HTTP Working Group T. Berners-Lee, MIT/LCS INTERNET-DRAFT R. Fielding, UC Irvine <draft-ietf-http-v10-spec-05.html> H. Frystyk, MIT/LCS Expires August 19, 1996 February 19, 1996
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress".
To learn the current status of any Internet-Draft, please check the "1id-abstracts.txt"
listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa),
nic.nordu.net (Europe), munnari.oz.au (Pacific Rim), ds.internic.net (US East
Coast), or ftp.isi.edu (US West Coast).
Distribution of this document is unlimited. Please send comments to the HTTP working group
at <http-wg@cuckoo.hpl.hp.com>. Discussions of the working group are archived at
<URL:http://www.ics.uci.edu/pub/ietf/http/>.
General discussions about HTTP
and the applications which use HTTP should take place on the <www-talk@w3.org> mailing
list.
HTTP has been in use by the World-Wide Web global information initiative since 1990. This specification reflects common usage of the protocol referred to as "HTTP/1.0".
1. Introduction
1.1 Purpose
1.2 Terminology
1.3 Overall Operation
1.4 HTTP and MIME
2. Notational Conventions and Generic Grammar
2.1 Augmented BNF
2.2 Basic Rules
3. Protocol Parameters
3.1 HTTP Version
3.2 Uniform Resource Identifiers
3.2.1 General Syntax
3.2.2 http URL
3.3 Date/Time Formats
3.4 Character Sets
3.5 Content Codings
3.6 Media Types
3.6.1 Canonicalization and Text Defaults
3.6.2 Multipart Types
3.7 Product Tokens
4. HTTP Message
4.1 Message Types
4.2 Message Headers
4.3 General Header Fields
5. Request
5.1 Request-Line
5.1.1 Method
5.1.2 Request-URI
5.2 Request Header Fields
6. Response
6.1 Status-Line
6.1.1 Status Code and Reason Phrase
6.2 Response Header Fields
7. Entity
7.1 Entity Header Fields
7.2 Entity Body
7.2.1 Type
7.2.2 Length
8. Method Definitions
8.1 GET
8.2 HEAD
8.3 POST
9. Status Code Definitions
9.1 Informational 1xx
9.2 Successful 2xx
200 OK
201 Created
202 Accepted
204 No Content
9.3 Redirection 3xx
300 Multiple Choices
301 Moved Permanently
302 Moved Temporarily
304 Not Modified
9.4 Client Error 4xx
400 Bad Request
401 Unauthorized
403 Forbidden
404 Not Found
9.5 Server Error 5xx
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
10. Header Field Definitions
10.1 Allow
10.2 Authorization
10.3 Content-Encoding
10.4 Content-Length
10.5 Content-Type
10.6 Date
10.7 Expires
10.8 From
10.9 If-Modified-Since
10.10 Last-Modified
10.11 Location
10.12 Pragma
10.13 Referer
10.14 Server
10.15 User-Agent
10.16 WWW-Authenticate
11. Access Authentication
11.1 Basic Authentication Scheme
12. Security Considerations
12.1 Authentication of Clients
12.2 Safe Methods
12.3 Abuse of Server Log Information
12.4 Transfer of Sensitive Information
12.5 Attacks Based On File and Path Names
13. Acknowledgments
14. References
15. Authors' Addresses
Appendix A. Internet Media Type message/http
Appendix B. Tolerant Applications
Appendix C. Relationship to MIME
C.1 Conversion to Canonical Form
C.2 Conversion of Date Formats
C.3 Introduction of Content-Encoding
C.4 No Content-Transfer-Encoding
C.5 HTTP Header Fields in Multipart Body-Parts
Appendix D. Additional Features
D.1 Additional Request Methods
D.1.1 PUT
D.1.2 DELETE
D.1.3 LINK
D.1.4 UNLINK
D.2 Additional Header Field Definitions
D.2.1 Accept
D.2.2 Accept-Charset
D.2.3 Accept-Encoding
D.2.4 Accept-Language
D.2.5 Content-Language
D.2.6 Link
D.2.7 MIME-Version
D.2.8 Retry-After
D.2.9 Title
D.2.10 URI
Practical information systems require more functionality than simple retrieval, including search, front-end update, and annotation. HTTP allows an open-ended set of methods to be used to indicate the purpose of a request. It builds on the discipline of reference provided by the Uniform Resource Identifier (URI) [2], as a location (URL) [4] or name (URN) [16], for indicating the resource on which a method is to be applied. Messages are passed in a format similar to that used by Internet Mail [7] and the Multipurpose Internet Mail Extensions (MIME) [5].
HTTP is also used as a generic protocol for communication between user agents and proxies/gateways to other Internet protocols, such as SMTP [12], NNTP [11], FTP [14], Gopher [1], and WAIS [8], allowing basic hypermedia access to resources available from diverse applications and simplifying the implementation of user agents.
Most HTTP communication is initiated by a user agent and consists of a request to be applied to a resource on some origin server. In the simplest case, this may be accomplished via a single connection (v) between the user agent (UA) and the origin server (O).
request chain ------------------------>
UA -------------------v------------------- O
<----------------------- response chain
A more complicated situation occurs when one or more intermediaries are present in the
request/response chain. There are three common forms of intermediary: proxy, gateway, and
tunnel. A proxy is a forwarding agent, receiving requests for a URI in its absolute form,
rewriting all or parts of the message, and forwarding the reformatted request toward the server
identified by the URI. A gateway is a receiving agent, acting as a layer above some other
server(s) and, if necessary, translating the requests to the underlying server's protocol. A tunnel
acts as a relay point between two connections without changing the messages; tunnels are used
when the communication needs to pass through an intermediary (such as a firewall) even when
the intermediary cannot understand the contents of the messages.
request chain -------------------------------------->
UA -----v----- A -----v----- B -----v----- C -----v----- O
<------------------------------------- response chain
The figure above shows three intermediaries (A, B, and C) between the user agent and origin
server. A request or response message that travels the whole chain must pass through four
separate connections. This distinction is important because some HTTP communication
options may apply only to the connection with the nearest, non-tunnel neighbor, only to the
end-points of the chain, or to all connections along the chain. Although the diagram is linear,
each participant may be engaged in multiple, simultaneous communications. For example, B
may be receiving requests from many clients other than A, and/or forwarding requests to
servers other than C, at the same time that it is handling A's request.
Any party to the communication which is not acting as a tunnel may employ an internal cache for handling requests. The effect of a cache is that the request/response chain is shortened if one of the participants along the chain has a cached response applicable to that request. The following illustrates the resulting chain if B has a cached copy of an earlier response from O (via C) for a request which has not been cached by UA or A.
request chain ---------->
UA -----v----- A -----v----- B - - - - - - C - - - - - - O
<--------- response chain
Not all responses are cachable, and some requests may contain modifiers which place special
requirements on cache behavior. Some HTTP/1.0 applications use heuristics to describe what
is or is not a "cachable" response, but these rules are not standardized.
On the Internet, HTTP communication generally takes place over TCP/IP connections. The default port is TCP 80 [15], but other ports can be used. This does not preclude HTTP from being implemented on top of any other protocol on the Internet, or on other networks. HTTP only presumes a reliable transport; any protocol that provides such guarantees can be used, and the mapping of the HTTP/1.0 request and response structures onto the transport data units of the protocol in question is outside the scope of this specification.
Except for experimental applications, current practice requires that the connection be established by the client prior to each request and closed by the server after sending the response. Both clients and servers should be aware that either party may close the connection prematurely, due to user action, automated time-out, or program failure, and should handle such closing in a predictable fashion. In any case, the closing of the connection by either or both parties always terminates the current request, regardless of its status.
name = definition
"<" and ">") and is
separated from its definition by the equal character "=". Whitespace is only significant in
that indentation of continuation lines is used to indicate a rule definition that spans more
than one line. Certain basic rules are in uppercase, such as SP, LWS, HT, CRLF, DIGIT,
ALPHA, etc. Angle brackets are used within definitions whenever their presence will
facilitate discerning the use of rule names.
"literal"
rule1 | rule2
"I") are alternatives, e.g., "yes | no" will accept yes or no.
(rule1 rule2)
"(elem (foo | bar) elem)" allows the token sequences "elem foo elem" and "elem bar elem".
