alternatives within a
policy are not ordered (see 3.2 Policy Alternative
and 3.3 Policy, respectively), wsp:All
and wsp:ExactlyOne
are commutative. For example,
<wsp:All> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:All>
is equivalent to:
<wsp:All> <!-- assertion 2 --> <!-- assertion 1 --> </wsp:All>
and:
<wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne>
is equivalent to:
<wsp:ExactlyOne> <!-- assertion 2 --> <!-- assertion 1 --> </wsp:ExactlyOne>
wsp:All
and wsp:ExactlyOne
are associative. For
example,
<wsp:All> <!-- assertion 1 --> <wsp:All> <!-- assertion 2 --> </wsp:All> </wsp:All>
is equivalent to:
<wsp:All> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:All>
and:
<wsp:ExactlyOne> <!-- assertion 1 --> <wsp:ExactlyOne> <!-- assertion 2 --> </wsp:ExactlyOne> </wsp:ExactlyOne>
is equivalent to:
<wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne>
wsp:All
and wsp:ExactlyOne
are idempotent. For
example,
<wsp:All> <wsp:All> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:All> </wsp:All>
is equivalent to:
<wsp:All> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:All>
and:
<wsp:ExactlyOne> <wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne> </wsp:ExactlyOne>
is equivalent to:
<wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne>
wsp:All
is distributivedistributes over wsp:ExactlyOne
. That is, a wsp:All
element containing only wsp:ExactlyOne
child elements is equivalent to a wsp:ExactlyOne
element containing, for each possible combination of one child element from each of the wsp:ExactlyOne
element over which being distributed, a wsp:All
element containing that combination. For
example,
<wsp:All> <wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne> </wsp:All>
is equivalent to:
<wsp:ExactlyOne> <wsp:All> <!-- assertion 1 --> </wsp:All> <wsp:All> <!-- assertion 2 --> </wsp:All> </wsp:ExactlyOne>
Similarly by repeatedly distributing wsp:All over wsp:ExactlyOne,
<wsp:All> <wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne> <wsp:ExactlyOne> <!-- assertion 3 --> <!-- assertion 4 --> </wsp:ExactlyOne> </wsp:All>
is equivalent to:
<wsp:ExactlyOne> <wsp:All><!-- assertion 1 --><!-- assertion 3 --></wsp:All> <wsp:All><!-- assertion 1 --><!-- assertion 4 --></wsp:All> <wsp:All><!-- assertion 2 --><!-- assertion 3 --></wsp:All> <wsp:All><!-- assertion 2 --><!-- assertion 4 --></wsp:All> </wsp:ExactlyOne>
Distributing wsp:All
over an empty
wsp:ExactlyOne
is equivalent to no alternatives. For
example,
<wsp:All> <wsp:ExactlyOne /> </wsp:All>
is equivalent to:
<wsp:ExactlyOne />
and:
<wsp:All> <wsp:ExactlyOne> <!-- assertion 1 --> <!-- assertion 2 --> </wsp:ExactlyOne> <wsp:ExactlyOne /> </wsp:All>
is equivalent to:
<wsp:ExactlyOne />
For example, given the following compact policy expression:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <sp:RequireDerivedKeys wsp:Optional="true" /> (03) <wsp:ExactlyOne> (04) <sp:WssUsernameToken10 /> (05) <sp:WssUsernameToken11 /> (06) </wsp:ExactlyOne> (07) </wsp:Policy>
Applying Section 4.3.1 Optional Policy Assertions to
@wsp:Optional
in Line (02), and distributing wsp:All
over wsp:ExactlyOne
per Section 4.3.3 Policy Operators
for the assertions in Lines (04-05) yields:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:ExactlyOne> (03) <wsp:All> <!-- @wsp:Optional alternative with assertion --> (04) <sp:RequireDerivedKeys /> (05) </wsp:All> (06) <wsp:All /> <!-- @wsp:Optional alternative without --> (07) </wsp:ExactlyOne> (08) <wsp:ExactlyOne> (09) <wsp:All> (10) <sp:WssUsernameToken10 /> (11) </wsp:All> (12) <wsp:All> (13) <sp:WssUsernameToken11 /> (14) </wsp:All> (15) </wsp:ExactlyOne> (16) </wsp:Policy>
Note that the assertion listed in Line (02) in the first listing expands into the two alternatives in Lines (03-06) in the second listing.
Finally, noting that wsp:Policy
is equivalent to wsp:All
,
and distributing wsp:All
over wsp:ExactlyOne
yields the
following normal form policy expression:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:ExactlyOne> (03) <wsp:All> (04) <sp:RequireDerivedKeys /> (05) <sp:WssUsernameToken10 /> (06) </wsp:All> (07) <wsp:All> (08) <sp:RequireDerivedKeys /> (09) <sp:WssUsernameToken11 /> (10) </wsp:All> (11) <wsp:All> (12) <sp:WssUsernameToken10 /> (13) </wsp:All> (14) <wsp:All> (15) <sp:WssUsernameToken11 /> (16) </wsp:All> (17) </wsp:ExactlyOne> (18) </wsp:Policy>
Note that the two alternatives listed in Lines (03-06) in the second listing are combined with the two alternatives listed in Lines (09-14) in the second listing to create four alternatives in the normalized policy, Lines (03-06), (07-10), (11-13), and (14-16).
