This document is also available in these non-normative formats: postscript, PDF, XML, and plain text.
Copyright © 2005 W3C® (MIT, ERCIM, Keio), All Rights Reserved. W3C liability, trademark and document use rules apply.
Web Services Addressing provides transport-neutral mechanisms to address Web services and messages. Web Services Addressing 1.0 - WSDL Binding (this document) defines how the abstract properties defined in Web Services Addressing 1.0 - Core are described using WSDL.
This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.
This is the second Public Working Draft of the Web Services Addressing 1.0 - WSDL Binding specification for review by W3C members and other interested parties. It has been produced by the Web Services Addressing Working Group (WG), which is part of the W3C Web Services Activity.
This Working Draft reflects the current position of the Working Group. A diff-marked version against the previous version of this document is available. For a detailed list of changes since the last publication of this document, please refer to appendix B. Change Log. A list of remaining issues is also available.
Discussion of this document takes place on the public-ws-addressing@w3.org mailing list (public archive). Comments on this specification should be sent to this mailing list.
This document was produced under the 5 February 2004 W3C Patent Policy. The Working Group maintains a public list of patent disclosures relevant to this document; that page also includes instructions for disclosing [and excluding] a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) with respect to this specification should disclose the information in accordance with section 6 of the W3C Patent Policy.
Per section 4 of the W3C Patent Policy, Working Group participants have 150 days from the title page date of this document to exclude essential claims from the W3C RF licensing requirements with respect to this document series. Exclusions are with respect to the exclusion reference document, defined by the W3C Patent Policy to be the latest version of a document in this series that is published no later than 90 days after the title page date of this document.
Publication as a Working Draft does not imply endorsement by the W3C Membership. This is a draft document and may be updated, replaced or obsoleted by other documents at any time. It is inappropriate to cite this document as other than work in progress.
Editorial note | |
The Web Services Addressing Working Group has decided to use XML Schema, where appropriate, to describe constructs defined in this specification. Note that this restricts use of Web Services Addressing to XML 1.0. |
1. Introduction
2. Endpoint References
3. Associating Action with WSDL
Operations
4. WS-Addressing and WSDL Message Exchange
Patterns
5. References
A. Acknowledgements
(Non-Normative)
B. Change Log (Non-Normative)
1. Introduction
1.1 Notational
Conventions
1.2 Namespaces
2. Endpoint References
2.1 Information
Model for Endpoint References
3. Associating Action with WSDL
Operations
3.1 Explicit
Association
3.2 Default
Action Pattern for WSDL 2.0
3.3 Default
Action Pattern for WSDL 1.1
4. WS-Addressing and WSDL Message Exchange
Patterns
4.1 WSDL 1.1 Message
Exchange Patterns
4.1.1 One-way
4.1.2 Request-Response
4.1.3 Notification
4.1.4 Solicit-response
4.2 WSDL 2.0 Message
Exchange Patterns
4.2.1 In-only
4.2.2 Robust In-only
4.2.3 In-out
4.2.4 In-optional-out
4.2.5 Out-only
4.2.6 Robust Out-only
4.2.7 Out-in
4.2.8 Out-optional-in
5. References
A. Acknowledgements
(Non-Normative)
B. Change Log (Non-Normative)
B.1 Changes Since
First Working Draft
B.2 Changes Since
Submission
Web Services Addressing 1.0 - Core[WS-Addressing-Core] defines a set of abstract properties and an XML Infoset [XML Information Set] representation thereof to reference Web service endpoints and to facilitate end-to-end addressing of endpoints in messages. Web Services Addressing 1.0 - WSDL Binding (this document) defines how the abstract properties defined in Web Services Addressing 1.0 - Core are described using WSDL.
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [IETF RFC 2119].
When describing abstract data models, this specification uses the notational convention used by the XML Infoset [XML Information Set]. Specifically, abstract property names always appear in square brackets (e.g., [some property]).