*rule
"*" preceding an element indicates repetition. The full form is
"<n>*<m>element" indicating at least <n> and at most <m> occurrences of element. Default
values are 0 and infinity so that "*(element)" allows any number, including zero; "1*element"
requires at least one; and "1*2element" allows one or two.
[rule]
"[foo bar]" is equivalent to "*1(foo bar)".
rule
"<n>(element)" is equivalent to "<n>*<n>(element)"; that is, exactly <n>
occurrences of (element). Thus 2DIGIT is a 2-digit number, and 3ALPHA is a string of three
alphabetic characters.
#rule
"#" is defined, similar to "*", for defining lists of elements. The full form is
"<n>#<m>element" indicating at least <n> and at most <m> elements, each separated by one
or more commas (",") and optional linear whitespace (LWS). This makes the usual form of
lists very easy; a rule such as "( *LWS element *( *LWS "," *LWS element ))" can be shown as
"1#element". Wherever this construct is used, null elements are allowed, but do not
contribute to the count of elements present. That is, "(element), , (element)" is permitted, but
counts as only two elements. Therefore, where at least one element is required, at least one
non-null element must be present. Default values are 0 and infinity so that "#(element)"
allows any number, including zero; "1#element" requires at least one; and "1#2element"
allows one or two.
; comment
implied *LWS
LWS) can be included between any two adjacent words (token or
quoted-string), and between adjacent tokens and delimiters (tspecials), without changing the
interpretation of a field. At least one delimiter (tspecials) must exist between any two
tokens, since they would otherwise be interpreted as a single token. However, applications
should attempt to follow "common form" when generating HTTP constructs, since there
exist some implementations that fail to accept anything beyond the common forms.
OCTET = <any 8-bit sequence of data>
CHAR = <any US-ASCII character (octets 0 - 127)>
UPALPHA = <any US-ASCII uppercase letter "A".."Z">
LOALPHA = <any US-ASCII lowercase letter "a".."z">
ALPHA = UPALPHA | LOALPHA
DIGIT = <any US-ASCII digit "0".."9">
CTL = <any US-ASCII control character
(octets 0 - 31) and DEL (127)>
CR = <US-ASCII CR, carriage return (13)>
LF = <US-ASCII LF, linefeed (10)>
SP = <US-ASCII SP, space (32)>
HT = <US-ASCII HT, horizontal-tab (9)>
<"> = <US-ASCII double-quote mark (34)>
HTTP/1.0 defines the octet sequence CR LF as the end-of-line marker for all protocol elements
except the Entity-Body (see Appendix B for tolerant applications). The end-of-line marker
within an Entity-Body is defined by its associated media type, as described in Section 3.6.
CRLF = CR LF
HTTP/1.0 headers may be folded onto multiple lines if each continuation line begins with a
space or horizontal tab. All linear whitespace, including folding, has the same semantics as SP.
LWS = [CRLF] 1*( SP | HT )
However, folding of header lines is not expected by some applications, and should not be
generated by HTTP/1.0 applications.
The TEXT rule is only used for descriptive field contents and values that are not intended to be
interpreted by the message parser. Words of *TEXT may contain octets from character sets other
than US-ASCII.
TEXT = <any OCTET except CTLs,
but including LWS>
Recipients of header field TEXT containing octets outside the US-ASCII character set may
assume that they represent ISO-8859-1 characters.
Hexadecimal numeric characters are used in several protocol elements.
HEX = "A" | "B" | "C" | "D" | "E" | "F"
| "a" | "b" | "c" | "d" | "e" | "f" | DIGIT
Many HTTP/1.0 header field values consist of words separated by LWS or special characters.
These special characters must be in a quoted string to be used within a parameter value.
word = token | quoted-string
token = 1*<any CHAR except CTLs or tspecials>
tspecials = "(" | ")" | "<" | ">" | "@"
| "," | ";" | ":" | "\" | <">
| "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT
Comments may be included in some HTTP header fields by surrounding the comment text with
parentheses. Comments are only allowed in fields containing "comment" as part of their field
value definition. In all other fields, parentheses are considered part of the field value.
comment = "(" *( ctext | comment ) ")"
ctext = <any TEXT excluding "(" and ")">
A string of text is parsed as a single word if it is quoted using double-quote marks.
quoted-string = ( <"> *(qdtext) <"> )
qdtext = <any CHAR except <"> and CTLs,
but including LWS>
Single-character quoting using the backslash ("\") character is not permitted in HTTP/1.0.
The version of an HTTP message is indicated by an HTTP-Version field in the first line of the
message. If the protocol version is not specified, the recipient must assume that the message is
in the simple HTTP/0.9 format.
HTTP-Version = "HTTP" "/" 1*DIGIT "." 1*DIGIT
Note that the major and minor numbers should be treated as separate integers and that each may
be incremented higher than a single digit. Thus, HTTP/2.4 is a lower version than HTTP/2.13,
which in turn is lower than HTTP/12.3. Leading zeros should be ignored by recipients and
never generated by senders.
This document defines both the 0.9 and 1.0 versions of the HTTP protocol. Applications
sending Full-Request or Full-Response messages, as defined by this specification, must include
an HTTP-Version of "HTTP/1.0".
HTTP/1.0 servers must:
Request-Line for HTTP/0.9 and HTTP/1.0 requests;
Status-Line for HTTP/1.0 responses;
URI = ( absoluteURI | relativeURI ) [ "#" fragment ]
absoluteURI = scheme ":" *( uchar | reserved )
relativeURI = net_path | abs_path | rel_path
net_path = "//" net_loc [ abs_path ]
abs_path = "/" rel_path
rel_path = [ path ] [ ";" params ] [ "?" query ]
path = fsegment *( "/" segment )
fsegment = 1*pchar
segment = *pchar
params = param *( ";" param )
param = *( pchar | "/" )
scheme = 1*( ALPHA | DIGIT | "+" | "-" | "." )
net_loc = *( pchar | ";" | "?" )
query = *( uchar | reserved )
fragment = *( uchar | reserved )
pchar = uchar | ":" | "@" | "&" | "=" | "+"
uchar = unreserved | escape
unreserved = ALPHA | DIGIT | safe | extra | national
escape = "%" HEX HEX
reserved = ";" | "/" | "?" | ":" | "@" | "&" | "=" | "+"
extra = "!" | "*" | "'" | "(" | ")" | ","
safe = "$" | "-" | "_" | "."
unsafe = CTL | SP | <"> | "#" | "%" | "<" | ">"
national = <any OCTET excluding ALPHA, DIGIT,
reserved, extra, safe, and unsafe>
For definitive information on URL syntax and semantics, see RFC 1738 [4] and RFC 1808 [9].
The BNF above includes national characters not allowed in valid URLs as specified by
RFC 1738, since HTTP servers are not restricted in the set of unreserved characters allowed to
represent the rel_path part of addresses, and HTTP proxies may receive requests for URIs not
defined by RFC 1738.
http_URL = "http:" "//" host [ ":" port ] [ abs_path ]
host = <A legal Internet host domain name
or IP address (in dotted-decimal form),
as defined by Section 2.1 of RFC 1123>
port = *DIGIT
If the port is empty or not given, port 80 is assumed. The semantics are that the identified
resource is located at the server listening for TCP connections on that port of that host, and the
Request-URI for the resource is abs_path. If the abs_path is not present in the URL, it must be
given as "/" when used as a Request-URI (Section 5.1.2).
Note: Although the HTTP protocol is independent of the transport layer protocol, the http URL only identifies resources by their TCP location, and thus non-TCP resources must be identified by some other URI scheme.The canonical form for "http" URLs is obtained by converting any
UPALPHA characters in host
to their LOALPHA equivalent (hostnames are case-insensitive), eliding the [ ":" port ] if the port
is 80, and replacing an empty abs_path with "/".
Sun, 06 Nov 1994 08:49:37 GMT ; RFC 822, updated by RFC 1123
Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036
Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format
The first format is preferred as an Internet standard and represents a fixed-length subset of that
defined by RFC 1123 [6] (an update to RFC 822 [7]). The second format is in common use, but
is based on the obsolete RFC 850 [10] date format and lacks a four-digit year. HTTP/1.0 clients
and servers that parse the date value should accept all three formats, though they must never
generate the third (asctime) format.