Consider another example, given the following compact policy expression:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <sp:RequireDerivedKeys /> (03) <wsp:ExactlyOne> (04) <sp:WssUsernameToken10 /> (05) <sp:WssUsernameToken11 /> (06) </wsp:ExactlyOne> (07) </wsp:Policy>
Applying Section 4.3.1 Optional Policy Assertions to @wsp:Optional="false"
in Line (02), and distributing wsp:All over wsp:ExactlyOne per Section 4.3.3 Policy Operators for the assertions in Lines (04-05) yields:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:ExactlyOne> (03) <wsp:All> (04) <sp:RequireDerivedKeys /> (05) </wsp:All> (06) </wsp:ExactlyOne> (07) <wsp:ExactlyOne> (08) <wsp:All> (09) <sp:WssUsernameToken10 /> (10) </wsp:All> (11) <wsp:All> (12) <sp:WssUsernameToken11 /> (13) </wsp:All> (14) </wsp:ExactlyOne> (15) </wsp:Policy>
Note that the assertion listed in Line (02) in the first listing expands into an alternative in Lines (03-05) in the second listing.
Finally, noting that wsp:Policy
is equivalent to wsp:All
, and distributing wsp:All
over wsp:ExactlyOne
yields the following normal form policy expression:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:ExactlyOne> (03) <wsp:All> (04) <sp:RequireDerivedKeys /> (05) <sp:WssUsernameToken10 /> (06) </wsp:All> (07) <wsp:All> (08) <sp:RequireDerivedKeys /> (09) <sp:WssUsernameToken11 /> (10) </wsp:All> (11) </wsp:ExactlyOne> (12) </wsp:Policy>
Note that the first alternative listed in Lines (03-05) in the second listing is combined with the two alternatives listed in Lines (08-13) in the second listing to create two alternatives in the normalized policy, Lines (03-06) and (07-10).
The wsp:PolicyReference
element is used to reference policy expressions. The semantics of
the wsp:PolicyReference
element are determined by the context in
which it is used (for an example, see 4.3.5 Policy Inclusion).
The schema outline for the wsp:PolicyReference
element is as
follows:
<wsp:PolicyReference URI="xs:anyURI" ( Digest="xs:base64Binary" ( DigestAlgorithm="xs:anyURI" )? )? … > … </wsp:PolicyReference>
The following describes the Attribute and Element Information Items defined in the schema outline above:
/wsp:PolicyReference
This element references a policy expression that is being referenced.
/wsp:PolicyReference/@URI
This attribute references a policy expression by an IRI. For a
policy expression within the same XML Document, the reference
SHOULD be an IRI-reference to a policy
expression identified by an ID
. For an external
policy expression, there is no requirement that the IRI be
resolvable; retrieval mechanisms are beyond the scope of this
specification. After retrieval, there is no requirement to check
that the retrieved policy expression is associated (Section
4.2 Policy Identification) with this IRI. The
IRI included in the retrieved policy expression, if any,
MAY be different than the IRI used to
retrieve the policy expression.
/wsp:PolicyReference/@Digest
This attribute is of type xs:base64Binary
and
specifies the digest of the referenced policy expression. This
is used to ensure the included policy is the expected policy. If
omitted, there is no implied value.
/wsp:PolicyReference/@DigestAlgorithm
This optional URI attribute specifies the digest algorithms being used. This specification predefines the default algorithm below, although additional algorithms can be expressed.
URI | Description |
---|---|
http://www.w3.org/ns/ws-policy/Sha1Exc (implied) | The digest is a SHA1 hash over the octet stream resulting from using the Exclusive XML canonicalization defined for XML Signature [[XML-Signature]]. |
/wsp:PolicyReference/@{any}
Additional attributes MAY be specified but MUST NOT contradict the semantics of the owner element; if an attribute is not recognized, it SHOULD be ignored.
/wsp:PolicyReference/{any}
Additional elements MAY be specified but MUST NOT contradict the semantics of the parent element; if an element is not recognized, it SHOULD be ignored.
In order to share assertions across
policy expressions, the
wsp:PolicyReference
element MAY be present
anywhere a policy assertion is allowed inside a policy expression. This
element is used to include the content of one policy expression in another
policy expression.
When a wsp:PolicyReference
element references a wsp:Policy
element, then the semantics of inclusion are simply to replace the
wsp:PolicyReference
element with a wsp:All
element
whose children property is the same as
the children property of the referenced
wsp:Policy
element. That is, the contents of the referenced
policy conceptually replace the wsp:PolicyReference
element and are
wrapped in a wsp:All
operator. Using the
wsp:PolicyReference
element, a policy expression MUST
NOT reference itself either directly or indirectly. (Note:
References that have a @Digest
attribute
SHOULD be validated before being included.)
In the example below two policies include and extend a common policy. In the first example there is a single policy document containing two policy assertions. The expression is given an identifier but not a fully qualified location. The second and third expressions reference the first expression by URI indicating the referenced expression is within the document.
