Please refer to the errata for this document, which may include normative corrections.
See also translations.
Copyright © 2005 W3C® (MIT, ERCIM, Keio), All Rights Reserved. W3C liability, trademark and document use rules apply.
This document describes an abstract feature and a concrete implementation of it for optimizing the transmission and/or wire format of SOAP messages. The concrete implementation relies on the [XML-binary Optimized Packaging] format for carrying SOAP messages.
This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.
This document is a Recommendation of the W3C. It has been reviewed by W3C Members and other interested parties and has been endorsed by the Director as a W3C Recommendation. It is a stable document and may be used as reference material or cited as a normative reference from another document. W3C's role in making the Recommendation is to draw attention to the specification and to promote its widespread deployment. This enhances the functionality and interoperability of the Web.
This document has been produced by the XML Protocol Working Group (WG) as part of the W3C Web Services Activity. The English version of this specification is the only normative version. However, for translations of this document, see http://www.w3.org/2003/03/Translations/byTechnology?technology=soap12-mtom.
Please report errors in this document to xmlp-comments@w3.org (archive). The errata list for this edition is available at http://www.w3.org/2005/01/soap12-mtom-errata
This document is based upon the SOAP Message Transmission Optimization Mechanism Proposed Recommendation of 16 November 2004. Feedback received during that review resulted in no changes. Evidence of interoperation between at least two implementations of this specification are documented in the Implementation Summary. Changes between these two versions are described in a diff document.
This document has been produced under the 24 January 2002 CPP as amended by the W3C Patent Policy Transition Procedure. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) with respect to this specification should disclose the information in accordance with section 6 of the W3C Patent Policy. Patent disclosures relevant to this specification may be found on the Working Group's patent disclosure page.
A list of current W3C Recommendations and other technical documents can be found at http://www.w3.org/TR/.
1 Introduction
1.1 Notational Conventions
1.2 Relation to other specifications
2 Abstract SOAP Transmission Optimization Feature
2.1 Introduction
2.2 Abstract SOAP Transmission Optimization Feature Name
2.3 Abstract SOAP Transmission Optimization Feature Processing
2.3.1 Sending a message
2.3.2 Receiving a message
2.3.3 Intermediaries
2.3.4 Binding Optimizations at Intermediaries
3 An Optimized MIME Multipart/Related Serialization of SOAP
Messages
3.1 Introduction
3.2 Serialization of a SOAP message
3.3 Deserialization of a SOAP message
4 HTTP SOAP Transmission Optimization Feature
4.1 Introduction
4.2 HTTP SOAP Transmission Optimization Feature Name
4.3 Implementation
4.3.1 Sending a SOAP message
4.3.1.1 Init
4.3.2 Receiving a SOAP message
A References
B Acknowledgements (Non-Normative)
The first part of this document (2 Abstract SOAP Transmission Optimization Feature) describes an abstract feature for optimizing the transmission and/or wire format of a SOAP message ([SOAP Version 1.2 Part 1: Messaging Framework]) by selectively encoding portions of the message, while still presenting an XML Infoset to the SOAP application.
Use of the Abstract SOAP Transmission Optimization Feature is a hop-by-hop contract between a SOAP node and the next SOAP node in the SOAP message path, providing no mandatory convention for optimization of SOAP transmission through intermediaries. The feature does provide optional means by which binding implementations MAY choose to facilitate the efficient pass-through of optimized data contained within headers or bodies relayed by an intermediary (see 2.3.4 Binding Optimizations at Intermediaries). Additional specifications might also be written to provide for other optimized multi-hop capabilities, perhaps building on the mechanisms provided herein.
The second part (3 An Optimized MIME Multipart/Related Serialization of SOAP Messages) describes an Optimized MIME Multipart/Related Serialization of SOAP Messages implementing the Abstract SOAP Transmission Optimization Feature in a binding independent way. This implementation relies on the [XML-binary Optimized Packaging] format.
The third part (4 HTTP SOAP Transmission Optimization Feature) uses this Optimized MIME Multipart/Related Serialization of SOAP Messages for describing an implementation of the Abstract Transmission Optimization Feature for the SOAP 1.2 HTTP binding (see [SOAP Version 1.2 Part 2: Adjuncts] 7. SOAP HTTP Binding).
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC 2119].