Note: Recipients of date values are encouraged to be robust in accepting date values that may have been generated by non-HTTP applications, as is sometimes the case when retrieving or posting messages via proxies/gateways to SMTP or NNTP.All HTTP/1.0 date/time stamps must be represented in Universal Time (UT), also known as Greenwich Mean Time (GMT), without exception. This is indicated in the first two formats by the inclusion of "GMT" as the three-letter abbreviation for time zone, and should be assumed when reading the asctime format.
HTTP-date = rfc1123-date | rfc850-date | asctime-date
rfc1123-date = wkday "," SP date1 SP time SP "GMT"
rfc850-date = weekday "," SP date2 SP time SP "GMT"
asctime-date = wkday SP date3 SP time SP 4DIGIT
date1 = 2DIGIT SP month SP 4DIGIT
; day month year (e.g., 02 Jun 1982)
date2 = 2DIGIT "-" month "-" 2DIGIT
; day-month-year (e.g., 02-Jun-82)
date3 = month SP ( 2DIGIT | ( SP 1DIGIT ))
; month day (e.g., Jun 2)
time = 2DIGIT ":" 2DIGIT ":" 2DIGIT
; 00:00:00 - 23:59:59
wkday = "Mon" | "Tue" | "Wed"
| "Thu" | "Fri" | "Sat" | "Sun"
weekday = "Monday" | "Tuesday" | "Wednesday"
| "Thursday" | "Friday" | "Saturday" | "Sunday"
month = "Jan" | "Feb" | "Mar" | "Apr"
| "May" | "Jun" | "Jul" | "Aug"
| "Sep" | "Oct" | "Nov" | "Dec"
Note: HTTP requirements for the date/time stamp format apply only to their usage within the protocol stream. Clients and servers are not required to use these formats for user presentation, request logging, etc.
The term "character set" is used in this document to refer to a method used with one or more tables to convert a sequence of octets into a sequence of characters. Note that unconditional conversion in the other direction is not required, in that not all characters may be available in a given character set and a character set may provide more than one sequence of octets to represent a particular character. This definition is intended to allow various kinds of character encodings, from simple single-table mappings such as US-ASCII to complex table switching methods such as those that use ISO 2022's techniques. However, the definition associated with a MIME character set name must fully specify the mapping to be performed from octets to characters. In particular, use of external profiling information to determine the exact mapping is not permitted.
Note: This use of the term "character set" is more commonly referred to as a "character encoding." However, since HTTP and MIME share the same registry, it is important that the terminology also be shared.HTTP character sets are identified by case-insensitive tokens. The complete set of tokens are defined by the IANA Character Set registry [15]. However, because that registry does not define a single, consistent token for each character set, we define here the preferred names for those character sets most likely to be used with HTTP entities. These character sets include those registered by RFC 1521 [5] -- the US-ASCII [17] and ISO-8859 [18] character sets -- and other names specifically recommended for use within MIME charset parameters.
charset = "US-ASCII"
| "ISO-8859-1" | "ISO-8859-2" | "ISO-8859-3"
| "ISO-8859-4" | "ISO-8859-5" | "ISO-8859-6"
| "ISO-8859-7" | "ISO-8859-8" | "ISO-8859-9"
| "ISO-2022-JP" | "ISO-2022-JP-2" | "ISO-2022-KR"
| "UNICODE-1-1" | "UNICODE-1-1-UTF-7" | "UNICODE-1-1-UTF-8"
| token
Although HTTP allows an arbitrary token to be used as a charset value, any token that has a
predefined value within the IANA Character Set registry [15] must represent the character set
defined by that registry. Applications should limit their use of character sets to those defined by
the IANA registry.
The character set of an entity body should be labelled as the lowest common denominator of the character codes used within that body, with the exception that no label is preferred over the labels US-ASCII or ISO-8859-1.
content-coding = "x-gzip" | "x-compress" | token
Note: For future compatibility, HTTP/1.0 applications should consider "gzip" and "compress" to be equivalent to "x-gzip" and "x-compress", respectively.All
content-coding values are case-insensitive. HTTP/1.0 uses content-coding values in the
Content-Encoding (Section 10.3) header field. Although the value describes the content-coding,
what is more important is that it indicates what decoding mechanism will be required to remove
the encoding. Note that a single program may be capable of decoding multiple content-coding
formats. Two values are defined by this specification:
x-gzip
x-compress
Note: Use of program names for the identification of encoding formats is not desirable and should be discouraged for future encodings. Their use here is representative of historical practice, not good design.
Content-Type header field (Section 10.5) in order
to provide open and extensible data typing.
media-type = type "/" subtype *( ";" parameter )
type = token
subtype = token
Parameters may follow the type/subtype in the form of attribute/value pairs.
parameter = attribute "=" value
attribute = token
value = token | quoted-string
The type, subtype, and parameter attribute names are case-insensitive. Parameter values may
or may not be case-sensitive, depending on the semantics of the parameter name. LWS must not
be generated between the type and subtype, nor between an attribute and its value. Upon receipt
of a media type with an unrecognized parameter, a user agent should treat the media type as if
the unrecognized parameter and its value were not present.
Some older HTTP applications do not recognize media type parameters. HTTP/1.0 applications should only use media type parameters when they are necessary to define the content of a message.
Media-type values are registered with the Internet Assigned Number Authority (IANA [15]). The media type registration process is outlined in RFC 1590 [13]. Use of non-registered media types is discouraged.
Entity-Body transferred
via HTTP must be represented in the appropriate canonical form prior to its transmission. If the
body has been encoded with a Content-Encoding, the underlying data should be in canonical
form prior to being encoded.
Media subtypes of the "text" type use CRLF as the text line break when in canonical form.
However, HTTP allows the transport of text media with plain CR or LF alone representing a line
break when used consistently within the Entity-Body. HTTP applications must accept CRLF, bare
CR, and bare LF as being representative of a line break in text media received via HTTP.
In addition, if the text media is represented in a character set that does not use octets 13 and 10
for CR and LF respectively, as is the case for some multi-byte character sets, HTTP allows the
use of whatever octet sequences are defined by that character set to represent the equivalent of
CR and LF for line breaks. This flexibility regarding line breaks applies only to text media in
the Entity-Body; a bare CR or LF should not be substituted for CRLF within any of the HTTP
control structures (such as header fields and multipart boundaries).
The "charset" parameter is used with some media types to define the character set (Section 3.4) of the data. When no explicit charset parameter is provided by the sender, media subtypes of the "text" type are defined to have a default charset value of "ISO-8859-1" when received via HTTP. Data in character sets other than "ISO-8859-1" or its subsets must be labelled with an appropriate charset value in order to be consistently interpreted by the recipient.
Note: Many current HTTP servers provide data using charsets other than "ISO-8859-1" without proper labelling. This situation reduces interoperability and is not recommended. To compensate for this, some HTTP user agents provide a configuration option to allow the user to change the default interpretation of the media type character set when no charset parameter is given.
Entity-Body. The multipart types registered by IANA [15] do not have any
special meaning for HTTP/1.0, though user agents may need to understand each type in order
to correctly interpret the purpose of each body-part. An HTTP user agent should follow the
same or similar behavior as a MIME user agent does upon receipt of a multipart type. HTTP
servers should not assume that all HTTP clients are prepared to handle multipart types.
All multipart types share a common syntax and must include a boundary parameter as part of
the media type value. The message body is itself a protocol element and must therefore use only
CRLF to represent line breaks between body-parts. Multipart body-parts may contain HTTP
header fields which are significant to the meaning of that part.
product = token ["/" product-version]
product-version = token
Examples:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3
Server: Apache/0.8.4
Product tokens should be short and to the point -- use of them for advertizing or other
non-essential information is explicitly forbidden. Although any token character may appear in
a product-version, this token should only be used for a version identifier (i.e., successive versions
of the same product should only differ in the product-version portion of the product value).
HTTP-message = Simple-Request ; HTTP/0.9 messages
| Simple-Response
| Full-Request ; HTTP/1.0 messages
| Full-Response
Full-Request and Full-Response use the generic message format of RFC 822 [7] for transferring
entities. Both messages may include optional header fields (also known as "headers") and an
entity body. The entity body is separated from the headers by a null line (i.e., a line with nothing
preceding the CRLF).