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="Protection" > (02) <sp:EncryptSignature wsp:Optional="true" /> (03) <sp:ProtectTokens wsp:Optional="true" /> (04) </wsp:Policy>
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <wsp:PolicyReference URI="#Protection" /> (03) <sp:OnlySignEntireHeadersAndBody /> (04) </wsp:Policy>
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > (02) <sp:IncludeTimestamp /> (03) <wsp:PolicyReference URI="#Protection" /> (04) <sp:OnlySignEntireHeadersAndBody /> (05) </wsp:Policy>
There are times when it is desirable to "re-use" a portion of a policy expression. Generally, this can be accomplished by placing the common assertions in a separate policy expression and referencing it.
To interpret a compact expression in an interoperable form, a compact expression may be converted to the corresponding normal form expression by the following procedure:
Start with the Element Information Item E (as defined in the XML
Information Set [[XML Information Set]]) of the policy
expression. The namespace name
of E is always "http://www.w3.org/ns/ws-policy"
. In the base case, the
local name property of E is
"Policy"
; in the recursive case, the local name property of E is
"Policy"
, "ExactlyOne"
, or
"All"
.
Expand Element Information Items (as defined in the XML Information Set [[XML Information Set]]) in the children property of E that are policy references per Section 4.3.5 Policy Inclusion.
Convert each Element Information Item C in the children property of E into normal form.
If the namespace name
property of C is "http://www.w3.org/ns/ws-policy"
and the local name property of C
is "Policy"
, "ExactlyOne"
, or
"All"
, C is an expression of a policy
operator; normalize C by recursively applying this
procedure.
Otherwise the Element Information Item C is an assertion; normalize C per Sections 4.3.1 Optional Policy Assertions and 4.3.2 Policy Assertion Nesting.
Apply the policy operator indicated by E to the normalized Element Information Items in its children property and construct a normal form per Section 4.3.3 Policy Operators and 4.1 Normal Form Policy Expression.
Note that an implementation may use a more efficient procedure and is not required to explicitly convert a compact expression into the normal form as long as the processing results are indistinguishable from doing so.
The wsp:Ignorable
attribute indicates if a policy assertion is an
ignorable policy
assertion. The behavior implied by an ignorable assertion
is expected to be a behavior that need not be engaged for successful
interoperation with the entity that includes such ignorable assertions
in its policy.
The schema outline for the wsp:Ignorable
this attribute is as follows:
<Assertion ( wsp:Ignorable="xs:boolean" )? … > … </Assertion>
The following describes the Attribute Information Item defined in the schema outline above:
/Assertion/@wsp:Ignorable
This attribute is of type xs:boolean
. If the actual
value (See XML Schema Part 1 [[XML Schema Structures]]) is
true, the assertion is an ignorable policy assertion. If the actual value is
false, the assertion is not an ignorable policy
assertion. Omitting this attribute is semantically
equivalent to including it with a value of false.
Policy intersection is OPTIONAL but, a useful tool when two or more parties express policy and want to limit the policy alternatives to those that are mutually compatible. For example, when a requester and a provider express requirements on a message exchange, intersection identifies compatible policy alternatives (if any) included in both requester and provider policies. Policy Intersection is a commutative operation performed on two policies that yields a policy that contains a collection of the compatible policy alternatives. (Note: while policy intersection at times is analogous with set intersection, it does not imply formal set intersection semantics). There are two modes for intersection: strict and lax. How the mode is selected or indicated for the policy intersection is outside the scope of this specification.
AsBecause a first approximation, an intersection algorithm is defined below that approximates compatibility of policy assertions inalternative a domain-independent manner. Mechanisms for determining assertion parameter compatibility are not partsemantics of the this domain-independent policyassertions, intersection. Determiningdetermining whether two policy assertions of the same typealternatives are compatible may involve domain-specific processing for purposes of determining assertion parameter compatibility. Domain-independent policy intersection may be extended toinclude domain-specific processing. If a domain-specific intersection processing algorithm is required this will be known from the QName of the specific assertion type involved in the policy alternative. However,alternatives. regardless of whether an assertion's QName indicates domain-specificapproximation, processing, an implementation ofis defined the domain-independentherein intersection need not apply the domain-specific processing.
Thedomain-independent policy intersection algorithmmanner: is:
Two policy assertions are compatible if they have the same type and
If either assertion contains a nested policy expression, the two assertions are compatible if they both have a nested policy expression and the alternative in the nested policy expression of one is compatible with the alternative in the nested policy expression of the other.
Assertion parameters are not part of the domain-independent compatibility determination defined herein but this domain-independent policy intersection may be extended to include domain-specific processing for purposesprocessing. of determining Assertion parameter compatibility.
If the mode is strict, two policy alternatives A and B are compatible:
if each assertion in A is compatible with an assertion in B, and
if each assertion in B is compatible with an assertion in A.
If the mode is lax, two policy alternatives A and B are compatible:
if each assertion in A that is not an ignorable policy assertion is compatible with an assertion in B, and
if each assertion in B that is not an ignorable policy assertion is compatible with an assertion in A.
If two alternatives are compatible, their intersection is an alternative
containing all of the occurrences of all of the assertions from botheach of the
alternatives (i.e., the bag union of the two), regardless of whether
or not they are marked with the wsp:Ignorable='true'
attribute.two).
Two policies are compatible if an alternative in one is compatible with an alternative in the other. If two policies are compatible, their intersection is the set of the intersections between all pairs of compatible alternatives, choosing one alternative from each policy. If two policies are not compatible, their intersection has no policy alternatives.