This specification uses a number of namespace prefixes throughout; they are listed in [Prefixes and Namespaces used in this specification.]. Note that the choice of any namespace prefix is arbitrary and not semantically significant (see XML Infoset [XMLInfoSet]).
Prefix | Namespace |
---|---|
Notes | |
env | "http://www.w3.org/2003/05/soap-envelope" |
A normative XML Schema [XML Schema Part 1: Structures Second Edition], [XML Schema Part 2: Datatypes Second Edition] document for the "http://www.w3.org/2003/05/soap-envelope" namespace can be found at http://www.w3.org/2003/05/soap-envelope. | |
xop | "http://www.w3.org/2004/08/xop/include" |
A non-normative XML Schema [XML Schema Part 1: Structures Second Edition], [XML Schema Part 2: Datatypes Second Edition] document for the "http://www.w3.org/2004/08/xop/include" namespace can be found at http://www.w3.org/2004/08/xop/include. | |
rep | "http://www.w3.org/2004/08/representation" |
A normative XML Schema [XML Schema Part 1: Structures Second Edition], [XML Schema Part 2: Datatypes Second Edition] document for the "http://www.w3.org/2004/08/representation" namespace can be found at TBD. | |
xs | "http://www.w3.org/2001/XMLSchema" |
The namespace of XML Schema data types (see [XML Schema Part 2: Datatypes Second Edition]). |
The 4 HTTP SOAP Transmission Optimization Feature (which is an implementation of the 2 Abstract SOAP Transmission Optimization Feature for the SOAP 1.2 HTTP binding) is intended to enhance the SOAP HTTP binding described in [SOAP Version 1.2 Part 2: Adjuncts] 7. SOAP HTTP Binding or an updated version of it.
This document along with [XML-binary Optimized Packaging] and [SOAP Representation Header] has been produced in conjunction with the development of requirements embodied in the [W3C.soap-attachment-req] document.
The Abstract SOAP Transmission Optimization Feature enables SOAP bindings
to optimize the transmission and/or wire format of a SOAP message by
selectively encoding portions of the message, whilst still presenting
an XML Infoset to the SOAP application. Optimization is available
only for element content that is in a canonical lexical
representation of the xs:base64Binary
data type (see
[XML Schema Part 2: Datatypes Second Edition] 3.2.16
base64Binary).
Note: because there is a one-to-one correspondence between such
canonical forms and values in the value space of
xs:base64Binary
, MTOM implementations typically optimize
by transmitting a compact representation of the value in place of the
less compact character sequence. At the receiver, the character form
can be reconstructed if necessary.
Consistent with the requirement that a SOAP binding transmit the Envelope Infoset intact, implementations of this feature MUST NOT substitute canonical for non-canonical representations, or make other changes to optimized element content.
This Abstract SOAP Transmission Optimization Feature is identified by the URI:
"http://www.w3.org/2004/08/soap/features/abstract-optimization".
When sending a SOAP Message, if the Abstract Transmission
Optimization Feature is used in combination with the SOAP
Request-Response Message Exchange Pattern ([SOAP Version 1.2 Part 2: Adjuncts] 6.2
SOAP Request-Response Message Exchange Pattern) or the
SOAP Response Message Exchange Pattern ([SOAP Version 1.2 Part 2: Adjuncts] 6.3 SOAP
Response Message Exchange Pattern), the
http://www.w3.org/2003/05/soap/mep/OutboundMessage
property is the Infoset of the SOAP Message to be sent. Similar
rules should be applied for other MEPs, as appropriate.
The purpose of the Abstract SOAP Transmission Optimization Feature is to
optimize the transmission of base64 encoded data. To be optimized,
the characters comprising the [children] of an element
information item MUST be in the canonical form of
xs:base64Binary
(see [XML Schema Part 2: Datatypes Second Edition]
3.2.16
base64Binary) and MUST NOT contain any whitespace
characters, preceding, inline with or following the non-whitespace
content.
Note: the means of identifying element information
items that contain base64 encoded data in
canonical lexical form are implementation-dependent. Some
implementations can identify such element information
items by construction (e.g., because a certain API may
create only canonical forms); others may check the characters prior
to sending, others may rely on information in the description such
as the presence and/or value of the xmlmime:expectedMediaType
schema annotation (see [Assigning Media Types to Binary Data in XML]), if a schema is available.
Because of the need to exactly preserve the characters
in the transmitted Infoset, non-canonical representations MUST NOT
be optimized by implementations of this feature.