Full-Request = Request-Line ; Section 5.1
*( General-Header ; Section 4.3
| Request-Header ; Section 5.2
| Entity-Header ) ; Section 7.1
CRLF
[ Entity-Body ] ; Section 7.2
Full-Response = Status-Line ; Section 6.1
*( General-Header ; Section 4.3
| Response-Header ; Section 6.2
| Entity-Header ) ; Section 7.1
CRLF
[ Entity-Body ] ; Section 7.2
Simple-Request and Simple-Response do not allow the use of any header information and are
limited to a single request method (GET).
Simple-Request = "GET" SP Request-URI CRLF
Simple-Response = [ Entity-Body ]
Use of the Simple-Request format is discouraged because it prevents the server from identifying
the media type of the returned entity.
General-Header (Section 4.3), Request-Header (Section 5.2),
Response-Header (Section 6.2), and Entity-Header (Section 7.1) fields, follow the same generic
format as that given in Section 3.1 of RFC 822 [7]. Each header field consists of a name
followed immediately by a colon (":"), a single space (SP) character, and the field value. Field
names are case-insensitive. Header fields can be extended over multiple lines by preceding
each extra line with at least one SP or HT, though this is not recommended.
HTTP-header = field-name ":" [ field-value ] CRLF
field-name = token
field-value = *( field-content | LWS )
field-content = <the OCTETs making up the field-value
and consisting of either *TEXT or combinations
of token, tspecials, and quoted-string>
The order in which header fields are received is not significant. However, it is "good practice"
to send General-Header fields first, followed by Request-Header or Response-Header fields prior
to the Entity-Header fields.
Multiple HTTP-header fields with the same field-name may be present in a message if and only
if the entire field-value for that header field is defined as a comma-separated list [i.e., #(values)].
It must be possible to combine the multiple header fields into one "field-name: field-value" pair,
without changing the semantics of the message, by appending each subsequent field-value to
the first, each separated by a comma.
General-Header = Date ; Section 10.6
| Pragma ; Section 10.12
General header field names can be extended reliably only in combination with a change in the
protocol version. However, new or experimental header fields may be given the semantics of
general header fields if all parties in the communication recognize them to be general header
fields. Unrecognized header fields are treated as Entity-Header fields.
Request = Simple-Request | Full-Request
Simple-Request = "GET" SP Request-URI CRLF
Full-Request = Request-Line ; Section 5.1
*( General-Header ; Section 4.3
| Request-Header ; Section 5.2
| Entity-Header ) ; Section 7.1
CRLF
[ Entity-Body ] ; Section 7.2
If an HTTP/1.0 server receives a Simple-Request, it must respond with an HTTP/0.9
Simple-Response. An HTTP/1.0 client capable of receiving a Full-Response should never
generate a Simple-Request.
Request-Line begins with a method token, followed by the Request-URI and the protocol
version, and ending with CRLF. The elements are separated by SP characters.
No CR or LF are allowed except in the final CRLF sequence.
Request-Line = Method SP Request-URI SP HTTP-Version CRLF
Note that the difference between a Simple-Request and the Request-Line of a Full-Request is the
presence of the HTTP-Version field and the availability of methods other than GET.
Method token indicates the method to be performed on the resource identified by the
Request-URI. The method is case-sensitive.
Method = "GET" ; Section 8.1
| "HEAD" ; Section 8.2
| "POST" ; Section 8.3
| extension-method
extension-method = token
The list of methods acceptable by a specific resource can change dynamically; the client is
notified through the return code of the response if a method is not allowed on a resource.
Servers should return the status code 501 (not implemented) if the method is unrecognized or
not implemented.
The methods commonly used by HTTP/1.0 applications are fully defined in Section 8.
Request-URI is a Uniform Resource Identifier (Section 3.2) and identifies the resource upon
which to apply the request.
Request-URI = absoluteURI | abs_path
The two options for Request-URI are dependent on the nature of the request.
The absoluteURI form is only allowed when the request is being made to a proxy. The proxy is
requested to forward the request and return the response. If the request is GET or HEAD and a
prior response is cached, the proxy may use the cached message if it passes any restrictions in
the Expires header field. Note that the proxy may forward the request on to another proxy or
directly to the server specified by the absoluteURI. In order to avoid request loops, a proxy must
be able to recognize all of its server names, including any aliases, local variations, and the
numeric IP address. An example Request-Line would be:
GET /TheProject.html HTTP/1.0
The most common form of Request-URI is that used to identify a resource on an origin server
or gateway. In this case, only the absolute path of the URI is transmitted (see Section 3.2.1,
abs_path). For example, a client wishing to retrieve the resource above directly from the origin
server would create a TCP connection to port 80 of the host "www.w3.org" and send the line:
GET /pub/WWW/TheProject.html HTTP/1.0
followed by the remainder of the Full-Request. Note that the absolute path cannot be empty; if
none is present in the original URI, it must be given as "/" (the server root).
The Request-URI is transmitted as an encoded string, where some characters may be escaped
using the "% HEX HEX" encoding defined by RFC 1738 [4]. The origin server must decode
the Request-URI in order to properly interpret the request.
Request-Header = Authorization ; Section 10.2
| From ; Section 10.8
| If-Modified-Since ; Section 10.9
| Referer ; Section 10.13
| User-Agent ; Section 10.15
Request-Header field names can be extended reliably only in combination with a change in the
protocol version. However, new or experimental header fields may be given the semantics of
request header fields if all parties in the communication recognize them to be request header
fields. Unrecognized header fields are treated as Entity-Header fields.
Response = Simple-Response | Full-Response
Simple-Response = [ Entity-Body ]
Full-Response = Status-Line ; Section 6.1
*( General-Header ; Section 4.3
| Response-Header ; Section 6.2
| Entity-Header ) ; Section 7.1
CRLF
[ Entity-Body ] ; Section 7.2
A Simple-Response should only be sent in response to an HTTP/0.9 Simple-Request or if the
server only supports the more limited HTTP/0.9 protocol. If a client sends an HTTP/1.0
Full-Request and receives a response that does not begin with a Status-Line, it should assume that
the response is a Simple-Response and parse it accordingly. Note that the Simple-Response
consists only of the entity body and is terminated by the server closing the connection.
Full-Response message is the Status-Line, consisting of the protocol version
followed by a numeric status code and its associated textual phrase, with each element
separated by SP characters. No CR or LF is allowed except in the final CRLF sequence.
Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF
Since a status line always begins with the protocol version and status code
"HTTP/" 1*DIGIT "." 1*DIGIT SP 3DIGIT SP
(e.g., "HTTP/1.0 200 "), the presence of that expression is sufficient to differentiate a
Full-Response from a Simple-Response. Although the Simple-Response format may allow such
an expression to occur at the beginning of an entity body, and thus cause a misinterpretation of
the message if it was given in response to a Full-Request, most HTTP/0.9 servers are limited to
responses of type "text/html" and therefore would never generate such a response.
Status-Code element is a 3-digit integer result code of the attempt to understand and satisfy
the request. The Reason-Phrase is intended to give a short textual description of the Status-Code.
The Status-Code is intended for use by automata and the Reason-Phrase is intended for the
human user. The client is not required to examine or display the Reason-Phrase.
The first digit of the Status-Code defines the class of response. The last two digits do not have
any categorization role. There are 5 values for the first digit:
Reason-Phrase's, are presented below. The reason phrases listed here are only
recommended -- they may be replaced by local equivalents without affecting the protocol.
These codes are fully defined in Section 9.
Status-Code = "200" ; OK
| "201" ; Created
| "202" ; Accepted
| "204" ; No Content
| "301" ; Moved Permanently
| "302" ; Moved Temporarily
| "304" ; Not Modified
| "400" ; Bad Request
| "401" ; Unauthorized
| "403" ; Forbidden
| "404" ; Not Found
| "500" ; Internal Server Error
| "501" ; Not Implemented
| "502" ; Bad Gateway
| "503" ; Service Unavailable
| extension-code
extension-code = 3DIGIT
Reason-Phrase = *<TEXT, excluding CR, LF>
HTTP status codes are extensible, but the above codes are the only ones generally recognized
in current practice. HTTP applications are not required to understand the meaning of all
registered status codes, though such understanding is obviously desirable. However,
applications must understand the class of any status code, as indicated by the first digit, and
treat any unrecognized response as being equivalent to the x00 status code of that class, with
the exception that an unrecognized response must not be cached. For example, if an
unrecognized status code of 431 is received by the client, it can safely assume that there was
something wrong with its request and treat the response as if it had received a 400 status code.