The result of policy intersection can be zero or more alternatives. Each alternative may contain more than one assertion of the same type which may come from different input policies. See Section 3.2 Policy Alternative for mechanisms for determining the aggregate behavior indicated by multiple assertions of the same policy assertion type. If policy assertion authors did not specify the semantics of multiple assertions of the same assertion type within a policy alternative and the type and its descendant assertion types (within a nested policy expression outline, if any) do not allow any parameters, then multiple assertions of the type within a policy alternative in the intersection result have the same meaning as a single assertion of the type within the policy alternative.
An entity applies all the behaviors implied by a policy alternative when that policy alternative is chosen from the intersection result (see 3.4 Policies of Entities in a Web Services Based System). If an entity includes a policy assertion type A in its policy, and this policy assertion type A does not occur in an intersected result, then that entity SHOULD not apply the behavior implied by assertion type A. If a policy assertion type Z is not included in the input policies being intersected then the intersection result is silent about the behavior implied by the assertion type Z.
As an example of intersection, consider two input policies in normal form:
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > <!-- Policy P1 --> (02) <wsp:ExactlyOne> (03) <wsp:All> <!-- Alternative A1 --> (04) <sp:SignedElements> (05) <sp:XPath>/S:Envelope/S:Body</sp:XPath> (06) </sp:SignedElements> (07) <sp:EncryptedElements> (08) <sp:XPath>/S:Envelope/S:Body</sp:XPath> (09) </sp:EncryptedElements> (10) </wsp:All> (11) <wsp:All> <!-- Alternative A2 --> (12) <sp:SignedParts> (13) <sp:Body /> (14) <sp:Header Namespace="http://www.w3.org/2005/08/addressing" /> (15) </sp:SignedParts> (16) <sp:EncryptedParts> (17) <sp:Body /> (18) </sp:EncryptedParts> (19) </wsp:All> (20) </wsp:ExactlyOne> (21) </wsp:Policy>
The listing above contains two policy alternatives. The first alternative, (Lines
03-10) contains two policy assertions. One indicates which elements should be
signed (Lines 04-06); its type is sp:SignedElements
(Line 04), and its
parameters include an XPath expression for the content to be signed (Line 05).
The other assertion (Lines 07-09) has a similar structure: type (Line 07) and
parameters (Line 08).
The second alternative (Lines 11-19) also contains two assertions, each with type (Line 12 and Line 16) and parameters (Lines 13-14 and Line 17).
As this example illustrates, compatibility between two policy assertions is based on assertion type and delegates parameter processing to domain-specific processing.
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > <!-- Policy P2 --> (02) <wsp:ExactlyOne> (03) <wsp:All> <!-- Alternative A3 --> (04) <sp:SignedParts /> (05) <sp:EncryptedParts> (06) <sp:Body /> (07) </sp:EncryptedParts> (08) </wsp:All> (09) <wsp:All> <!-- Alternative A4 --> (10) <sp:SignedElements> (11) <sp:XPath>/S:Envelope/S:Body</sp:XPath> (12) </sp:SignedElements> (13) </wsp:All> (14) </wsp:ExactlyOne> (15) </wsp:Policy>
Because there is only one alternative (A2) in policy P1 with the same assertion type as another alternative (A3) in policy P2, the intersection is a policy with a single alternative that contains all of the assertions in A2 and in A3.
(01) <wsp:Policy xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702" xmlns:wsp="http://www.w3.org/ns/ws-policy" > <!-- Intersection of P1 and P2 --> (02) <wsp:ExactlyOne> (03) <wsp:All> (04) <sp:SignedParts > (05) <sp:Body /> (06) <sp:Header Namespace="http://www.w3.org/2005/08/addressing" /> (07) </sp:SignedParts> (08) <sp:EncryptedParts> (09) <sp:Body /> (10) </sp:EncryptedParts> (11) <sp:SignedParts /> (12) <sp:EncryptedParts> (13) <sp:Body /> (14) </sp:EncryptedParts> (15) </wsp:All> (16) </wsp:ExactlyOne> (17) </wsp:Policy>
Note that there are two> 1 assertions
of the type sp:SignedParts
;
when and two
assertionsbehavior of the
typewith sp:EncryptedParts
, one
from eachis of the
contents input Policies.both In general,
whetherare two assertionsto of the
same typebehavior. are
compatible or repetition is redundancy depends on the domain-specific
semantics of the assertionsp:SignedParts type.
Asassertion. mentioned above, if theassertion
authors assertions
haveare no parametersto and the
assertions
in nestedsuch policiy expressions
have no parameters, thentwo multiple
assertions of
the type
within a policy alternative
in the intersection result have the same meaning
as a single
assertion
of the type within
the policy alternative.
Based on the semantics of multiple
assertions of the
EncryptedParts assertion
type, as specified in the WS-SecurityPolicy
[[WS-SecurityPolicy]] specification, one of the
sp:EncryptedParts
assertion
in the above example is redundant.
Whether the two sp:SignedParts
assertions are compatible
oralways one of them isleast redundant depends on the semantics defined for
this assertion type.compatible.