When receiving a SOAP message optimized using an implementation of the Abstract SOAP Transmission Optimization Feature, a SOAP node SHOULD generate a fault if it does not support the implementation used or the Abstract SOAP Transmission Optimization Feature.
Upon reception of an optimized SOAP message, the receiving node MUST reconstruct an Envelope Infoset from the optimized SOAP message. Then, the receiving node MUST perform SOAP processing on the reconstructed Infoset (see [SOAP Version 1.2 Part 1: Messaging Framework] 2. SOAP Processing Model). In all cases, the received Infoset MUST be exactly the same as that transmitted by the sender.
Implementations are free to reconstruct only those portions actually needed for processing, or to present information from the message in a form convenient for efficient processing. For example, a value sent in an optimized form (e.g., binary) MAY be made available in that form as well as in the base64 encoded character form.
When this feature is used in combination with the SOAP
Request-Response Message Exchange Pattern ([SOAP Version 1.2 Part 2: Adjuncts] 6.2
SOAP Request-Response Message Exchange Pattern) or the
SOAP Response Message Exchange Pattern ([SOAP Version 1.2 Part 2: Adjuncts] 6.3 SOAP
Response Message Exchange Pattern), the Infoset
contained in the
http://www.w3.org/2003/05/soap/mep/InboundMessage
property is the Infoset of the reconstructed SOAP Envelope. Similar
rules should be applied for other MEPs, as appropriate.
Use of the Abstract SOAP Transmission Optimization Feature is a hop-by-hop contract between a SOAP node and the next SOAP node in the SOAP message path. Therefore, no changes or restrictions to the SOAP processing model are introduced by this feature at an intermediary. The section 2.3.4 Binding Optimizations at Intermediaries details the means by which certain optimizations can be performed by bindings at intermediaries.
However a SOAP intermediary implementing the Abstract Transmission Optimization Feature MUST still follow the rules related to the usage of an implementation of the Abstract Transmission Optimization Feature when receiving the message (see 2.3.2 Receiving a message) and those related to the usage of an implementation of the Abstract SOAP Transmission Optimization Feature when sending the message (see 2.3.1 Sending a message). In particular, it MUST follow the rules for relaying SOAP messages (see [SOAP Version 1.2 Part 1: Messaging Framework] 2.7 Relaying SOAP Messages).
As described in [SOAP Version 1.2 Part 1: Messaging Framework] 2.7 Relaying SOAP Messages, a SOAP intermediary may be called upon to relay intact certain headers, or to reinsert headers identical to those received and removed for processing. Furthermore, many intermediaries will relay unmodified the contents of the SOAP body. In all these cases, portions of the relayed message have content identical to corresponding portions of the inbound message.
The Abstract SOAP Transmission Optimization Feature does not require any particular correspondence between the optimization of the inbound message and the outbound message, even when optimized portions of the inbound message are relayed intact, or reinserted in identical form in the envelope Infoset. Nonetheless, the implementations of the receiving binding and the binding used to transmit the relayed message MAY cooperate to provide efficient relay. For example, if the inbound and outbound binding use the same representation for optimized binary, the implementations MAY cooperate to pass the optimized form directly from the inbound to the outbound binding. The choice of whether to implement such cooperation, and if so the means used, is at the discretion of the binding specification(s) and/or the implementation of the bindings.
Note: a consequence of this architecture is that there are no invariant rules for the degree to which optimizations are preserved as a message passes through intermediaries. Certain outbound bindings may be incapable of any optimization, and will therefore transmit non-optimized forms in all cases. Other bindings may be capable of optimization, but may or may not choose to optimize the same portions (if any) that were optimized in the inbound message. Other bindings, perhaps under the direction of logic provided in SOAP modules or perhaps as consequence of conventions embodied in the bindings, may optimize portions of the message that were not optimized inbound, or which were optimized using different techniques.
The Optimized MIME Multipart/Related Serialization expands upon the Abstract SOAP Transmission Optimization Feature by describing parts of an implementation of this feature using the [XML-binary Optimized Packaging] format as its basis. This specification does not describe a full implementation but is intended to provide support for building a full implementation of the Abstract SOAP Transmission Optimization Feature. In particular, this specification does not specify the use of any transport for the SOAP message. A full implementation based on this specification is described in 4.2 HTTP SOAP Transmission Optimization Feature Name.