When describing concrete XML schemas [XML Schema Structures, XML Schema Datatypes], this specification uses the notational convention of WS-Security [WS-Security]. Specifically, each member of an element's [children] or [attributes] property is described using an XPath-like notation (e.g., /x:MyHeader/x:SomeProperty/@value1). The use of {any} indicates the presence of an element wildcard (<xs:any/>). The use of @{any} indicates the presence of an attribute wildcard (<xs:anyAttribute/>).
This specification uses a number of namespace prefixes throughout; they are listed in Table 1-1. Note that the choice of any namespace prefix is arbitrary and not semantically significant (see [XML Namespaces]).
Prefix | Namespace |
---|---|
S | http://www.w3.org/2003/05/soap-envelope |
S11 | http://schemas.xmlsoap.org/soap/envelope |
wsa | http://www.w3.org/2005/02/addressing |
xs | http://www.w3.org/2001/XMLSchema |
WS-Addressing is defined in terms of the XML Information Set [XML Information Set]. WS-Addressing is designed to be able to work with WSDL 2.0 [WSDL 2.0] and also (for backwards compatibility with WSDL 1.1 [WSDL 1.1] described services. WS-Addressing may be used with SOAP [SOAP 1.2 Part 1: Messaging Framework] as described in Web Services Addressing 1.0 - SOAP Binding[WS-Addressing-SOAP]. The examples in this specification use an XML 1.0 [XML 1.0] representation but this is not a requirement.
All information items defined by WS-Addressing are identified by the XML namespace URI [XML Namespaces] "http://www.w3.org/2005/02/addressing". A normative XML Schema [XML Schema Structures, XML Schema Datatypes] document can be obtained by dereferencing the XML namespace URI.
Web Services Addressing introduces a new description element type, the endpoint reference, to support a set of dynamic usage patterns not currently appropriately covered by WSDL 1.1 [WSDL 1.1].
To support these scenarios, we define a lightweight and extensible mechanism to dynamically reference and describe service endpoints and instances. Endpoint references logically extend the WSDL description model (e.g., portTypes, bindings, etc.), but do not replace it. Endpoint references can be used in the following cases:
Specific instances of a stateful service need to be reference or its instance-specific configuration details need to be transmitted.
A lightweight, self-contained description of a service endpoint needs to be communicated. In particular, this may be necessary when the details of the endpoint configuration are already shared by the communicating parties, but specific policy information needs to be added or updated, typically as a result of a dynamic configuration process.
Endpoint references complement and do not replace WSDL service references. We expect solutions built on WSDL to continue to utilize service references. The endpoint references may link to service references in WSDL, and support additional scenarios in which the WSDL information is not known by a party processing a message. These scenarios may include dynamic messaging or limited capability message processors.
The WSDL binding of Web Services Addressing introduces the following additional abstract properties:
A QName identifying a description of the sequences of messages that a service sends and/or receives. This corresponds to a WSDL 2.0 interface and/or a WSDL 1.1 port type.
A QName, NCName pair that provide a reference to a to a full description of a set of service endpoints. The QName identifies the set of endpoints at which a particular Web service is deployed, the NCName identifies one endpoint in particular. The set of endpoints is represented by a service in WSDL 2.0 and WSDL 1.1. A particular endpoint is represented by an endpoint in WSDL 2.0 and a port in WSDL 1.1.
WS-Addressing defines two mechanisms to associate an action with input, output and fault elements within a WSDL description: explicit and defaulting. Explicit association is described in section 3.1 Explicit Association; action defaulting is described in section 3.3 Default Action Pattern for WSDL 1.1 for WSDL 1.1 and section 3.2 Default Action Pattern for WSDL 2.0 for WSDL 2.0.
WS-Addressing defines a global attribute, wsa:Action, that may be used to explicitly define the value of the [action] property for messages in a WSDL description. The type of the attribute is xs:anyURI and it is used as an extension on the WSDL input, output and fault elements.
For example consider the following WSDL excerpt:
Example 3-1. Explicit specification of wsa:Action value in a WSDL 2.0 description.
