Skip to content

Meta element has no refresh delay

Description

This rule checks that the meta element is not used for delayed redirecting or refreshing.

Applicability

This rule applies to the first meta element in a document for which all the following are true:

Expectation

For each target, the time from the content attribute value is between 0 and 72000 (20 hours). To determine the time, run the shared declarative refresh steps on the meta element as described in the HTML refresh state.

Assumptions

Accessibility Support

Not all major web browsers parse the value of the content attribute in the same way. Some major browsers, when they are unable to parse the value, default to a 0 seconds delay, whereas others will not redirect at all. This can cause some pages to be inapplicable for this rule, while still having a redirect in a minority of web browsers.

Background

Because a refresh with a timing of 0 is a redirect, it is exempt from this rule. Since this can cause rapid screen flashes it is strongly recommended to avoid this.

This rule is designed specifically for 2.2.1 Timing Adjustable, which can be satisfied if the time limit is over 20 hours long. All pages that fail this because of a “refresh” meta element also do not satisfy 3.2.5 Change on Request. In order to adequately test the expectation, some of the passed examples do not satisfy 3.2.5 Change on Request.

Bibliography

Accessibility Requirements Mapping

Input Aspects

The following aspects are required in using this rule.

Test Cases

Passed

Passed Example 1

Open in a new tab

This page redirects to a new page immediately.

<head>
	<meta http-equiv="refresh" content="0; URL='https://github.com'" />
</head>

Passed Example 2

Open in a new tab

The first valid meta element on this page redirects to a new page immediately.

<head>
	<meta http-equiv="refresh" content="0; https://w3.org" />
	<meta http-equiv="refresh" content="5; https://w3.org" />
</head>

Passed Example 3

Open in a new tab

This page redirects after more than 20 hours.

<head>
	<meta http-equiv="refresh" content="72001; https://w3.org" />
</head>

Failed

Failed Example 1

Open in a new tab

This page refreshes after 30 seconds.

<head>
	<meta http-equiv="refresh" content="30" />
</head>
<body>
	<p>This page refreshes after 30 seconds.</p>
</body>

Failed Example 2

Open in a new tab

This page redirects to a new page after 30 seconds.

<head>
	<meta http-equiv="refresh" content="30; URL='https://w3.org'" />
</head>
<body>
	<p>This page redirects afte 30 seconds.</p>
</body>

Failed Example 3

Open in a new tab

The first meta element on this page is not valid because it uses colon (“:”) rather than semicolon (“;”). The second meta element redirects to a new page after 5 seconds.

<head>
	<meta http-equiv="refresh" content="0: https://w3.org" />
	<meta http-equiv="refresh" content="5; https://w3.org" />
</head>
<body>
	<p>This page refreshes after 5 seconds.</p>
</body>

Failed Example 4

Open in a new tab

This page redirects to a new page after exactly 20 hours.

<head>
	<meta http-equiv="refresh" content="72000; https://w3.org" />
</head>
<body>
	<p>This page redirects after exactly 20 hours.</p>
</body>

Inapplicable

Inapplicable Example 1

Open in a new tab

This page will not refresh because it lacks a content attribute.

<head>
	<meta http-equiv="refresh" />
</head>
<body>
	<p>This page does not refresh.</p>
</body>

Inapplicable Example 2

Open in a new tab

This page will not refresh because it lacks a http-equiv attribute.

<head>
	<meta content="30" />
</head>
<body>
	<p>This page does not refresh.</p>
</body>

Inapplicable Example 3

Open in a new tab

This ‘meta’ element contains an invalid content attribute and will not refresh the page.

<head>
	<meta http-equiv="refresh" content="0: https://w3.org" />
</head>
<body>
	<p>This page does not redirect.</p>
</body>

Inapplicable Example 4

Open in a new tab

This ‘meta’ element contains an invalid content attribute and will not refresh the page.

<head>
	<meta http-equiv="refresh" content="-00.12 foo" />
</head>
<body>
	<p>This page does not refresh.</p>
</body>

Inapplicable Example 5

Open in a new tab

This ‘meta’ element contains an invalid content attribute and will not refresh the page.

<head>
	<meta http-equiv="refresh" content="; 30" />
</head>
<body>
	<p>This page does not refresh.</p>
</body>

Inapplicable Example 6

Open in a new tab

This ‘meta’ element contains an invalid content attribute and will not refresh the page.

<head>
	<meta http-equiv="refresh" content="" />
</head>
<body>
	<p>This page does not refresh.</p>
</body>

Inapplicable Example 7

Open in a new tab

This ‘meta’ element contains an invalid content attribute and will not refresh the page.

<head>
	<meta http-equiv="refresh" content="+5; https://w3.org" />
</head>
<body>
	<p>This page does not redirect.</p>
</body>

Inapplicable Example 8

Open in a new tab

This ‘meta’ element contains an invalid content attribute and will not refresh the page.

<head>
	<meta http-equiv="refresh" content="foo; URL='https://w3.org'" />
</head>
<body>
	<p>This page does not redirect.</p>
</body>

Glossary

Attribute value

The attribute value of a content attribute set on an HTML element is the value that the attribute gets after being parsed and computed according to specifications. It may differ from the value that is actually written in the HTML code due to trimming whitespace or non-digits characters, default values, or case-insensitivity.

Some notable case of attribute value, among others:

This list is not exhaustive, and only serves as an illustration for some of the most common cases.

The attribute value of an IDL attribute is the value returned on getting it. Note that when an IDL attribute reflects a content attribute, they have the same attribute value.

Outcome

An outcome is a conclusion that comes from evaluating an ACT Rule on a test subject or one of its constituent test target. An outcome can be one of the three following types:

Note: A rule has one passed or failed outcome for every test target. When there are no test targets the rule has one inapplicable outcome. This means that each test subject will have one or more outcomes.

Note: Implementations using the EARL10-Schema can express the outcome with the outcome property. In addition to passed, failed and inapplicable, EARL 1.0 also defined an incomplete outcome. While this cannot be the outcome of an ACT Rule when applied in its entirety, it often happens that rules are only partially evaluated. For example, when applicability was automated, but the expectations have to be evaluated manually. Such “interim” results can be expressed with the incomplete outcome.

Rule Versions

  1. Latest version, 25 October 2022

Implementations

This section is not part of the official rule. It is populated dynamically and not accounted for in the change history or the last modified date.

Implementation Type Consistency Report
Alfa (fully automated) 0.80.0 Automated tool Consistent Alfa (fully automated) Report
Alfa (semi-automated) 0.80.0 Semi-automated tool Consistent Alfa (semi-automated) Report
Axe DevTools Pro 4.37.1 Semi-automated tool Consistent Axe DevTools Pro Report
Axe-core 4.8.3 Automated tool Consistent Axe-core Report
Equal Access Accessibility Checker 3.1.42-rc.0 Automated tool Consistent Equal Access Accessibility Checker Report
QualWeb 3.0.0 Automated tool Partial QualWeb Report
SortSite 6.45 Automated tool Consistent SortSite Report
Total Validator 17.4.0 Linter Consistent Total Validator Report
Total Validator (+Browser) 17.4.0 Automated tool Consistent Total Validator (+Browser) Report
Back to Top