Device Posture API

The device posture is the physical position in which a device holds which may be derived from sensors in addition to the angle. New types of mobile devices are appearing that have some sort of capabilities that allow them to change their posture. The most common types of devices are the ones that can fold (their screen or around their screen), allowing them to physically alter their form factor. The main interest in knowing the posture of a device is to enable new user experiences with responsive design.

Among the described "folding" devices, there are mainly two different physical form factors: devices with a single flexible screen (seamless), and devices with two screens (with seam). They can both fold around a hinge, and the current specification applies to both types. It should be clarified as well that both seamless and (devices) with seam can be of different dimension ranging from mobile and tablets to laptop sizes. It should also be noted that different devices will have different default orientations (portrait or landscape), and that the fold might happen in a vertical or horizontal way.

From enhancing the usability of a website by avoiding the area of a fold, to enabling innovative use cases for the web, knowing the posture of a device can help developers tailor their content to different devices.

Content can be consumed and browsed even when the device is not flat, in which case the developer might want to provide a different layout for it depending on the posture state in which the device is being used.

The following internal slots are added to the Document interface. As it name implies, it will house the value of the current posture the device is

Top-level traversables must have the following internal slots:

The [HTML] specification defines the Navigator interface, which this specification extends:

WebIDL[SecureContext, Exposed=(Window)]
partial interface Navigator {
  [SameObject] readonly attribute DevicePosture devicePosture;
};

WebIDL[SecureContext, Exposed=(Window)]
interface DevicePosture : EventTarget {
  readonly attribute DevicePostureType type;
  attribute EventHandler onchange;
};

enum DevicePostureType {
  "continuous",
  "folded"      
};

This specification defines the following posture values:

1. 

   Continuous posture: The continuous posture refers to a "flat" position. This is the default case for most devices not allowing different postures.

   It includes devices with no folds, hinges or similar capabilities.

   Due to the nature of hardware innovation, it also includes devices with dual, foldable, rollable or curved screens, as long as they are in a posture where the Document is expected to be displayed with a flat layout.

   Examples of these are:

   • Foldable device in a flat, fully unfolded posture.
   • Foldable device running the browser in a window/section that does not span across the hinge.
   • 2-in-1 device in tablet mode using only 1 screen/side.
   • Devices that do not fold.
   Note

   In some cases, devices can run several apps and be in a physical posture other than flat, but as long as the browser does not span through several screens/sections, the corresponding posture is continuous.

2. Folded posture: The folded posture refers to devices that can physically fold. These devices can have one flexible screen or two adjacent screens. This posture forms an angle between the displays/sections that does not exceed a 'flat' position.

   Examples of these are:

   • Foldable device with a vertical hinge and internal screens being used in a 'book' posture, where the content spans through both sections and forms an angle between ~30° and ~170°.
   • Foldable device with a horizontal hinge and internal screens being used in a 'laptop' posture.

In the API, the posture values are represented by the DevicePostureType enum values.

Every instance of Document has an internal slot [[CurrentPosture]], which should be initialized when the Document is created, otherwise they MUST be initialized the first time they are accessed and before their value is read. The user agent MUST run the device posture change steps with document set to the Document and disallowRecursion set to true to initialize it.

For a given Document, the current posture is derived from the current hinge angle and the screen orientation, and potentially other implementation-specific signals.

These tables are non-normative.

No new security considerations have been reported on this specification.

The Device Posture API exposes a posture determined from the hinge angle sensor, but additional data can be used to determine the posture such as whether the keyboard is attached or not, whether the kickstand is deployed or not, etc.

Device Posture exposes high level concept and not sensor values making fingerprinting possibilities more limited. Changing posture is a physical manipulation done by the user. The frequency of the posture changes are low, users do not constantly adjust the angle, and even if they do the posture will only be changed in certain scenarios as described in posture values table.

1. Designing and making applications which do not place content in the fold/hinge area, especially buttons. This area is typically hard to interact with with fingers because the curvature of the fold makes touch less precise or impossible.
2. Designing and making applications which do not put large, contiguous content (such as video or a picture) spanning across the fold/hinge area if the device is folded. This area slightly distorts content and colors.
3. Designing and making applications which use the screen estate better by providing a split UI (a user interface where the content is split up across the screen segments), allowing the application to provide a differentiated and more powerful interface.

• Placement of UI elements: A typical placement logic for dialogs is to center them horizontally and vertically, but in a device folded with a symmetrical fold they may end up in the middle of the fold area making it harder to interact with, for instance clicking on buttons. It might also make it harder to read text due to distortion and light reflection.
• Fullscreen mode: When resizing an element in fullscreen, a typical logic would expand that element to the width and the height of the Window. If the device is folded, the element will be laid out across the fold, leading to a subpar user experience. An alternative is to display that element either on top or below the fold area.
• Improving the user experience: With this API it is possible to create a different and adapted user experience when the device is folded, allowing for a better user experience and improved accessibility. For example, when watching a video and the device is folded, the video could be displayed on top of the fold while the comments section could be shown below the fold by default. Another example would be a video conferencing application showing the video feed on top of the fold and the chat below the fold.
• Content shouldn't be designed for just one posture: The idea of foldable devices is their versatility and the ability for the user to change the posture as they see fit. Similarly to the orientation, it is important to not always choose for the user as they might have other needs but allowing them to choose the UI that fits their needs better. Ideally it is preferred to make the UI configurable.

The Device Posture API pose a challenge to test authors, as fully exercising interface requires physical hardware devices. To address this challenge this document defines a [WEBDRIVER2] extension commands that allows users to control the reported device posture and simulate a real device.

As well as sections marked as non-normative, all authoring guidelines, diagrams, examples, and notes in this specification are non-normative. Everything else in this specification is normative.

The key words MUST and SHOULD in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

This specification defines conformance criteria for a single product: a user agent that implements the interfaces that it contains.