As another example of intersection of WS-Addressing assertions that utilize the framework intersection algorithm, consider two input policies:
<wsp:Policy xmlns:wsp="http://www.w3.org/ns/ws-policy" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata" > <wsp:ExactlyOne> <wsp:All> <!-- Alternative A5 --> <wsam:Addressing> <wsp:Policy/> </wsam:Addressing> </wsp:All> </wsp:ExactlyOne> </wsp:Policy>
Lines (04)-(06) in the above policy expression contain an addressing
policy assertion with the empty <wsp:Policy/>
in line (05).
The empty <wsp:Policy/>
is a nested policy expression with an
alternative that has zero assertions. In the example above, the addressing
assertion indicates the use of addressing without any restriction.
<wsp:Policy xmlns:wsp="http://www.w3.org/ns/ws-policy" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata" > <wsp:ExactlyOne> <wsp:All> <!-- Alternative A6 --> <wsam:Addressing> <wsp:Policy> <wsam:AnonymousResponses/> </wsp:Policy> </wsam:Addressing> </wsp:All> </wsp:ExactlyOne> </wsp:Policy>
Lines (04)-(08) in the above policy expression contain an addressing
policy assertion with a nested policy expression in lines (05)-(06).
The nested policy expression indicates that the provider requires request
messages to use response endpoint EPRs that contain the anonymous URI.
The nested policy expression contains an alternative that has one
assertion, wsam:AnonymousResponses
.
The two assertions in alternatives A5 and A6 have the same assertion type and have nested policy expressions. The nested policy expression within the addressing assertion in the alternative A5 contains an alternative that has zero assertions. The nested policy expression within the addressing assertion in the alternative A6 contains an alternative that has one assertion. The nested policy expressions within these two assertions are incompatible because the alternative in one is incompatible with the alternative in the other.
Therefore, the two assertions are incompatible and hence the two alternatives are incompatible.
Policy expressions use IRIs for some identifiers. This document does not define a base URI but relies on the mechanisms defined in XML Base [[XML BASE]] and RFCs 3023 [[IETF RFC 3023]], 3986 [[IETF RFC 3986]] and 3987 [[IETF RFC 3987]] for establishing a base URI against which relative IRIs can be made absolute.
It is RECOMMENDED that policies and assertions be integrity protected to permit the detection of tampering. This can be done using a technology such as XML DSig [[XML-Signature]], SSL/TLS [[IETF RFC 2246]], or WS-Security 2004 [[WS-Security 2004]].
Policies SHOULD NOT be accepted unless they are signed and have an associated security token to specify the signer has the right to "speak for" the scope containing the policy. That is, a relying party shouldn't rely on a policy unless the policy is signed and presented with sufficient credentials to pass the relying parties' acceptance criteria.
It should be noted that the mechanisms described in this document could be secured as part of a SOAP message [[SOAP 1.1], [SOAP 1.2 Messaging Framework]] using WS-Security [[WS-Security 2004]] or embedded within other objects using object-specific security mechanisms.
This section describes the security considerations that service providers, requestors, policy authors, policy assertion authors, and policy implementers need to consider when exposing, consuming and designing policy expressions, authoring policy assertions or implementing policy.
A policy is used to represent the capabilities and requirements of a Web Service. Policies may include sensitive information. Malicious consumers may acquire sensitive information, fingerprint the service and infer service vulnerabilities. These threats can be mitigated by requiring authentication for sensitive information, by omitting sensitive information from the policy or by securing access to the policy. For securing access to policy metadata, policy providers can use mechanisms from other Web Services specifications such as WS-Security [[WS-Security 2004]] and WS-MetadataExchange [[WS-MetadataExchange]] .
If a policy expression is unsigned it could be easily tampered with or replaced. To prevent tampering or spoofing of policy, requestors should discard a policy unless it is signed by the provider and presented with sufficient credentials. Requestors should also check that the signer is actually authorized to express policies for the given policy subject.
A policy may offer several alternatives that vary from weak to strong set of requirements. An adversary may interfere and remove all the alternatives except the weakest one (say no security requirements). Or, an adversary may interfere and discard this policy and insert a weaker policy previously issued by the same provider. Policy authors or providers can mitigate these threats by sun-setting older or weaker policy alternatives. Requestors can mitigate these threats by discarding policies unless they are signed by the provider.
Malicious providers may include policy assertions in its policy whose behavior cannot be verified by examining the wire message from the provider to requestor. In general, requestors have no guarantee that a provider will behave as described in the provider’s policy expression. The provider may not and perform a malicious activity. For example, say the policy assertion is privacy notice information and the provider violates the semantics by disclosing private information. Requestors can mitigate this threat by discarding policy alternatives which include assertions whose behavior cannot be verified by examining the wire message from the provider to requestor. Assertion authors can mitigate this threat by not designing assertions whose behavior cannot be verified using wire messages.
Malicious providers may provide a policy expression with a large number of alternatives, a large number of assertions in alternatives, deeply nested policy expressions or chains of PolicyReference elements that expand exponentially (see the chained sample below; this is similar to the well-known DTD entity expansion attack). Policy implementers need to anticipate these rogue providers and use a configurable bound with defaults on number of policy alternatives, number of assertions in an alternative, depth of nested policy expressions, etc.