The Optimized MIME Multipart/Related Serialization provides the basis for an implementation of the Abstract Transmission Optimization Feature by describing how to serialize a SOAP envelope in an optimized way, using the [XML-binary Optimized Packaging] format and a MIME Multipart/Related packaging ([RFC 2387]).
More specifically, the SOAP envelope Infoset is transmitted as a MIME Multipart/Related XOP Package (see [XML-binary Optimized Packaging], 4.1 MIME Multipart/Related XOP Packages). Any W3C recommendation-level version of XML is allowed for storing the XOP Infoset created from the SOAP envelope Infoset into the MIME Multipart/Related XOP Package, however, note that the SOAP envelope Infoset MUST be serializable as XML 1.0.
When sending a SOAP message using the MIME Multipart/Related Serialization, the SOAP envelope Infoset is serialized as specified in [XML-binary Optimized Packaging] 3.1 Creating XOP packages. Specifically:
The result is a MIME Multipart/Related XOP package (see [XML-binary Optimized Packaging]): one body part, the root, containing an XML representation of the modified SOAP envelope, with an additional part used to contain the binary representation of each element that was optimized.
When receiving a SOAP message using this Optimized MIME Multipart/Related Serialization, the SOAP Envelope Infoset is reconstructed from the MIME Multipart/Related XOP Package by performing the processing specified in [XML-binary Optimized Packaging] 3.2 Interpreting XOP packages.
Note: conventions or error reporting mechanisms to be used in processing packages that incorrectly purport to be XOP Packages containing a SOAP Envelope are beyond the scope of this specification.
The HTTP SOAP Transmission Optimization Feature is a binding-level feature implementing the Abstract SOAP Transmission Optimization Feature in an HTTP binding. The basis of this HTTP SOAP Transmission Optimization Feature is the Optimized MIME Multipart/Related Serialization described in 3 An Optimized MIME Multipart/Related Serialization of SOAP Messages.
This HTTP SOAP Transmission Optimization Feature builds upon the current HTTP binding (see [SOAP Version 1.2 Part 2: Adjuncts] 7. SOAP HTTP Binding), enhancing it with the support of the Abstract SOAP Transmission Optimization Feature. In all aspects not described in this section, the rules of the HTTP binding are not modified.
This HTTP SOAP Transmission Optimization Feature is identified by the URI:
"http://www.w3.org/2004/08/soap/features/http-optimization".
The HTTP SOAP Transmission Optimization Feature uses the Optimized MIME Multipart/Related Serialization (see 3 An Optimized MIME Multipart/Related Serialization of SOAP Messages) for implementing the Abstract SOAP Transmission Optimization Feature. On the sending side, this feature serializes the SOAP message as described in 3.2 Serialization of a SOAP message and puts the MIME headers of the resulting MIME Multipart/Related XOP Package in as HTTP headers and the rest of the package into the HTTP body. On the receiving side, this feature extracts the MIME headers from the HTTP headers and the rest of the MIME Multipart/Related XOP Package from the HTTP body and deserializes as described in 3.3 Deserialization of a SOAP message.
When sending a SOAP message, the HTTP SOAP Transmission Optimization Feature changes the behavior of [SOAP Version 1.2 Part 2: Adjuncts] 7. SOAP HTTP Binding. This section describes the perturbations to [SOAP Version 1.2 Part 2: Adjuncts] 7.5.1 Behavior of Requesting SOAP Node that result from use of the HTTP SOAP Transmission Optimization Feature. Only those aspects described below differ from the existing operation of the HTTP binding, all other aspects of its operation remaining unchanged.
In the "Init" state, a HTTP request is formulated and transmission of the request is initiated. When using the HTTP SOAP Transmission Optimization Feature, the formulation of the request differs from [SOAP Version 1.2 Part 2: Adjuncts] 7.5.1.1 Init as shown in [HTTP Request Fields].
Field | Value |
---|---|
Content-Type header field | multipart/related |
HTTP entity body | SOAP message serialized as described in 3 An Optimized MIME Multipart/Related Serialization of SOAP Messages |
The XOP package is constructed as described in 3 An Optimized MIME Multipart/Related Serialization of SOAP Messages with the following restriction:
The XOP Infoset MUST be serialized as
application/xop+xml
in the root part of the
package per Section 5 of [XML-binary Optimized Packaging].
Each optimized Node MUST generate exactly one
extracted binary part in the resulting package, i.e.,
extracted binary parts MUST NOT be referenced by more than
one xop:Include
in the SOAP message part.
