This document is also available in these non-normative formats: XML.
Copyright © 2007 W3C® (MIT, INRIA, Keio), All Rights Reserved. W3C liability, trademark, document use, and software licensing rules apply.
This finding addresses several questions regarding Uniform Resource Identifiers (URIs). Specifically, what information about a resource can or should be embedded in its URI? What metadata can be reliably determined from a URI, and in what circumstances is it appropriate to rely on the correctness of such information? In what circumstances is it appropriate to use information from a URI as a hint as to the nature of a resource or its representations? Simple examples are used to explain the tradeoffs involved in employing such metadata in URIs.
This document has been produced by the W3C Technical Architecture Group (TAG) to address TAG issue metadataInURI-31. The TAG approved this finding at its 11 December 2006 face to face meeting.
The terms MUST, MUST NOT, SHOULD, and SHOULD NOT are used in this document in accordance with [RFC2119].
Additional TAG findings, both approved and in draft state, may also be available. The TAG may incorporate this and other findings into future versions of the [AWWW].
Please send comments on this finding to the publicly archived TAG mailing list www-tag@w3.org (archive).
1 Introduction
2 Encoding and using metadata in URIs
2.1 Reliability of URI metadata
2.2 Guessing information from a URI
2.3 HTML Forms, and Documenting Metadata Assignment Policies
2.4 Authority use of URI metadata
2.5 URIs that are convenient for people to use
2.6 Changing metadata
2.7 Hiding metadata for security reasons
2.8 Confusing or malicious metadata
3 Conclusions
4 References
Web-based software uses URIs to identify resources. The authority who assigns a URI is responsible for assuring that it is associated with the intended resource, and that operations targeted to the URI manipulate or return the appropriate data. Many URI schemes offer a flexible structure that can also be used to carry additional information, called metadata, about the resource. Such metadata might include the title of a document, the creation date of the resource, the MIME media type that is likely to be returned by an HTTP GET, a digital signature usable to verify the integrity or authorship of the resource content, or hints about URI assignment policies that would allow one to guess the URIs for related resources.
This finding addresses several questions regarding such metadata in URIs:
What information about a resource can or should be embedded in its URI?
What metadata can be reliably determined from a URI, and in what circumstances is it appropriate to rely on the correctness of such information?
In what circumstances is it appropriate to use information from a URI as a hint as to the nature of a resource or its representations?
The first question is primarily of concern to URI assignment authorities, who must choose a suitable URI for each resource they control. The other questions are focused on people and software making use of URIs, whether at the resource authority or elsewhere. Of course, the questions are related insofar as one reason for an authority to encode metadata is for the benefit of resource users.
The TAG has earlier published a finding Authoritative Metadata [AUTHMETA], which explains how to determine correct metadata in cases where conflicting information has been provided. This finding is concerned with just one possible means of determining resource metadata, i.e. from the URI itself. The TAG publication [AWWW] discusses related issues under the heading of URI Opacity; this finding provides additional detail and guidance on the encoding of metadata into URIs, and on when it is or isn't appropriate to attempt to infer metadata from a URI.
This section uses simple examples to illustrate some issues that arise when encoding metadata in URIs, or when relying on information gleaned from such URIs. Good Practice Notes are provided to explain how to use the Web effectively, and Constraints are given where necessary for using the Web correctly. As these examples show, encoding or not encoding metadata in a URI or deciding whether to rely on such metadata is often a tradeoff, involving some benefits and some costs. In such cases, choices should be made that best meet the needs of particular resource providers and users.
Consider Martin, who is using a Web-based bug tracking system to investigate some software problems. He sees a bug report which says:
The bug tracking system is built to show examples just as they are entered
into the system, so for http://example.org/bugdata/brokenfile.xml it returns
a stream of (poorly formed) XML with Content-Type text/plain
.
That Content-Type should cause a properly configured browser
to show Martin the erroneous text just as it was recorded:
<?xml version="1.0"> <PetList> <Dog>Rover</Dog> <Cat>Felix</Fish> </PetList>
Unfortunately, Martin uses a browser that incorrectly attempts to infer the format of the returned data from the URI suffix. Keying on the ".xml" in the URI, it launches an XML renderer for what should have been plain text. When Martin attempts to view the faulty file, he sees instead a browser error saying that the erroneous XML could not be displayed.
Constraint
Constraint: Web software MUST NOT depend on the correctness of metadata inferred from a URI, except when the encoding of such metadata is documented by applicable standards and specifications.