Example 5-1. Chained Policy Reference Elements
<wsp:Policy wsu:Id="p1"> <wsp:PolicyReference URI="#p2"/ > <wsp:PolicyReference URI="#p2"/> </wsp:Policy> <wsp:Policy wsu:Id="p2" > <wsp:PolicyReference URI="#p3"/> <wsp:PolicyReference URI="#p3"/> </wsp:Policy> <wsp:Policy wsu:Id="p3" > <wsp:PolicyReference URI="#p4"/> <wsp:PolicyReference URI="#p4"/> </wsp:Policy> <!-- Policy/@wsu:Id p4 through p99 --> <wsp:Policy wsu:Id="p100" > <wsp:PolicyReference URI="#p101"/> <wsp:PolicyReference URI="#p101"/> </wsp:Policy> <wsp:Policy wsu:Id="p101" > <mtom:OptimizedMimeSerialization /> </wsp:Policy>
Malicious providers may provide a policy expression that includes multiple PolicyReference elements that use a large number of different internet addresses. These may require the consumers to establish a large number of TCP connections. Policy implementers need to anticipate such rogue providers and use a configurable bound with defaults on number of PolicyReference elements per policy expression.
An element information item whose namespace name is "http://www.w3.org/ns/ws-policy" and whose local part is Policy or PolicyReference conforms to this specification if it is valid according to the XML Schema [[XML Schema Structures]] for that element as defined by this specification (http://www.w3.org/2007/02/ws-policy.xsd) and additionally adheres to all the constraints contained in this specification. Such a conformant element information item constitutes a policy expression.
This appendix defines the "application/wspolicy+xml" media type which
can be used to describe Web Services Policy documents serialized as XML. Either
wsp:Policy
or wsp:PolicyAttachment
could be the root
element of such a document. The "application/wspolicy+xml" media type
is being submitted to the IESG for review, approval, and registration with IANA.
application
wspolicy+xml
none
This parameter has identical semantics to the charset parameter of the "application/xml" media type as specified in [IETF RFC 3023].
Identical to those of "application/xml" as described in [IETF RFC 3023], section 3.2, as applied to the Web Services Policy document Infoset.
See section 5. Security Considerations in this document, and the Security Consideration section in [Web Services Policy Attachment].
There are no known interoperability issues.
This document and [Web Services Policy Attachment].
This new media type is being registered to allow for deployment of Web Services Policy and references to Web Services Policy on the World Wide Web.
wspolicy
A syntax identical to that of "application/xml" as described in [IETF RFC 3023].
As specified in [IETF RFC 3023], section 6. Also see section 4.6 Use of IRIs in Policy Expressions in this document and section 3.5 Use of IRIs in Policy Attachment in [Web Services Policy Attachment].
TEXT
World Wide Web Consortium <web-human@w3.org>
COMMON
The Web Services Policy 1.5 specification set is a work product of the World Wide Web Consortium's Web Service Policy Working Group. The W3C has change control over these specifications.
This document is the work of the W3C Web Services Policy Working Group.
Members of the Working Group are (at the time of writing, and by alphabetical order): Dimitar Angelov (SAP AG), Abbie Barbir (Nortel Networks), Charlton Barreto (Adobe Systems Inc.), Sergey Beryozkin (IONA Technologies, Inc.), Vladislav Bezrukov (SAP AG), Toufic Boubez (Layer 7 Technologies), Symon Chang (BEA Systems, Inc.), Paul Cotton (Microsoft Corporation), Glen Daniels (Sonic Software), Doug Davis (IBM Corporation), Jacques Durand (Fujitsu Limited), Ruchith Fernando (WSO2), Christopher Ferris (IBM Corporation), William Henry (IONA Technologies, Inc.), Frederick Hirsch (Nokia), Maryann Hondo (IBM Corporation), Ondrej Hrebicek (Microsoft Corporation), Steve Jones (Layer 7 Technologies), Tom Jordahl (Adobe Systems Inc.), Paul Knight (Nortel Networks), Philippe Le Hégaret (W3C/MIT), Mark Little (JBoss Inc.), Mohammad Makarechian (Microsoft Corporation), Ashok Malhotra (Oracle Corporation), Jonathan Marsh (WSO2), Monica Martin (Sun Microsystems, Inc.), Arnaud Meyniel (Axway Software), Jeff Mischkinsky (Oracle Corporation), Dale Moberg (Axway Software), Anthony Nadalin (IBM Corporation), David Orchard (BEA Systems, Inc.), Sanjay Patil (SAP AG), Manjula Peiris (WSO2), Fabian Ritzmann (Sun Microsystems, Inc.), Daniel Roth (Microsoft Corporation), Tom Rutt (Fujitsu Limited), Sanka Samaranayake (WSO2), Felix Sasaki (W3C/Keio), Skip Snow (Citigroup), Yakov Sverdlov (CA), Mark Temple-Raston (Citigroup), Asir Vedamuthu (Microsoft Corporation), Sanjiva Weerawarana (WSO2), Ümit Yalçinalp (SAP AG), Prasad Yendluri (webMethods, Inc.).
Previous members of the Working Group were: Jeffrey Crump, Jong Lee, Bob Natale, Eugene Osovetsky, Bijan Parsia, Seumas Soltysik.
The people who have contributed to discussions on public-ws-policy@w3.org are also gratefully acknowledged.
A list of major editorial changes since the Working Draft dated 05 June, 2007 is below:
Clarified that ifchanges a domain were to leverage the policy intersectionwith in the framework and specify domain specific intersection rules, the domain could only specify intersection rules for assertion parameters.specification.