In such cases, user agents should present to the user the entity returned with the response, since
that entity is likely to include human-readable information which will explain the unusual
status.
Status-Line. These header fields give information about the server
and about further access to the resource identified by the Request-URI.
Response-Header = Location ; Section 10.11
| Server ; Section 10.14
| WWW-Authenticate ; Section 10.16
Response-Header field names can be extended reliably only in combination with a change in the
protocol version. However, new or experimental header fields may be given the semantics of
response header fields if all parties in the communication recognize them to be response header
fields. Unrecognized header fields are treated as Entity-Header fields.
Full-Request and Full-Response messages may transfer an entity within some requests and
responses. An entity consists of Entity-Header fields and (usually) an Entity-Body. In this section,
both sender and recipient refer to either the client or the server, depending on who sends and
who receives the entity.
Entity-Header fields define optional metainformation about the Entity-Body or, if no body is
present, about the resource identified by the request.
Entity-Header = Allow ; Section 10.1
| Content-Encoding ; Section 10.3
| Content-Length ; Section 10.4
| Content-Type ; Section 10.5
| Expires ; Section 10.7
| Last-Modified ; Section 10.10
| extension-header
extension-header = HTTP-header
The extension-header mechanism allows additional Entity-Header fields to be defined without
changing the protocol, but these fields cannot be assumed to be recognizable by the recipient.
Unrecognized header fields should be ignored by the recipient and forwarded by proxies.
Entity-Header fields.
Entity-Body = *OCTET
An entity body is included with a request message only when the request method calls for one.
The presence of an entity body in a request is signaled by the inclusion of a Content-Length
header field in the request message headers. HTTP/1.0 requests containing an entity body must
include a valid Content-Length header field.
For response messages, whether or not an entity body is included with a message is dependent
on both the request method and the response code. All responses to the HEAD request method
must not include a body, even though the presence of entity header fields may lead one to
believe they do. All 1xx (informational), 204 (no content), and 304 (not modified) responses
must not include a body. All other responses must include an entity body or a Content-Length
header field defined with a value of zero (0).
Entity-Body is included with a message, the data type of that body is determined via
the header fields Content-Type and Content-Encoding. These define a two-layer, ordered
encoding model:
entity-body := Content-Encoding( Content-Type( data ) )
A Content-Type specifies the media type of the underlying data. A Content-Encoding may be used
to indicate any additional content coding applied to the type, usually for the purpose of data
compression, that is a property of the resource requested. The default for the content encoding
is none (i.e., the identity function).
Any HTTP/1.0 message containing an entity body should include a Content-Type header field
defining the media type of that body. If and only if the media type is not given by a Content-Type
header, as is the case for Simple-Response messages, the recipient may attempt to guess the
media type via inspection of its content and/or the name extension(s) of the URL used to
identify the resource. If the media type remains unknown, the recipient should treat it as type
"application/octet-stream".
Entity-Body is included with a message, the length of that body may be determined in
one of two ways. If a Content-Length header field is present, its value in bytes represents the
length of the Entity-Body. Otherwise, the body length is determined by the closing of the
connection by the server.
Closing the connection cannot be used to indicate the end of a request body, since it leaves no
possibility for the server to send back a response. Therefore, HTTP/1.0 requests containing an
entity body must include a valid Content-Length header field. If a request contains an entity body
and Content-Length is not specified, and the server does not recognize or cannot calculate the
length from other fields, then the server should send a 400 (bad request) response.
Note: Some older servers supply an invalid Content-Length when sending a document that contains server-side includes dynamically inserted into the data stream. It must be emphasized that this will not be tolerated by future versions of HTTP. Unless the client knows that it is receiving a response from a compliant server, it should not depend on the Content-Length value being correct.
GET method means retrieve whatever information (in the form of an entity) is identified by
the Request-URI. If the Request-URI refers to a data-producing process, it is the produced data
which shall be returned as the entity in the response and not the source text of the process,
unless that text happens to be the output of the process.
The semantics of the GET method changes to a "conditional GET" if the request message
includes an If-Modified-Since header field. A conditional GET method requests that the identified
resource be transferred only if it has been modified since the date given by the If-Modified-Since
header, as described in Section 10.9. The conditional GET method is intended to reduce
network usage by allowing cached entities to be refreshed without requiring multiple requests
or transferring unnecessary data.
HEAD method is identical to GET except that the server must not return any Entity-Body in
the response. The metainformation contained in the HTTP headers in response to a HEAD
request should be identical to the information sent in response to a GET request. This method
can be used for obtaining metainformation about the resource identified by the Request-URI
without transferring the Entity-Body itself. This method is often used for testing hypertext links
for validity, accessibility, and recent modification.
There is no "conditional HEAD" request analogous to the conditional GET. If an If-Modified-Since
header field is included with a HEAD request, it should be ignored.
POST method is used to request that the destination server accept the entity enclosed in the
request as a new subordinate of the resource identified by the Request-URI in the Request-Line.
POST is designed to allow a uniform method to cover the following functions:
POST method is determined by the server and is usually
dependent on the Request-URI. The posted entity is subordinate to that URI in the same way
that a file is subordinate to a directory containing it, a news article is subordinate to a
newsgroup to which it is posted, or a record is subordinate to a database.
A successful POST does not require that the entity be created as a resource on the origin server
or made accessible for future reference. That is, the action performed by the POST method
might not result in a resource that can be identified by a URI. In this case, either 200 (ok) or
204 (no content) is the appropriate response status, depending on whether or not the response
includes an entity that describes the result.
If a resource has been created on the origin server, the response should be 201 (created) and contain an entity (preferably of type "text/html") which describes the status of the request and refers to the new resource.
A valid Content-Length is required on all HTTP/1.0 POST requests. An HTTP/1.0 server should
respond with a 400 (bad request) message if it cannot determine the length of the request
message's content.
Applications must not cache responses to a POST request because the application has no way of knowing that the server would return an equivalent response on some future request.
Status-Code is described below, including a description of which method(s) it can follow
and any metainformation required in the response.
Status-Line and
optional headers, and is terminated by an empty line. HTTP/1.0 does not define any 1xx status
codes and they are not a valid response to a HTTP/1.0 request. However, they may be useful
for experimental applications which are outside the scope of this specification.
GET
HEAD
Entity-Body;
POST
Status-Code. If the action cannot be carried
out immediately, the server must include in the response body a description of when the
resource will be available; otherwise, the server should respond with 202 (accepted).
Of the methods defined by this specification, only POST can create a resource.
The 202 response is intentionally non-committal. Its purpose is to allow a server to accept a request for some other process (perhaps a batch-oriented process that is only run once per day) without requiring that the user agent's connection to the server persist until the process is completed. The entity returned with this response should include an indication of the request's current status and either a pointer to a status monitor or some estimate of when the user can expect the request to be fulfilled.
GET or
HEAD. A user agent should never automatically redirect a request more than 5 times, since such
redirections usually indicate an infinite loop.
The requested resource is available at one or more locations. Unless it was a HEAD request, the
response should include an entity containing a list of resource characteristics and locations
from which the user or user agent can choose the one most appropriate. If the server has a
preferred choice, it should include the URL in a Location field; user agents may use this field
value for automatic redirection.
Request-URI to the new reference returned by the server,
where possible.
The new URL must be given by the Location field in the response. Unless it was a HEAD request,
the Entity-Body of the response should contain a short note with a hyperlink to the new URL.
If the 301 status code is received in response to a request using the POST method, the user agent
must not automatically redirect the request unless it can be confirmed by the user, since this
might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after receiving a 301 status code, some existing user agents will erroneously change it into a GET request.
Request-URI for future requests.
The URL must be given by the Location field in the response. Unless it was a HEAD request, the
Entity-Body of the response should contain a short note with a hyperlink to the new URI(s).