<definitions targetNamespace="http://example.com/stockquote" ...> ... <interface name="StockQuoteInterface"> <operation name="GetLastTradePrice" pattern="http://www.w3.org/2004/08/wsdl/in-out"> <input element="tns:GetTradePricesInput" messageLabel="In" wsa:Action="http://example.com/GetQuote"/> <output element="tns:GetTradePricesOutput" messageLabel="Out" wsa:Action="http://example.com/Quote"/> </operation> </interface> ... </definitions>
The action for the input of the GetLastTradePrice operation within the StockQuoteInterface is explicitly defined to be http://example.com/GetQuote. The action for the output of this same operation is http://example.com/Quote.
Example 3-2. Explicit specification of wsa:Action value in a WSDL 1.1 description.
<definitions targetNamespace="http://example.com/stockquote" ...> ... <portType name="StockQuotePortType"> <operation name="GetLastTradePrice"> <input message="tns:GetTradePricesInput" wsa:Action="http://example.com/GetQuote"/> <output message="tns:GetTradePricesOutput" wsa:Action="http://example.com/Quote"/> </operation> </portType> ... </definitions>
The action for the input of the GetLastTradePrice operation within the StockQuotePortType is explicitly defined to be http://example.com/GetQuote. The action for the output of this same operation is http://example.com/Quote.
In the absence of the wsa:Action attribute, the following pattern is used in WSDL 2.0 documents to construct a default action for inputs and outputs. The general form of an action URI is as follows:
Example 3-3. Structure of defaulted wsa:Action URI in WSDL 2.0.
[target namespace]/[interface name]/[operation name][direction token]
For fault messages, the general form of an action URI is as follows:
Example 3-4. Structure of default wsa:Action URI for faults
[target namespace]/[interface name]/[fault name]
The "/" is a literal character to be included in the action. The values of the properties are as defined below.
[target namespace] is the {target namespace} of the interface. If [target namespace] ends with a "/" an additional "/" is not added.
[interface name] is the {name} of the interface.
[operation name] is the {name} of the operation.
[fault name] is the {name} of the fault.
[direction token] is:
Empty ("") where the operation's {message exchange pattern} is "http://www.w3.org/2004/08/wsdl/in-only", "http://www.w3.org/2004/08/wsdl/robust-in-only", "http://www.w3.org/2004/08/wsdl/out-only", or "http://www.w3.org/2004/08/wsdl/robust-out-only".
"Request" where the operation's {message exchange pattern} is "http://www.w3.org/2004/08/wsdl/in-out" or "http://www.w3.org/2004/08/wsdl/in-opt-out" and the message reference's {message label} = 'in'.
"Solicit" where the operation's {message exchange pattern} is "http://www.w3.org/2004/08/wsdl/out-in" or "http://www.w3.org/2004/08/wsdl/out-opt-in" and the message reference's {message label} = 'out'.
"Response" where the operation's {message exchange pattern} is "http://www.w3.org/2004/08/wsdl/in-out" or "http://www.w3.org/2004/08/wsdl/in-opt-out" and the message reference's {message label} = 'out'.
"Response" where the operation's {message exchange pattern} is "http://www.w3.org/2004/08/wsdl/out-in", or "http://www.w3.org/2004/08/wsdl/out-opt-in" and the message reference's {message label} = 'in'.
{message label} where the {message exchange pattern} is not one of the MEP URIs defined in WSDL 2.0 Part 2.
For example consider the following WSDL excerpt:
Example 3-5. Example WSDL without explicit wsa:Action values with explicit message names.