Clarified how to interpret multiple assertions of the same type if policy assertion authorsmeaning did not specify the semantics of multiple policy assertions of a simple assertion type (that does not allow parameters and nested policy expression).
Clarified the behavior implied by an ignorable assertion.
Clarified the distributive rule and added an example to illustrate the case where a combination of Optional=false and Distributiveintersection rules apply.result.
Date | Author | Description |
---|---|---|
20060712 | ASV | Updated the list of editors. Completed action items 12, 16 and 20 from the Austin F2F. |
20060718 | DBO | Completed action items: RFC2606 for domain names 09 (note: PLH had already done but it didn't show up in the change log) |
20060726 | ASV | Incorporated the XML namespace URI versioning policy adopted by the WG. |
20060803 | PY | Completed Issue: 3551 Misc updates throughout. |
20060808 | PY | Completed action item: 20 to highlight infoset terms uniformly. |
20060808 | DBO | Completed action items: 15 as early as possible in the doc, use the definition that are defined in the doc. |
20060808 | ASV | Implemented the resolution for issue 3543 and the resolution for issue 'Modify wording in Abstract for Framework'. Restored Section 2.2 Extensibility (that was accidentally dropped). Completed action item 17 from the Austin F2F. |
20060809 | ASV | Implemented the resolution for issue 3563. |
20060811 | DBO | Completed action items: 15 remove use if emph/ital terms. Framework: removed emph on conceptually replace and support; attachment: make merge a termdef |
20060813 | ASV | Added a new Section D. Changes in this Version of the Document (that provides a list of substantive chanages since the previous publication). |
20060818 | ASV | Implemented the resolution for issue 3560. |
20060822 | TIB | Completed action item: resolution for issue 3565. |
20060824 | PY | Completed action item: resolution for issue 3552. |
20060827 | TIB | Completed action item: resolution for adding Conformance section. |
20060828 | DBO | Completed action item: Partial resolution for issue 3590. for adding document attribute extensbility of wsp:Policy/@{any} and wsp:Policy/.../wsp:PolicyReference/@{any} |
20060829 | ASV | Implemented the resolution for issue 3561: replaced URI with IRI. |
20060830 | DBO | Completed action item: resolution for issue 3604. Removing Goals section, resulted in moving Policy expression definition to 2nd para of intro. |
20060906 | DBO | Completed partial resolution for issue 3590. for adding document attribute extensbility of wsp:Policy/@{any} and wsp:Policy/.../wsp:PolicyReference/@{any}, specifically making attribute extensibility for any namespace. |
20060906 | TIB | Completed action item: resolution for issue 3607. Better describe policy language capabilities in the Introduction. |
20060912 | DBO | Completed action item: 6. |
20060913 | TIB | Completed action item: 8. |
20060913 | TIB | Completed action item: 31. |
20060913 | TIB | Completed action item: 11. |
20060918 | PY | Completed action item: 16. |
20060918 | PY | Completed action item: 17. |
20060918 | PY | Completed action item: 23 for issue 3617, Namespace URI versioning Policy is not clear. |
20060918 | PY | Completed action item: 33 for issue 3672, Clarify the policy model for Web Services. |
20060918 | PY | Completed action item: 34 for issue 3703, Element within policy expression must be an assertion. |
20060918 | PY | Completed action item: 39 for issue 3710, Clarify that policy assertion parameters are opaque to framework processing. |
20060918 | PY | Completed action item: 40 for issue 3711, Add Cross-Product description to 4.3.3 in Framework. |
20060920 | DBO | Completed action item: 24 for issues 3662, Add PolicyReference extensibility as ##any. And 25 for issue 3590, Add PolicyReference extensibility. |
20060921 | PY | Completed action item: 29 for issue 3577, Semantics of successful intersection determined by domain-specific assertion content. |
20060924 | TIB | Implemented the editorial action 35 to include the Security Considerations section from the Primer document. |
20060926 | ASV | Implemented the action item: 30 resolution for issue 3549. |
20060927 | MH | Completed action item: 02 resolution for issue 3706 - changing "domain authors" to "authors". |
20060927 | PY | Completed action item: 46 resolution for issue 3752 - Clarify restrictions of ID type usage. |
20061002 | DBO | Completed action item: 7. |
20061002 | DBO | Implemented the http://www.w3.org/2005/06/tracker/wspolicy/actions/64 for issue 3559: Conformance Section. |
20061002 | DBO | Implemented the resolution for issue 3712:wsp:PolicyReference can be used in any place where you can use wsp:Policy |
20061004 | PY | Completed action item: 10 Recast text at the beg of section to describe what's upcoming in the subsections. |
20061007 | TIB | Completed action item: 47 Issue 3602 Resolution - The absence of an assertion should not mean that the behavior is "explicitly prohibited". |
20061007 | TIB | Completed action item: 19 Add an intro paragraph that introduces the material in section 4.3.3. |
20061008 | MH | Completed action item: 45 Replace security policy example 1.1. as per issue 3753. |