Such standards and specifications include pertinent Web and Internet RFCs and Recommendations such as [URI], as well as documentation provided by the URI assignment authority.
Martin's browser is in error because its inference that the URI suffix provides file type metadata is not provided for by normative Web specifications or, we may assume, in documentation from the assignment authority. A correctly written browser would have shown the faulty XML as text, or might conceivably have shown a warning about the apparent mismatch between the type inferred from the URI and the returned Content-Type. (Martin's browser is also ignoring TAG finding "Authoritative Metadata" [AUTHMETA], which mandates that the Content-Type HTTP header takes precedence even if type information had somehow been reliably encoded in the URI.)
Note that the constraint refers to conclusions drawn by software, which must be trustworthy, as opposed to guesses made by people. As discussed in 2.2 Guessing information from a URI, guessing is something that people using the Web do quite often and for good reason. Software tends to be long lived and widely distributed. Thus software dependencies on undocumented URI metadata result not only in buggy systems, but in inappropriate expectations that authorities will constrain their URI assignment policies and representation types to match dependencies in the clients. For both of these reasons, the constraint above requires that software must not have such dependencies.
There is certain metadata that Martin or his browser can reliably determine from the URI. For example, the URI conveys that the http scheme has been used, and that attempts to access the resource should be directed to the IP address returned from the DNS resolution of the string "example.org". These conclusions are supported by normative specifications such as [URI] and [HTTP].
Bob is walking down a street, and he sees an advertisement on the side of a bus:
Bob goes home and types the URI into his browser, which does indeed
display for him a Chicago weather forecast.
Bob then realizes that he'll be visiting Boston, and he guesses that a Boston weather page might be available at a similar URI:
http://example.org/weather/Boston
.
He types that into his browser and reads the response that comes back.
Bob is using the original URI for more than its intended purpose, which is to identify the Chicago weather page. Instead, he's inferring from it information about the structure of a Web site that, he guesses, might use a uniform naming convention for the weather in lots of cities. So, when Bob tries the Boston URI, he has to be prepared for the possibility that his guess will prove wrong: Web architecture does not guarantee that the retrieved page, if there is one, has the weather for Boston, or indeed that it contains any weather report at all. Even if it does, there is no assurance that it is current weather, that it is intended for reliable use by consumers, etc. Bob has seen an advertisement listing just the Chicago URI, and that is the only one that the URI authority has warranted will be a useful weather report.
Still, the ability to explore the Web informally and experimentally is very valuable, and Web users act on such guesses about URIs all the time. Many authorities facilitate such flexible use of the Web by assigning URIs in an orderly and predictable manner. Nonetheless, in the example above, Bob is responsible for determining whether the information returned is indeed what he needs.
Bob would not have had to guess the Boston weather URI if the authority had documented its URI assignment policy. Assignment authorities have no obligation to provide such documentation, but it can be a useful way of advertising in bulk the URIs for a collection of related resources. For example, an advertisement might read:
Reading that advertisement, Bob can reasonably assume that
weather reports are available by substituting specific
city names into the URI pattern http://example.org/weather/your-city-name-here
.
Moreover, the advertisement claims that the weather information
obtainable at those URIs is "the best", so Bob can
assume that the weather reports are trustworthy and current.
HTML forms [HTMLForms] and now XForms [XFORMS]
each provide a means by which an authority can
assert its support
for a class of parameterized URIs,
while simultaneously
programming Web clients to prompt for the necessary parameters.
For example, a Web site http://example.org/weatherfinder
might offer
a city lookup page containing the following HTML form fragment:
<FORM ACTION="http://example.org/cityweather" METHOD="GET"> For what city would you like a weather report: <INPUT TYPE="TEXT" NAME="city"/>? <INPUT TYPE="SUBMIT" VALUE="Get the weather"/> </FORM>
A browser receiving this form, or Bob if he views the source of the form, is assured that the assigning authority is supporting an entire class of URIs of the form:
http://example.org/cityweather?city=CityName
The same HTML Form is also a computer program, executable by the browser, that prompts for and retrieves representations for all such URIs, and the English text in the form assures Bob that these are indeed for weather reports. Bob is not guessing the encoding of the URI or the nature of the resources referenced — he is acting on authoritative information provided by the assignor of the URIs. He can assume not just that he will get weather reports for certain cities, but that no URIs in the class correspond to anything other than weather reports (though some may correspond to no resource at all). Bob could, with this assurance, write his own software to construct and use such URIs to retrieve weather reports. Of course, the typical Web user would neither directly inspect the URIs nor write software to build them, but would instead type in city names and push the handy "Get the weather" button on his or her browser screen.