<definitions targetNamespace="http://example.com/stockquote" ...> ... <interface name="StockQuoteInterface"> <operation name="GetLastTradePrice" pattern="http://www.w3.org/2004/08/wsdl/in-out"> <input element="tns:GetTradePricesInput" messageLabel="in" name="GetQuote"/> <output element="tns:GetTradePricesOutput" messageLabel="out" name="Quote"/> </operation> </portType> ... </definitions>
[targetNamespace] = http://example.com/stockquote
[interface name] = StockQuoteInterface
[operation name] = GetLastTradePrice
[direction token] for input is Request
[direction token] for output is Response
Applying the pattern above with these values we have:
input action = http://example.com/stockquote/StockQuoteInterface/GetLastTradePriceRequest
output action = http://example.com/stockquote/StockQuoteInterface/GetLastTradePriceResponse
In the absence of the wsa:Action attribute, the following pattern is used to construct a default action for inputs and outputs. The general form of an action URI is as follows:
Example 3-6. Structure of defaulted wsa:Action URI.
[target namespace]/[port type name]/[input|output name]
For fault messages, the general form of an action URI is as follows:
Example 3-7. Structure of default wsa:Action URI for faults
[target namespace]/[port type name]/[operation name]Fault:[fault name]
The "/" and ":" are literal characters to be included in the action. The values of the properties are as defined below.
[target namespace] is the target namespace (/definition/@targetNamespace). If [target namespace] ends with a "/" an additional "/" is not added.
[port type name] is the name of the port type (/definition/portType/@name).
[input|output name] is the name of the element as defined in Section 2.4.5 of WSDL 1.1.
[fault name] is the name of the fault (/definition/porttype/operation/fault/@name).
For example consider the following WSDL excerpt:
Example 3-8. Example WSDL without explicit wsa:Action values with explicit message names.
<definitions targetNamespace="http://example.com/stockquote" ...> ... <portType name="StockQuotePortType"> <operation name="GetLastTradePrice"> <input message="tns:GetTradePricesInput" name="GetQuote"/> <output message="tns:GetTradePricesOutput" name="Quote"/> <fault message="tns:ErrorMessage" name="Error"/> </operation> </portType> ... </definitions>
[targetNamespace] = http://example.com/stockquote
[port type name] = StockQuotePortType
[input name] = GetQuote
[output name] = Quote
[fault name] = Error
Applying the pattern above with these values we have:
input action = http://example.com/stockquote/StockQuotePortType/GetQuote
output action = http://example.com/stockquote/StockQuotePortType/Quote
fault action = http://example.com/stockquote/StockQuotePortType/GetLastTradePriceFault:Error
WSDL defines rules for a default input or output name if the name attribute is not present. Consider the following example:
Example 3-9. Example WSDL without explicit wsa:Action values or explicit message names.
<definitions targetNamespace="http://example.com/stockquote" ...> ... <portType name="StockQuotePortType"> <operation name="GetLastTradePrice"> <input message="tns:GetTradePricesInput"/> <output message="tns:GetTradePricesOutput"/> </operation> </portType> ... </definitions>
[targetNamespace] = http://example.com/stockquote
[port type name] = StockQuotePortType
According to the rules defined in Section 2.4.5 of WSDL 1.1, if the name attribute is absent for the input of a request response operation the default value is the name of the operation "Request" appended.
[input name] = GetLastTradePriceRequest
Likewise, the output defaults to the operation name with "Response" appended.
[output name] = GetLastTradePriceResponse
Applying the pattern above with these values we have:
input action = http://example.com/stockquote/StockQuotePortType/GetLastTradePriceRequest
output action = http://example.com/stockquote/StockQuotePortType/GetLastTradePriceResponse
This section describes which of the core message properties are mandatory or optional for messages in the various MEPs defined by WSDL 1.1 and WSDL 2.0.
This section describes which of the core message properties are mandatory or optional for messages in the various MEPs defined by WSDL 1.1.
This is a straightforward one-way message. No responses are expected but related messages could be sent as part of other message exchanges.
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | N | Intended receiver for replies to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[fault endpoint] | N | Intended receiver for faults related to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[message id] | N | Unique identifier for this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[relationship] | N | Indicates relationship to a prior message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
This is request-response. A reply is expected hence mandating [reply endpoint] in the request message. The response message might be a fault.