Each MIME part that is refered to by xop:Include
MUST have a Content-Transfer-Encoding header field.
Note: this does not preclude the MIME Multipart/Related package
from including additional parts not referenced by a
xop:Include
element. Such additional parts are not part of
the SOAP message Infoset and are not included in the SOAP
processing model.
Implementations of this binding MUST enforce the restriction that
XOP is not to be used with Infosets that contain element
information items of name xop:Include
(see
[XML-binary Optimized Packaging] 3.
XOP Infosets Constructs). In any case where a SOAP
envelope containing such an element information item
is to be sent, the binding MUST do one of the following:
application/soap+xml
media type
or any other suitable media type, i.e., send the SOAP envelope
without using the HTTP SOAP Transmission Optimization Feature.
Note that such SOAP envelopes could in principle arise either from data created locally at the sending node or in data relayed at an intermediary. Bindings are responsible for checking all such input as necessary to ensure that the rule just stated is enforced.
When receiving a SOAP message, an implementation of the SOAP HTTP
Binding (see [SOAP Version 1.2 Part 2: Adjuncts]) will determine whether
the HTTP SOAP Transmission Optimization Feature is used by checking the
presence of the application/xop+xml
media type (see
[XML-binary Optimized Packaging] Section 5.1). If the media type of the HTTP message is "multipart/related"
and the media type of the root part of the MIME Multipart/Related
package is application/xop+xml
, and the start-info parameter
indicates a content type of "application/soap+xml" then the received
SOAP message was transmitted using the HTTP SOAP Transmission
Optimization Feature and MUST be processed accordingly.
The HTTP SOAP Transmission Optimization Feature changes the behavior of [SOAP Version 1.2 Part 2: Adjuncts] 7. SOAP HTTP Binding for the reception of a SOAP message. The perturbations to [SOAP Version 1.2 Part 2: Adjuncts] 7.5.2 Behavior of Responding SOAP Node that result from use of the HTTP SOAP Transmission Optimization Feature are as follows:
When making an abstraction of the request message available in
http://www.w3.org/2003/05/soap/mep/InboundMessage
, the
HTTP Binding MUST reconstruct the SOAP Envelope Infoset as
described in 3.3 Deserialization of a SOAP message.
All other aspects of the operation of the HTTP binding remain unchanged.
This specification is the work of the W3C XML Protocol Working Group.
Participants in the Working Group are (at the time of writing, and by alphabetical order): David Fallside (IBM), Tony Graham (Sun Microsystems), Martin Gudgin (Microsoft Corporation, formerly of DevelopMentor), Marc Hadley (Sun Microsystems), Gerd Hoelzing (SAP AG), John Ibbotson (IBM), Anish Karmarkar (Oracle), Suresh Kodichath (IONA Technologies), Yves Lafon (W3C), Michael Mahan (Nokia), Noah Mendelsohn (IBM, formerly of Lotus Development), Jeff Mischkinsky (Oracle), Jean-Jacques Moreau (Canon), Mark Nottingham (BEA Systems, formerly of Akamai Technologies), David Orchard (BEA Systems, formerly of Jamcracker), Herve Ruellan (Canon), Jeff Schlimmer (Microsoft Corporation), Pete Wenzel (SeeBeyond), Volker Wiechers (SAP AG).