Note that the example carefully specifies that the
HTML form is sourced from the same authority as the
individual weather URIs that the form queries.
In fact, it is also common for
the ACTION
attributes in HTML forms to refer to URIs
from other authorities.
In such cases, it is the provider of the form rather than the
assigning authority for the queried URIs who is responsible for the claims
made in the form.
In particular, users (and software)
should check the origin of HTML forms before depending on the URI assignment
patterns that they appear to imply.
Of course, you can always use such a form to perform a query and see
what comes back;
what you can't do is blame the assignment authority if the generated
URIs either don't
resolve (status code 404)
or return representations that don't
match the expectations established when reading the
form (you got a football score instead of a weather report).
In the examples in 2.3 HTML Forms, and Documenting Metadata Assignment Policies above, resource metadata (I.e. the city associated with each resource) was encoded into URIs primarily for the benefit of users such as Bob, or to facilitate use of the HTML Forms or XForms acting on those users' behalf.
Often, metadata is encoded into a URI not primarily for the benefit of users, but to facilitate management of the resources themselves. For example, assume that the administrators at example.org have established a policy of assigning URIs based on the media types of representations: all GIF images are named with URIs ending in ".gif", and all JPEG images are named with URIs ending in ".jpeg", and so on. Although 2.1 Reliability of URI metadata warned that users of a resource cannot rely on undocumented naming conventions to determine media types and other information about a resource, the owner of a resource controls such naming and can depend on it. Example.org may therefore rely on their policy in an Apache Web Server .htaccess file, which causes the correct media type to be served automatically for each resource:
<Files ~ ".*\.gif"> ForceType 'image/gif' </Files> <Files ~ ".*\.jpg"> ForceType 'image/jpeg' </Files>
Even if it does not document this policy publicly, example.org's own Web servers can safely depend on it.
Good Practice
Good Practice: URI assignment authorities and the Web servers deployed for them may benefit from an orderly mapping from resource metadata into URIs.
In addition to filename-based conventions, authorities may choose to base URIs on database keys, customer identifiers, or other information that makes it easy to associate a URI with information pertinent to the corresponding resource. Such encodings are both useful and common on the Web, but there can also be drawbacks to including such information in URIs. Some of those problems are discussed in the three sections immediately below.
URIs optimized for use by the assignment authority may sometimes be inconvenient for resource users. Consider Mary who is walking down the street, and who sees the same weather advertisement as Bob:
Like Bob, Mary is pleased to learn about a valuable Web site, and she finds that the URI itself is quite easy both to remember and to type into her browser. This is because, in addition to the required scheme and authority components, the URI is based on the word weather and the city name Chicago, both of which fit her expectations for this resource.
The next day, Mary sees another advertisement reading:
Mary is annoyed, because the URI is both difficult to remember and hard to transcribe accurately. She guesses that the authority has assigned this URI for its own convenience (see 2.4 Authority use of URI metadata) rather than for hers. Although Web architecture does not require that URIs be easy to understand or suggestive of the resource named, it's handy if those intended for direct use by people are.
Good Practice
Good Practice: URIs intended for direct use by people should be easy to understand, and should be suggestive of the resource actually named.
Note that the second URI might be based on a database key that facilitates efficient access to the weather data at the server (see 2.4 Authority use of URI metadata); such a URI might have been a good choice if it were intended only for use in HTML hyperlinks, rather than in an advertisement on the side of a bus.
URIs should generally not encode metadata that will change, regardless of whether the encoding policy is established to benefit URI assignment authorities, resource users, or both. Consider a Web site that organizes document URIs according to the documents' lead author or editor. Thus, the documents:
http://example.org/documents/editor/BobSmith/document1 http://example.org/documents/editor/BobSmith/document2
are named for their editor, Bob Smith. Bob retires, and Mary Jones takes over as editor for document1. If the URI is changed to encode her name, then existing links break, but if the URI is not changed, the naming policy is violated. By encoding into the URI metadata that will change, the authority has put itself in a difficult position.
Good Practice
Good Practice: Resource metadata that will change SHOULD NOT be encoded in a URI.