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | Y | Intended receiver for the reply to this message. |
[fault endpoint] | N | Intended receiver for faults related to this message. May be included to direct fault messages to a different endpoint than [reply endpoint]. |
[message id] | Y | Unique identifier for this message. Used in the [relationship] property of the reply message. |
[relationship] | N | Indicates relationship to a prior message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | N | Intended receiver for replies to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[fault endpoint] | N | Intended receiver for faults related to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[message id] | N | Unique identifier for this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[relationship] | Y | Indicates that this message is a reply
to the request message using the request message [message id] value
and the predefined
http://www.w3.org/2005/02/addressing/reply URI. |
From the WS-Addressing perspective this MEP is the same as One-way. The properties defined in 4.1.1 One-way apply to this MEP also.
From the WS-Addressing perspective this MEP is the same as Request-response. The properties defined in 4.1.2 Request-Response apply to this MEP also.
This section describes which of the core message properties are mandatory or optional for messages in the various MEPs defined by WSDL 2.0.
This is a straightforward one-way message. No responses are expected but related messages could be sent as part of other message exchanges.
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | N | Intended receiver for replies to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[fault endpoint] | N | Intended receiver for faults related to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[message id] | N | Unique identifier for this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[relationship] | N | Indicates relationship to a prior message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
This one-way MEP allows fault messages. The [message id] property is needed in the initial message in order to be able to correlate any fault with that message.
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | N | Intended receiver for replies to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[fault endpoint] | N | Intended receiver for faults related to this message. |
[message id] | Y | Unique identifier for this message. Used in the [relationship] property of any resulting fault message. |
[relationship] | N | Indicates relationship to a prior message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
Editorial note: MJH | |
Given that [message id] is mandatory above, should [fault endpoint] also be required ? |
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | N | Intended receiver for replies to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[fault endpoint] | N | Intended receiver for faults related to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[message id] | N | Unique identifier for this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[relationship] | Y | Indicates that this message is a
response to the in message using the in message [message id] value
and the predefined
http://www.w3.org/2005/02/addressing/reply URI. |
Editorial note: MJH | |
Should [fault endpoint] be prohibited in the above ? This would prevent getting a fault in response to a fault. |
This is a two-way MEP. A reply is expected hence mandating [reply endpoint] in the request message. The response message might be a fault.
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | Y | Intended receiver for the reply to this message. |
[fault endpoint] | N | Intended receiver for faults related to this message. May be included to direct fault messages to a different endpoint than [reply endpoint]. |
[message id] | Y | Unique identifier for this message. Used in the [relationship] property of the out message. |
[relationship] | N | Indicates relationship to a prior message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
Property | Mandatory | Description |
---|---|---|
[destination] | Y | Provides the address of the intended receiver of this message |
[action] | Y | Identifies the semantics implied by this message |
[source endpoint] | N | Message origin. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[reply endpoint] | N | Intended receiver for replies to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[fault endpoint] | N | Intended receiver for faults related to this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[message id] | N | Unique identifier for this message. Unused in this MEP, but may be included to facilitate longer running message exchanges. |
[relationship] | Y | Indicates that this message is a
response to the in message using the in message [message id] value
and the predefined
http://www.w3.org/2005/02/addressing/reply URI. |
This MEP differs from the In-out MEP in that the subsequent message is optional. This difference doesn't affect the message properties so the properties defined in 4.2.3 In-out apply to this MEP also
From the WS-Addressing perspective this MEP is the same as In-only. The properties defined in 4.2.1 In-only apply to this MEP also.
From the WS-Addressing perspective this MEP is the same as Robust In-only. The properties defined in 4.2.2 Robust In-only apply to this MEP also.
From the WS-Addressing perspective this MEP is the same as In-out. The properties defined in 4.2.3 In-out apply to this MEP also.
This MEP differs from the Out-in MEP in that the subsequent message is optional. This difference doesn't affect the message properties so the properties defined in 4.2.3 In-out apply to this MEP also
This document is the work of the W3C Web Service Addressing Working Group.