If the 302 status code is received in response to a request using the POST method, the user agent
must not automatically redirect the request unless it can be confirmed by the user, since this
might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after receiving a 302 status code, some existing user agents will erroneously change it into a GET request.
GET request and access is allowed, but the document
has not been modified since the date and time specified in the If-Modified-Since field, the server
must respond with this status code and not send an Entity-Body to the client. Header fields
contained in the response should only include information which is relevant to cache managers
or which may have changed independently of the entity's Last-Modified date. Examples of
relevant header fields include: Date, Server, and Expires. A cache should update its cached entity
to reflect any new field values given in the 304 response.
HEAD request, the server should
include an entity containing an explanation of the error situation, and whether it is a temporary
or permanent condition. These status codes are applicable to any request method.
Note: If the client is sending data, server implementations on TCP should be careful to ensure that the client acknowledges receipt of the packet(s) containing the response prior to closing the input connection. If the client continues sending data to the server after the close, the server's controller will send a reset packet to the client, which may erase the client's unacknowledged input buffers before they can be read and interpreted by the HTTP application.
WWW-Authenticate
header field (Section 10.16) containing a challenge applicable to the requested resource. The
client may repeat the request with a suitable Authorization header field (Section 10.2). If the
request already included Authorization credentials, then the 401 response indicates that
authorization has been refused for those credentials. If the 401 response contains the same
challenge as the prior response, and the user agent has already attempted authentication at least
once, then the user should be presented the entity that was given in the response, since that
entity may include relevant diagnostic information. HTTP access authentication is explained
in Section 11.
HEAD and the server wishes
to make public why the request has not been fulfilled, it should describe the reason for the
refusal in the entity body. This status code is commonly used when the server does not wish to
reveal exactly why the request has been refused, or when no other response is applicable.
Request-URI. No indication is given of whether
the condition is temporary or permanent. If the server does not wish to make this information
available to the client, the status code 403 (forbidden) can be used instead.
HEAD request, the server should include an entity containing an
explanation of the error situation, and whether it is a temporary or permanent condition. These
response codes are applicable to any request method and there are no required header fields.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Allow entity-header field lists the set of methods supported by the resource identified by the
Request-URI. The purpose of this field is strictly to inform the recipient of valid methods
associated with the resource. The Allow header field is not permitted in a request using the POST
method, and thus should be ignored if it is received as part of a POST entity.
Allow = "Allow" ":" 1#method
Example of use:
Allow: GET, HEAD
This field cannot prevent a client from trying other methods. However, the indications given by
the Allow header field value should be followed. The actual set of allowed methods is defined
by the origin server at the time of each request.
A proxy must not modify the Allow header field even if it does not understand all the methods
specified, since the user agent may have other means of communicating with the origin server.
The Allow header field does not indicate what methods are implemented by the server.
Authorization request-header field with
the request. The Authorization field value consists of credentials containing the authentication
information of the user agent for the realm of the resource being requested.
Authorization = "Authorization" ":" credentials
HTTP access authentication is described in Section 11. If a request is authenticated and a realm
specified, the same credentials should be valid for all other requests within this realm.
Responses to requests containing an Authorization field are not cachable.
Content-Encoding entity-header field is used as a modifier to the media-type. When present,
its value indicates what additional content coding has been applied to the resource, and thus
what decoding mechanism must be applied in order to obtain the media-type referenced by the
Content-Type header field. The Content-Encoding is primarily used to allow a document to be
compressed without losing the identity of its underlying media type.
Content-Encoding = "Content-Encoding" ":" content-coding
Content codings are defined in Section 3.5. An example of its use is
Content-Encoding: x-gzip
The Content-Encoding is a characteristic of the resource identified by the Request-URI. Typically,
the resource is stored with this encoding and is only decoded before rendering or analogous
usage.
Content-Length entity-header field indicates the size of the Entity-Body, in decimal number
of octets, sent to the recipient or, in the case of the HEAD method, the size of the Entity-Body that
would have been sent had the request been a GET.
Content-Length = "Content-Length" ":" 1*DIGIT
An example is
Content-Length: 3495
Applications should use this field to indicate the size of the Entity-Body to be transferred,
regardless of the media type of the entity. A valid Content-Length field value is required on all
HTTP/1.0 request messages containing an entity body.
Any Content-Length greater than or equal to zero is a valid value. Section 7.2.2 describes how
to determine the length of a response entity body if a Content-Length is not given.
Note: The meaning of this field is significantly different from the corresponding definition in MIME, where it is an optional field used within the "message/external-body" content-type. In HTTP, it should be used whenever the entity's length can be determined prior to being transferred.
Content-Type entity-header field indicates the media type of the Entity-Body sent to the
recipient or, in the case of the HEAD method, the media type that would have been sent had the
request been a GET.
Content-Type = "Content-Type" ":" media-type
Media types are defined in Section 3.6. An example of the field is
Content-Type: text/html
Further discussion of methods for identifying the media type of an entity is provided in
Section 7.2.1.
Date general-header field represents the date and time at which the message was originated,
having the same semantics as orig-date in RFC 822. The field value is an HTTP-date, as
described in Section 3.3.
Date = "Date" ":" HTTP-date
An example is
Date: Tue, 15 Nov 1994 08:12:31 GMT
If a message is received via direct connection with the user agent (in the case of requests) or
the origin server (in the case of responses), then the date can be assumed to be the current date
at the receiving end. However, since the date--as it is believed by the origin--is important for
evaluating cached responses, origin servers should always include a Date header. Clients should
only send a Date header field in messages that include an entity body, as in the case of the POST
request, and even then it is optional. A received message which does not have a Date header
field should be assigned one by the recipient if the message will be cached by that recipient or
gatewayed via a protocol which requires a Date.
In theory, the date should represent the moment just before the entity is generated. In practice, the date can be generated at any time during the message origination without affecting its semantic value.
Note: An earlier version of this document incorrectly specified that this field should
contain the creation date of the enclosed Entity-Body. This has been changed to reflect
actual (and proper) usage.
Expires entity-header field gives the date/time after which the entity should be considered
stale. This allows information providers to suggest the volatility of the resource, or a date after
which the information may no longer be valid. Applications must not cache this entity beyond
the date given. The presence of an Expires field does not imply that the original resource will
change or cease to exist at, before, or after that time. However, information providers that know
or even suspect that a resource will change by a certain date should include an Expires header
with that date. The format is an absolute date and time as defined by HTTP-date in Section 3.3.
Expires = "Expires" ":" HTTP-date
An example of its use is
Expires: Thu, 01 Dec 1994 16:00:00 GMT
If the date given is equal to or earlier than the value of the Date header, the recipient must not
cache the enclosed entity. If a resource is dynamic by nature, as is the case with many
data-producing processes, entities from that resource should be given an appropriate Expires
value which reflects that dynamism.
The Expires field cannot be used to force a user agent to refresh its display or reload a resource; its semantics apply only to caching mechanisms, and such mechanisms need only check a resource's expiration status when a new request for that resource is initiated.
User agents often have history mechanisms, such as "Back" buttons and history lists, which can
be used to redisplay an entity retrieved earlier in a session. By default, the Expires field does not
apply to history mechanisms. If the entity is still in storage, a history mechanism should display
it even if the entity has expired, unless the user has specifically configured the agent to refresh
expired history documents.
Note: Applications are encouraged to be tolerant of bad or misinformed implementations of the Expires header. A value of zero (0) or an invalid date format should be considered equivalent to an "expires immediately." Although these values are not legitimate for HTTP/1.0, a robust implementation is always desirable.
From request-header field, if given, should contain an Internet e-mail address for the human
user who controls the requesting user agent. The address should be machine-usable, as defined
by mailbox in RFC 822 [7] (as updated by RFC 1123 [6]):
From = "From" ":" mailbox
An example is:
From: webmaster@w3.org
This header field may be used for logging purposes and as a means for identifying the source
of invalid or unwanted requests. It should not be used as an insecure form of access protection.
The interpretation of this field is that the request is being performed on behalf of the person
given, who accepts responsibility for the method performed. In particular, robot agents should
include this header so that the person responsible for running the robot can be contacted if
problems occur on the receiving end.