Indeed, RDF statements about the resource, headers returned with representations (e.g. Content-Type) or metadata embedded in the representations themselves (e.g. HTML <META> tags) are all better alternatives for conveying such volatile metadata about the resource.
A bank establishes a URI assignment policy in which account numbers are encoded directly in the URI. For example, the URI http://example.org/customeraccounts/456123 accesses information for account number 456123. A malicious worker at an Internet Service Provider notices these URIs in his traffic logs, and determines the bank account numbers for his Internet customers. Furthermore, if access controls are not properly in place, he might be able to guess the URIs for other accounts, and to attempt to access them.
Good Practice
Good Practice: URI assignment authorities SHOULD NOT put into URIs metadata that is to be kept confidential.
Although a URI suffix such as .jpeg
or .exe
plays no role in establishing the media type of a Web resource,
such suffixes are often significant in operating system filenames.
This inconsistency can be confusing to users, and may in some cases be exploited by malicious Web sites to cause harm.
Consider Ed, who browses to an HTML page that includes an image of his favorite movie star.
Underneath the picture is a suggestion that Ed "Right click on the picture and select 'Save as' to save a copy of this picture on your local disk".
The HTML sent to the browser is:
<img src="./moviestar.exe" /> <p> Right click on the picture and select 'Save as' to save a copy of this picture on your local disk. </p>
Unfortunately, the Web site is attempting to trick Ed's browser into saving the retrieved data not as an image file, but as an executable. Specifically, the site is gambling on the possibility that his browser will preserve the .exe extension when saving the file, and that such an extension will cause his operating system to treat the file as executable.
When saving information from the Web,
browsers must preserve to the extent practical the authoritative typing information provided with the representation.
As discussed in 2.1 Reliability of URI metadata, the Content-Type is the authoritative source of type information in this example. If the local operating system considers filename extensions to be significant, then either .jpeg or .jpg is more likely
to be the appropriate choice for a resource of media type image/jpeg
, regardless of what suffix
may appear in the URI.
Good Practice
Good Practice: When saving to filesystems that use extensions to represent media types, user agents MUST choose an extension that is consistent with the media type of the representation.
Indeed, many modern browsers suggest a name such as moviestar.exe.jpeg
when saving the example file above.
Nonetheless, it is inappropriate for Web sites to intentionally mislead
users.
Although naming an image/jpeg
file with a URI ending in
.exe
is not prohibited by Web architecture, doing so with
the intention to deceive users or to compromise their systems is
of course not acceptable.
Note that the example above is contrived in at least one respect: to achieve its malicious goals, the Web site must serve a file that displays as an image in the browser, but that also runs as an executable after being saved to the local filesystem. Whether this is possible in practice is likely to depend on the exact image format and operating system involved. A slightly more complex approach to achieving a similar deception involves sending Ed an image that serves as a link to a separate executable. For example:
<a href="./malicious.exe"> <img src="./moviestar.jpg"/> </a> <p> Click on the picture to see a larger copy of the picture. </p>
The executable served for malicious.exe
may in fact render a larger image
of the movie star, but it could also be programmed to damage Ed's computer.
For the reasons described above, the correct way for Ed's browser
to determine the type of the linked representation, which in this case
may indeed be executable, is from the media-type.
Of course, a well-written agent will warn users before executing
any code retrieved from the Web, regardless of whether
the determination of its type was made in the appropriate
manner or
inappropriately from the URI suffix.
The principle conclusions of this finding are:
It is legitimate for assignment authorities to encode static identifying properties of a resource, e.g. author, version, or creation date, within the URIs they assign. This may contribute to the unique assignment of URIs. It may also contribute to the use of efficient mechanisms for dereferencing resources within origin servers e.g. use of database keys within URIs.
Assignment authorities may publish specifications detailing the structure and semantics of the URIs they assign. Other users of those URIs may use such specifications to infer information about resources identified by URI assigned by that authority.
The ability to explore and experiment is important to Web users. Users therefore benefit from the ability to infer either the nature of the named resource, or the likely URI of other resources, from inspection of a URI. Such inferences are reliable only when supported by normative specifications or by documentation from the assignment authorities. In other cases, users should be aware that their inferences may be incorrect and the effect could be malicious.
People and software using URIs assigned outside of their own authority should make as few inferences as possible about a resource based on its URI. The more dependencies a piece of software has on particular constraints and inferences, the more fragile it becomes to change and the lower its generic utility.