20061011 | PY | Updated "Changes in this Version" section (Appendix C) |
20061012 | DBO | Revisited action items: 15 as early as possible in the doc, use the definition that are defined in the doc. Opened as Bug 3720 |
20061019 | PY | Completed action item: 57 PaulC's comments. |
20061027 | ASV | Implemented the resolution for issue 3705. |
20061030 | DBO | Implemented the resolution titled "Hyperlink terms such as policy expression..." |
20061102 | ASV | Implemented the resolution for Editors' Action 12. |
20061102 | ASV | Reset Section D. Changes in this Version of the Document. |
20061103 | ASV | Re-formatted the example in 5.5 Denial of Service Threats. |
20061109 | PY | Implemented the editorial changes for Issue 3961 for Editors' Action 75. |
20061109 | TIB | Implemented Editors' Action 73 to create a normative appendix for MIMe subtype wspolicy+xml. |
20061109 | TIB | Implemented Editors' Action 74. |
20061109 | ASV | Implemented the resolution for issues 3721 and 3789. |
20061109 | ASV | Implemented Editors' Action 70. |
20061109 | ASV | Updated Section D. Changes in this Version of the Document. |
20061114 | ASV | Fixed typos in Appendix A. The application/wspolicy+xml Media Type. |
20061127 | ASV | Added Frederick and Umit to the list of editors. Editors' action 86. |
20061213 | TIB | Implemented Editors' Action 93 for Mac MIME type. |
20061218 | FH | Implemented the resolution for issue 4039 to close editors' action 99. |
20061220 | PY | Completed action item: 98 resolution for issue 4038 - Nested policy not in normal form in section 4.3.2. |
20070108 | ASV | Reset Section D. Changes in this Version of the Document. |
20070116 | DBO | Completed action item: 123 and 115 Resolution for issue 4210 |
20070121 | MH | Completed action item: 129 Resolution for namespace dereferencing issue 4204 |
20070121 | MH | Completed action item: 130 Resolution for editorial issues 4205 |
20070121 | MH | Completed action item: 132 Resolution for changing format of example and removing text. 4224 |
20070122 | MH | Completed action item: 133 Resolution for editorial items. 4225 |
20070122 | PY | Completed action item: 117 Resolution for issue 4141 |
20070122 | PY | Completed action item: 120 Resolution for issue 4142 |
20070122 | PY | Completed action item: 122 Resolution for issue 4236 |
20070122 | PY | Completed action item: 125 Resolution for issue 4177 |
20070122 | PY | Completed action item: 128 Resolution for issue 4203 |
20070122 | PY | Completed action item: 127 Resolution for issue 4197 |
20070122 | ASV | Implemented the resolution for issue 4206. Editors' action 136. |
20070122 | ASV | Implemented the resolution for issue 4138. Editors' action 140. |
20070122 | ASV | Implemented the resolution for issue 4240. Editors' action 146. |
20070122 | ASV | Implemented the resolution for issue 4235. Editors' action 147. |
20070123 | ASV | Implemented the resolution for issues 4196 and 4238. Editors' action 142. |
20070123 | ASV | Fixed a typo in B.2 Other References: "[IETF RFC 3023]IETF "RFC 2246:". |
20070123 | ASV | Applied a missed item (re issue 4197) to section 2.2 Extensibility: Umit's amendment - "such as in Section 4.3.4 Policy References" and other changes. |
20070124 | ASV | Updated Section D. Changes in this Version of the Document. |
20070207 | PY | Implemented the resolution for issue 4307. Editors' action 156. |
20070207 | ASV | Implemented the resolution for issue 4306. Editors' action 158. |
20070222 | ASV | Applied a missed item (re issue 4204) to 2.3 XML Namespaces. |
20070313 | FJH | Applied resolution to issue 4379 with minor editorial revision (editors action 181). |
20070321 | ASV | Reset Section D. Changes in this Version of the Document. |
20070328 | FS | Re-formatted the first example in 4.3.2 Policy Assertion Nesting. |
20070426 | PY | Editorial changes to align with the OASIS WS-SecurityPolicy specification. For issue 4318. Editors' action 242. |
20070430 | TIB | Editorial changes for issue 4477. Editors' action 247. |
20070430 | TIB | Editorial changes for issue 4478. Editors' action 248. |
20070501 | ASV | Reset Section D. Changes in this Version of the Document. |
20070513 | ASV | Implemented the resolution for issue 4479. Editors' action 259. |
20070524 | DBO | Implemented the resolution for issue 4554. Editors' action 297. |
20070528 | MH | Implemented the changes proposed at F2F indicated by this reference for issue 4552. Editors' action 275. |
20070528 | MH | Implemented the changes proposed at F2F for issue 4556. Editors' action 276. |
20070529 | PY | Implemented the changes proposed at the Ottawa F2F for issue 4553. Editors' action 278. |
20070529 | PY | Implemented the changes proposed at the Ottawa F2F for issue 4555. Editors' action 279. |
20070529 | PY | Implemented the changes proposed at the Ottawa F2F for issue 4554. Editors' action 280. |
20070529 | ASV | Implemented the resolution for issue 4577. Editors' action 274. |
20070529 | ASV | Implemented the resolution for issue 4579. Editors' action 312. |
20070614 | ASV | Reset Section D. Changes in this Version of the Document. |
20070617 | ASV | Updated the WSDL 20 reference [[WSDL 2.0 Core Language]]. |
20070620 | FJH | Correct examples in 4.1 and 1.1, for SignedParts and EncryptedParts elements according to WG issue 4672. |