Members of the Working Group are (at the time of writing, and by alphabetical order): Abbie Barbir (Nortel Networks), Rebecca Bergersen (IONA Technologies, Inc.), Andreas Bjärlestam (ERICSSON), Ugo Corda (SeeBeyond Technology Corporation), Francisco Curbera (IBM Corporation), Glen Daniels (Sonic Software), Paul Downey (BT), Jacques Durand (Fujitsu Limited), Michael Eder (Nokia), Robert Freund (Hitachi, Ltd.), Yaron Goland (BEA Systems, Inc.), Martin Gudgin (Microsoft Corporation), Arun Gupta (Sun Microsystems, Inc.), Hugo Haas (W3C/ERCIM), Marc Hadley (Sun Microsystems, Inc.), David Hull (TIBCO Software, Inc.), Yin-Leng Husband (HP), Anish Karmarkar (Oracle Corporation), Paul Knight (Nortel Networks), Philippe Le Hégaret (W3C/MIT), Mark Little (Arjuna Technologies Ltd.), Jonathan Marsh (Microsoft Corporation), Jeff Mischkinsky (Oracle Corporation), Nilo Mitra (ERICSSON), Eisaku Nishiyama (Hitachi, Ltd.), Mark Nottingham (BEA Systems, Inc.), Ales Novy (Systinet Inc.), David Orchard (BEA Systems, Inc.), Mark Peel (Novell, Inc.), Harris Reynolds (webMethods, Inc.), Tony Rogers (Computer Associates), Tom Rutt (Fujitsu Limited), Rich Salz (DataPower Technology, Inc.), Davanum Srinivas (Computer Associates), Jiri Tejkl (Systinet Inc.), Greg Truty (IBM Corporation), Steve Vinoski (IONA Technologies, Inc.), Pete Wenzel (SeeBeyond Technology Corporation), Steve Winkler (SAP AG), Ümit Yalçınalp (SAP AG).
Previous members of the Working Group were: @@@.
The people who have contributed to discussions on public-ws-addressing@w3.org are also gratefully acknowledged.
Date | Editor | Description |
---|---|---|
2005-01-24 @ 10:12 | mgudgin | Incorporated resolution of i034 and i035; default action URI for WSDL 2.0 and default action URI for faults. All edits in section 3 |
2005-01-18 @ 04:01 | mgudgin | Modified text in Section 2 WRT closing issue i020 |
2004-12-16 @ 18:20 | mhadley | Added resolution to issue 19 - WSDL version neutrality |
2004-12-16 @ 16:50 | mhadley | Added issue 33 resolution |
2004-12-14 @ 20:10 | mhadley | Switched back to edcopy formatting |
2004-12-14 @ 20:02 | mhadley | Enhanced auto-changelog generation to allow specification of data ranges for logs. Split change log to show changes between early draft and first working draft and changes since first working draft. |
2004-12-14 @ 18:13 | mhadley | Added resolutions for issues 12 (EPR lifecycle), 37 (relationship from QName to URI) and 39 (spec name versioning) |
Date | Editor | Description |
---|---|---|
2004-12-04 @ 02:04 | mgudgin | Added text to section on WSDL MEPs per resolution of Issue i003 |
2004-11-23 @ 21:38 | mhadley | Updated titles of examples. Fixed table formatting and references. Replaced uuid URIs with http URIs in examples. Added document status. |
2004-11-11 @ 18:31 | mgudgin | Added some TBD sections |
2004-11-07 @ 02:03 | mhadley | Second more detailed run through to separate core, SOAP and WSDL document contents. Removed dependency on WS-Policy. Removed references to WS-Trust and WS-SecurityPolicy |
2004-11-02 @ 21:45 | mhadley | Replaced hardcoded change log with one generated dynamically from CVS |
2004-10-28 @ 18:09 | mhadley | Fixed typo in abstract |
2004-10-28 @ 17:05 | mhadley | Initial cut of separating specification into core, soap and wsdl |