The Internet e-mail address in this field may be separate from the Internet host which issued the request. For example, when a request is passed through a proxy, the original issuer's address should be used.
Note: The client should not send the From header field without the user's approval, as
it may conflict with the user's privacy interests or their site's security policy. It is
strongly recommended that the user be able to disable, enable, and modify the value
of this field at any time prior to a request.
If-Modified-Since request-header field is used with the GET method to make it conditional:
if the requested resource has not been modified since the time specified in this field, a copy of
the resource will not be returned from the server; instead, a 304 (not modified) response will
be returned without any Entity-Body.
If-Modified-Since = "If-Modified-Since" ":" HTTP-date
An example of the field is:
If-Modified-Since: Sat, 29 Oct 1994 19:43:31 GMT
A conditional GET method requests that the identified resource be transferred only if it has been
modified since the date given by the If-Modified-Since header. The algorithm for determining this
includes the following cases:
If-Modified-Since date is invalid, the response is exactly the same as for a
normal GET. A date which is later than the server's current time is invalid.
If-Modified-Since date, the response is
exactly the same as for a normal GET.
If-Modified-Since date, the server
shall return a 304 (not modified) response.
Last-Modified entity-header field indicates the date and time at which the sender believes
the resource was last modified. The exact semantics of this field are defined in terms of how the
recipient should interpret it: if the recipient has a copy of this resource which is older than the
date given by the Last-Modified field, that copy should be considered stale.
Last-Modified = "Last-Modified" ":" HTTP-date
An example of its use is
Last-Modified: Tue, 15 Nov 1994 12:45:26 GMT
The exact meaning of this header field depends on the implementation of the sender and the
nature of the original resource. For files, it may be just the file system last-modified time. For
entities with dynamically included parts, it may be the most recent of the set of last-modify
times for its component parts. For database gateways, it may be the last-update timestamp of
the record. For virtual objects, it may be the last time the internal state changed.
An origin server must not send a Last-Modified date which is later than the server's time of message origination. In such cases, where the resource's last modification would indicate some time in the future, the server must replace that date with the message origination date.
Request-URI. For 3xx responses, the location must indicate the server's preferred URL
for automatic redirection to the resource. Only one absolute URL is allowed.
Location = "Location" ":" absoluteURI
An example is
Location: http://www.w3.org/hypertext/WWW/NewLocation.html
Pragma general-header field is used to include implementation-specific directives that may
apply to any recipient along the request/response chain. All pragma directives specify optional
behavior from the viewpoint of the protocol; however, some systems may require that behavior
be consistent with the directives.
Pragma = "Pragma" ":" 1#pragma-directive
pragma-directive = "no-cache" | extension-pragma
extension-pragma = token [ "=" word ]
When the "no-cache" directive is present in a request message, an application should forward
the request toward the origin server even if it has a cached copy of what is being requested. This
allows a client to insist upon receiving an authoritative response to its request. It also allows a
client to refresh a cached copy which is known to be corrupted or stale.
Pragma directives must be passed through by a proxy or gateway application, regardless of their significance to that application, since the directives may be applicable to all recipients along the request/response chain. It is not possible to specify a pragma for a specific recipient; however, any pragma directive not relevant to a recipient should be ignored by that recipient.
Referer request-header field allows the client to specify, for the server's benefit, the address
(URI) of the resource from which the Request-URI was obtained. This allows a server to
generate lists of back-links to resources for interest, logging, optimized caching, etc. It also
allows obsolete or mistyped links to be traced for maintenance. The Referer field must not be
sent if the Request-URI was obtained from a source that does not have its own URI, such as input
from the user keyboard.
Referer = "Referer" ":" ( absoluteURI | relativeURI )
Example:
Referer: http://www.w3.org/hypertext/DataSources/Overview.html
If a partial URI is given, it should be interpreted relative to the Request-URI. The URI must not
include a fragment.
Note: Because the source of a link may be private information or may reveal an otherwise private information source, it is strongly recommended that the user be able to select whether or not theRefererfield is sent. For example, a browser client could have a toggle switch for browsing openly/anonymously, which would respectively enable/disable the sending ofRefererandFrominformation.
Server response-header field contains information about the software used by the origin
server to handle the request. The field can contain multiple product tokens (Section 3.7) and
comments identifying the server and any significant subproducts. By convention, the product
tokens are listed in order of their significance for identifying the application.
Server = "Server" ":" 1*( product | comment )
Example:
Server: CERN/3.0 libwww/2.17
If the response is being forwarded through a proxy, the proxy application must not add its data
to the product list.
Note: Revealing the specific software version of the server may allow the server machine to become more vulnerable to attacks against software that is known to contain security holes. Server implementors are encouraged to make this field a configurable option.
Note: Some existing servers fail to restrict themselves to the product token syntax within the Server field.
User-Agent request-header field contains information about the user agent originating the
request. This is for statistical purposes, the tracing of protocol violations, and automated
recognition of user agents for the sake of tailoring responses to avoid particular user agent
limitations. Although it is not required, user agents should include this field with requests. The
field can contain multiple product tokens (Section 3.7) and comments identifying the agent and
any subproducts which form a significant part of the user agent. By convention, the product
tokens are listed in order of their significance for identifying the application.
User-Agent = "User-Agent" ":" 1*( product | comment )
Example:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3
Note: Some current proxy applications append their product information to the list in the User-Agent field. This is not recommended, since it makes machine interpretation of these fields ambiguous.
Note: Some existing clients fail to restrict themselves to the product token syntax within the User-Agent field.
WWW-Authenticate response-header field must be included in 401 (unauthorized) response
messages. The field value consists of at least one challenge that indicates the authentication
scheme(s) and parameters applicable to the Request-URI.
WWW-Authenticate = "WWW-Authenticate" ":" 1#challenge
The HTTP access authentication process is described in Section 11. User agents must take
special care in parsing the WWW-Authenticate field value if it contains more than one challenge,
or if more than one WWW-Authenticate header field is provided, since the contents of a challenge
may itself contain a comma-separated list of authentication parameters.
auth-scheme = token
auth-param = token "=" quoted-string
The 401 (unauthorized) response message is used by an origin server to challenge the
authorization of a user agent. This response must include a WWW-Authenticate header field
containing at least one challenge applicable to the requested resource.
challenge = auth-scheme 1*SP realm *( "," auth-param )
realm = "realm" "=" realm-value
realm-value = quoted-string
The realm attribute (case-insensitive) is required for all authentication schemes which issue a
challenge. The realm value (case-sensitive), in combination with the canonical root URL of the
server being accessed, defines the protection space. These realms allow the protected resources
on a server to be partitioned into a set of protection spaces, each with its own authentication
scheme and/or authorization database. The realm value is a string, generally assigned by the
origin server, which may have additional semantics specific to the authentication scheme.
A user agent that wishes to authenticate itself with a server--usually, but not necessarily, after
receiving a 401 response--may do so by including an Authorization header field with the
request. The Authorization field value consists of credentials containing the authentication
information of the user agent for the realm of the resource being requested.
credentials = basic-credentials
| ( auth-scheme #auth-param )
The domain over which credentials can be automatically applied by a user agent is determined
by the protection space. If a prior request has been authorized, the same credentials may be
reused for all other requests within that protection space for a period of time determined by the
authentication scheme, parameters, and/or user preference. Unless otherwise defined by the
authentication scheme, a single protection space cannot extend outside the scope of its server.
If the server does not wish to accept the credentials sent with a request, it should return a 403 (forbidden) response.
The HTTP protocol does not restrict applications to this simple challenge-response mechanism for access authentication. Additional mechanisms may be used, such as encryption at the transport level or via message encapsulation, and with additional header fields specifying authentication information. However, these additional mechanisms are not defined by this specification.
Proxies must be completely transparent regarding user agent authentication. That is, they must
forward the WWW-Authenticate and Authorization headers untouched, and must not cache the
response to a request containing Authorization. HTTP/1.0 does not provide a means for a client
to be authenticated with a proxy.
Request-URI. There are no optional authentication parameters.
Upon receipt of an unauthorized request for a URI within the protection space, the server should respond with a challenge like the following:
WWW-Authenticate: Basic realm="WallyWorld"
where "WallyWorld" is the string assigned by the server to identify the protection space of the
Request-URI.