Previous participants were: Yasser alSafadi (Philips Research), Bill Anderson (Xerox), Vidur Apparao (Netscape), Camilo Arbelaez (webMethods), Mark Baker (Idokorro Mobile, Inc., formerly of Sun Microsystems), Philippe Bedu (EDF (Electricite De France)), Olivier Boudeville (EDF (Electricite De France)), Carine Bournez (W3C), Don Box (Microsoft Corporation, formerly of DevelopMentor), Tom Breuel (Xerox), Dick Brooks (Group 8760), Winston Bumpus (Novell, Inc.), David Burdett (Commerce One), Charles Campbell (Informix Software), Alex Ceponkus (Bowstreet), Michael Champion (Software AG), David Chappell (Sonic Software), Miles Chaston (Epicentric), David Clay (Oracle), David Cleary (Progress Software), Dave Cleary (webMethods), Ugo Corda (Xerox), Paul Cotton (Microsoft Corporation), Fransisco Cubera (IBM), Jim d'Augustine (Excelon Corporation), Ron Daniel (Interwoven), Glen Daniels (Macromedia), Doug Davis (IBM), Ray Denenberg (Library of Congress), Paul Denning (MITRE Corporation), Frank DeRose (TIBCO Software, Inc.), Mike Dierken (DataChannel), Andrew Eisenberg (Progress Software), Brian Eisenberg (DataChannel), Colleen Evans (Sonic Software), John Evdemon (XMLSolutions), David Ezell (Hewlett Packard), James Falek (TIBCO Software, Inc.), Eric Fedok (Active Data Exchange), Chris Ferris (Sun Microsystems), Daniela Florescu (Propel), Dan Frantz (BEA Systems), Michael Freeman (Engenia Software), Dietmar Gaertner (Software AG), Scott Golubock (Epicentric), Mike Greenberg (IONA Technologies), Rich Greenfield (Library of Congress), Hugo Haas (W3C), Mark Hale (Interwoven), Randy Hall (Intel), Bjoern Heckel (Epicentric), Frederick Hirsch (Zolera Systems), Erin Hoffmann (Tradia Inc.), Steve Hole (MessagingDirect Ltd.), Mary Holstege (Calico Commerce), Jim Hughes (Fujitsu Limited), Oisin Hurley (IONA Technologies), Yin-Leng Husband (Hewlett Packard, formerly of Compaq), Ryuji Inoue (Matsushita Electric Industrial Co., Ltd.), Scott Isaacson (Novell, Inc.), Kazunori Iwasa (Fujitsu Limited), Murali Janakiraman (Rogue Wave), Mario Jeckle (DaimlerChrysler Research and Technology), Eric Jenkins (Engenia Software), Mark Jones (AT&T), Jay Kasi (Commerce One), Jeffrey Kay (Engenia Software), Richard Koo (Vitria Technology Inc.), Jacek Kopecky (Systinet), Alan Kropp (Epicentric), Julian Kumar (Epicentric), Peter Lecuyer (Progress Software), Tony Lee (Vitria Technology Inc.), Michah Lerner (AT&T), Bob Lojek (Intalio Inc.), Henry Lowe (OMG), Brad Lund (Intel), Matthew MacKenzie (XMLGlobal Technologies), Murray Maloney (Commerce One), Richard Martin (Active Data Exchange), Alex Milowski (Lexica), Kevin Mitchell (XMLSolutions), Nilo Mitra (Ericsson), Ed Mooney (Sun Microsystems), Dean Moses (Epicentric), Highland Mary Mountain (Intel), Don Mullen (TIBCO Software, Inc.), Rekha Nagarajan (Calico Commerce), Raj Nair (Cisco Systems), Masahiko Narita (Fujitsu Limited), Mark Needleman (Data Research Associates), Art Nevarez (Novell, Inc.), Eric Newcomer (IONA Technologies), Henrik Nielsen (Microsoft Corporation), Conleth O'Connell (Vignette), Kevin Perkins (Compaq), Jags Ramnaryan (BEA Systems), Andreas Riegg (DaimlerChrysler Research and Technology), Vilhelm Rosenqvist (NCR), Marwan Sabbouh (MITRE Corporation), Waqar Sadiq (Vitria Technology Inc.), Rich Salz (Zolera Systems), Krishna Sankar (Cisco Systems), George Scott (Tradia Inc.), Shane Sesta (Active Data Exchange), Lew Shannon (NCR), John-Paul Sicotte (MessagingDirect Ltd.), Miroslav Simek (Systinet), Simeon Simeonov (Macromedia), Aaron Skonnard (DevelopMentor), Nick Smilonich (Unisys), Seumas Soltysik (IONA Technologies), Soumitro Tagore (Informix Software), James Tauber (Bowstreet), Anne Thomas Manes (Sun Microsystems), Lynne Thompson (Unisys), Patrick Thompson (Rogue Wave), Jim Trezzo (Oracle), Asir Vedamuthu (webMethods), Randy Waldrop (WebMethods), Fred Waskiewicz (OMG), David Webber (XMLGlobal Technologies), Ray Whitmer (Netscape), Stuart Williams (Hewlett Packard), Yan Xu (DataChannel), Amr Yassin (Philips Research), Susan Yee (Active Data Exchange), Jin Yu (MartSoft Corp.).
The people who have contributed to discussions on xml-dist-app@w3.org are also gratefully acknowledged.