To receive authorization, the client sends the user-ID and password, separated by a single colon
(":") character, within a base64 [5] encoded string in the credentials.
basic-credentials = "Basic" SP basic-cookie
basic-cookie = <base64 [5] encoding of userid-password,
except not limited to 76 char/line>
userid-password = [ token ] ":" *TEXT
If the user agent wishes to send the user-ID "Aladdin" and password "open sesame", it would
use the following header field:
Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==
The basic authentication scheme is a non-secure method of filtering unauthorized access to
resources on an HTTP server. It is based on the assumption that the connection between the
client and the server can be regarded as a trusted carrier. As this is not generally true on an open
network, the basic authentication scheme should be used accordingly. In spite of this, clients
should implement the scheme in order to communicate with servers that use it.
Entity-Body from being transmitted in clear text across the
physical network used as the carrier. HTTP/1.0 does not prevent additional authentication
schemes and encryption mechanisms from being employed to increase security.
In particular, the convention has been established that the GET and HEAD methods should never
have the significance of taking an action other than retrieval. These methods should be
considered "safe." This allows user agents to represent other methods, such as POST, in a
special way, so that the user is made aware of the fact that a possibly unsafe action is being
requested.
Naturally, it is not possible to ensure that the server does not generate side-effects as a result of
performing a GET request; in fact, some dynamic resources consider that a feature. The
important distinction here is that the user did not request the side-effects, so therefore cannot
be held accountable for them.
Server, Referer and From.
Revealing the specific software version of the server may allow the server machine to become
more vulnerable to attacks against software that is known to contain security holes.
Implementors should make the Server header field a configurable option.
The Referer field allows reading patterns to be studied and reverse links drawn. Although it can
be very useful, its power can be abused if user details are not separated from the information
contained in the Referer. Even when the personal information has been removed, the Referer
field may indicate a private document's URI whose publication would be inappropriate.
The information sent in the From field might conflict with the user's privacy interests or their
site's security policy, and hence it should not be transmitted without the user being able to
disable, enable, and modify the contents of the field. The user must be able to set the contents
of this field within a user preference or application defaults configuration.
We suggest, though do not require, that a convenient toggle interface be provided for the user
to enable or disable the sending of From and Referer information.
Request-URI if it would otherwise allow access to a resource outside those
intended to be accessible via the HTTP server. Similarly, files intended for reference only
internally to the server (such as access control files, configuration files, and script code) must
be protected from inappropriate retrieval, since they might contain sensitive information.
Experience has shown that minor bugs in such HTTP server implementations have turned into
security risks.
The HTTP protocol has evolved considerably over the past four years. It has benefited from a large and active developer community--the many people who have participated on the www-talk mailing list--and it is that community which has been most responsible for the success of HTTP and of the World-Wide Web in general. Marc Andreessen, Robert Cailliau, Daniel W. Connolly, Bob Denny, Jean-Francois Groff, Phillip M. Hallam-Baker, Håkon W. Lie, Ari Luotonen, Rob McCool, Lou Montulli, Dave Raggett, Tony Sanders, and Marc VanHeyningen deserve special recognition for their efforts in defining aspects of the protocol for early versions of this specification.
Paul Hoffman contributed sections regarding the informational status of this document and Appendices C and D.
This document has benefited greatly from the comments of all those participating in the HTTP-WG. In addition to those already mentioned, the following individuals have contributed to this specification:
Gary Adams Harald Tveit Alvestrand
Keith Ball Brian Behlendorf
Paul Burchard Maurizio Codogno
Mike Cowlishaw Roman Czyborra
Michael A. Dolan John Franks
Jim Gettys Marc Hedlund
Koen Holtman Alex Hopmann
Bob Jernigan Shel Kaphan
Martijn Koster Dave Kristol
Daniel LaLiberte Paul Leach
Albert Lunde John C. Mallery
Larry Masinter Mitra
Jeffrey Mogul Gavin Nicol
Bill Perry Jeffrey Perry
Owen Rees Luigi Rizzo
David Robinson Marc Salomon
Rich Salz Jim Seidman
Chuck Shotton Eric W. Sink
Simon E. Spero Robert S. Thau
François Yergeau Mary Ellen Zurko
Jean-Philippe Martin-Flatin
Roy T. Fielding
Department of Information and Computer Science
University of California
Irvine, CA 92717-3425, U.S.A.
Fax: +1 (714) 824-4056
Email: fielding@ics.uci.edu
Henrik Frystyk Nielsen
W3 Consortium
MIT Laboratory for Computer Science
545 Technology Square
Cambridge, MA 02139, U.S.A.
Fax: +1 (617) 258 8682
Email: frystyk@w3.org
Media Type name: message
Media subtype name: http
Required parameters: none
Optional parameters: version, msgtype
version: The HTTP-Version number of the enclosed message
(e.g., "1.0"). If not present, the version can be
determined from the first line of the body.
msgtype: The message type -- "request" or "response". If not
present, the type can be determined from the first
line of the body.
Encoding considerations: only "7bit", "8bit", or "binary" are
permitted
Security considerations: none
Clients should be tolerant in parsing the Status-Line and servers tolerant when parsing the
Request-Line. In particular, they should accept any amount of SP or HT characters between
fields, even though only a single SP is required.
The line terminator for HTTP-header fields is the sequence CRLF. However, we recommend that
applications, when parsing such headers, recognize a single LF as a line terminator and ignore
the leading CR.
At the time of this writing, it is expected that RFC 1521 will be revised. The revisions may include some of the practices found in HTTP/1.0 but not in RFC 1521.
This appendix describes specific areas where HTTP differs from RFC 1521. Proxies and gateways to strict MIME environments should be aware of these differences and provide the appropriate conversions where necessary. Proxies and gateways from MIME environments to HTTP also need to be aware of the differences because some conversions may be required.
RFC 1521 requires that content with a Content-Type of "text" represent line breaks as CRLF and forbids the use of CR or LF outside of line break sequences. HTTP allows CRLF, bare CR, and bare LF to indicate a line break within text content when a message is transmitted over HTTP.
Where it is possible, a proxy or gateway from HTTP to a strict RFC 1521 environment should
translate all line breaks within the text media types described in Section 3.6.1 of this document
to the RFC 1521 canonical form of CRLF. Note, however, that this may be complicated by the
presence of a Content-Encoding and by the fact that HTTP allows the use of some character sets
which do not use octets 13 and 10 to represent CR and LF, as is the case for some multi-byte
character sets.
Date header
field present in a message conforms to one of the HTTP/1.0 formats and rewrite the date if
necessary.
Content-Encoding header
field. Since this acts as a modifier on the media type, proxies and gateways from HTTP to
MIME-compliant protocols must either change the value of the Content-Type header field or
decode the Entity-Body before forwarding the message. (Some experimental applications of
Content-Type for Internet mail have used a media-type parameter of
";conversions=<content-coding>" to perform an equivalent function as
Content-Encoding. However, this parameter is not part of RFC 1521.)
Proxies and gateways from HTTP to MIME-compliant protocols are responsible for ensuring that the message is in the correct format and encoding for safe transport on that protocol, where "safe transport" is defined by the limitations of the protocol being used. Such a proxy or gateway should label the data with an appropriate Content-Transfer-Encoding if doing so will improve the likelihood of safe transport over the destination protocol.
Request-URI. If
the Request-URI refers to an already existing resource, the enclosed entity should be considered
as a modified version of the one residing on the origin server. If the Request-URI does not point
to an existing resource, and that URI is capable of being defined as a new resource by the
requesting user agent, the origin server can create the resource with that URI.
The fundamental difference between the POST and PUT requests is reflected in the different
meaning of the Request-URI. The URI in a POST request identifies the resource that will handle
the enclosed entity as data to be processed. That resource may be a data-accepting process, a
gateway to some other protocol, or a separate entity that accepts annotations. In contrast, the
URI in a PUT request identifies the entity enclosed with the request -- the user agent knows
what URI is intended and the server should not apply the request to some other resource.
Request-URI.
Request-URI and other existing resources.
Request-URI.
Request-URI resource can be identified. There is no guarantee that
the resource can be accessed using the URI(s) specified.